Lessons learned in the design and erection of box girder bridges from the West Gate collapse

Thesis (M. Eng.)--Massachusetts Institute of Technology, Dept. of Civil and Environmental Engineering, 2007.

Bibliographic Details
Main Author: Burton, Alia Christine
Other Authors: Jerome J. Connor.
Format: Thesis
Language:eng
Published: Massachusetts Institute of Technology 2007
Subjects:
Online Access:http://hdl.handle.net/1721.1/38943
_version_ 1811072963445784576
author Burton, Alia Christine
author2 Jerome J. Connor.
author_facet Jerome J. Connor.
Burton, Alia Christine
author_sort Burton, Alia Christine
collection MIT
description Thesis (M. Eng.)--Massachusetts Institute of Technology, Dept. of Civil and Environmental Engineering, 2007.
first_indexed 2024-09-23T09:24:41Z
format Thesis
id mit-1721.1/38943
institution Massachusetts Institute of Technology
language eng
last_indexed 2024-09-23T09:24:41Z
publishDate 2007
publisher Massachusetts Institute of Technology
record_format dspace
spelling mit-1721.1/389432019-04-12T20:27:38Z Lessons learned in the design and erection of box girder bridges from the West Gate collapse Burton, Alia Christine Jerome J. Connor. Massachusetts Institute of Technology. Dept. of Civil and Environmental Engineering. Massachusetts Institute of Technology. Dept. of Civil and Environmental Engineering. Civil and Environmental Engineering. Thesis (M. Eng.)--Massachusetts Institute of Technology, Dept. of Civil and Environmental Engineering, 2007. Includes bibliographical references (p. 73-74). The West Gate Bridge, intended to span the Yarra River in Australia, collapsed during its third year of construction in 1970. Investigation into the project revealed numerous issues in the bridge's design and construction. The West Gate Bridge is one of a number of box girder bridges built during the mid 20th century, and was one of four to fail in a three year period. An overview of the design and erection issues is presented, particularly those dealing with thin elements in compression. A comparison of moments and stresses resulting from the use of concrete blocks and jacks to reduce the camber difference encountered on span 10-11 shows that the latter method would have been preferable. The failure of three other box girder bridges between 1969 and 1971, and the required strengthening of dozens of others, reveal the lack of understanding of the slender compressive elements present in such structures. A brief literature review presents the buckling and deformation modes found in stiffened plates under compressive loading, showing the development of understanding of these systems from papers written or published in 1997, 2001, 2004 and 2006 - over three decades after the West Gate collapse. (cont.) Criteria by AASHTO and by B. H. Choi and C. H. Yoo for the minimum moment of inertia of longitudinal and transverse stiffeners of box girders are presented. The resulting values are compared to the moment of inertia of sections used to strengthen the West Gate Bridge after the collapse of a similar bridge. This comparison shows that the requirements are quite sensitive to scale and can provide inconsistent requirements for stiffness. Thus, there is currently a lack of guidance and regulation from codes for the design of wider single-cell box girders. The complex and non-linear nature of the slender elements in compression used in box girders does not allow the extrapolation of simpler rules developed for the design of smaller bridges. Despite the complex behavior of box girders, they offer a number of advantages and further research is needed to improve their analysis, design, construction, repair and maintenance. by Alia Christine Burton. M.Eng. 2007-09-28T13:15:52Z 2007-09-28T13:15:52Z 2007 2007 Thesis http://hdl.handle.net/1721.1/38943 166268988 eng M.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission. http://dspace.mit.edu/handle/1721.1/7582 96 p. application/pdf u-at--- Massachusetts Institute of Technology
spellingShingle Civil and Environmental Engineering.
Burton, Alia Christine
Lessons learned in the design and erection of box girder bridges from the West Gate collapse
title Lessons learned in the design and erection of box girder bridges from the West Gate collapse
title_full Lessons learned in the design and erection of box girder bridges from the West Gate collapse
title_fullStr Lessons learned in the design and erection of box girder bridges from the West Gate collapse
title_full_unstemmed Lessons learned in the design and erection of box girder bridges from the West Gate collapse
title_short Lessons learned in the design and erection of box girder bridges from the West Gate collapse
title_sort lessons learned in the design and erection of box girder bridges from the west gate collapse
topic Civil and Environmental Engineering.
url http://hdl.handle.net/1721.1/38943
work_keys_str_mv AT burtonaliachristine lessonslearnedinthedesignanderectionofboxgirderbridgesfromthewestgatecollapse