Modeling deposit formation in diesel injector nozzle

Modeling deposit formation in diesel injector nozzle

Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Aeronautics and Astronautics, 2009.

Bibliographic Details
Main Author:	Sudhiesh Kumar, Chintoo
Other Authors:	Wai K. Cheng and Choon Sooi Tan.
Format:	Thesis
Language:	eng
Published:	Massachusetts Institute of Technology 2010
Subjects:	Aeronautics and Astronautics.
Online Access:	http://hdl.handle.net/1721.1/51638

Similar Items

Study of deposit formation inside diesel injectors nozzles
by: Wang, YinChun, Ph. D. Massachusetts Institute of Technology
Published: (2013)

Impact of biodiesel on injector deposit formation
by: Liaquat, A.M., et al.
Published: (2012)

Modeling of mixer-ejector nozzle flows
by: Fung, Andrew Kang
Published: (2005)

A study of the spray characteristic for valve covered orifice diesel nozzle injector using CFD
by: Ahmad Aizuddin Faiz, Che Jaafar
Published: (2013)

Injector deposit formation in gasoline direct injection engines
by: Jamroz, Przemek R., 1977-
Published: (2014)

Aeroacoustic measurement and analysis of transient supersonic hot nozzle flows
by: Kirk, Daniel Robert, 1975-
Published: (2006)

Analysis of mixing and thrust diagnostics for shock tunnel hot nozzle testing
by: Creviston, Douglas Orie, 1975-
Published: (2009)

A numerical investigation of weak shock wave effects in reacting nozzle flows
by: Foutter, Richard R. (Richard Robert)
Published: (2010)

An adsorption-precipitation model for the formation of injector external deposits in internal combustion engines
by: Slavchov, Radomir I., et al.
Published: (2019)

System modeling, analysis, and optimization methodology for diesel exhaust after-treatment technologies
by: Graff, Christopher Dominic
Published: (2007)

Computational fluid dynamic modelling of NOx formation in diesel engine
by: S. S., Hoseini, et al.
Published: (2020)

An investigation of the effects of nozzle guide vane trailing edge cooling on rotor heat transfer in a transonic turbine stage
by: Gleixner, Aaron J. (Aaron James)
Published: (2008)

Design and development of high pressure natural gas injector model for single cylinder four stroke engine using matlab simulink
by: Mohd Nor Afiq, Nor Hashim
Published: (2012)

Model predictive control for formation flying spacecraft
by: Breger, Louis Scott, 1979-
Published: (2005)

Magnet device to reduce diesel consumption in diesel engine
by: Ponnusamy, Barath
Published: (2011)

A study of diesel heat transfer distribution using a rapid compression machine
by: Wolf, Robert S
Published: (2007)

Velocity measurements of diffraction patterns on scattering of helium nozzle beam from (001) LiF cleavage plane by time of flight technique using metastable atoms.
by: Wang, James Chung-Fang.
Published: (2023)

Simulation of gaseous fuel injector geometries of mult holes nozzle by using CNG engine
by: Muhamad Akhbar Osman, Md. Hashim
Published: (2009)

Development and analysis of a high fidelity linearized J₂ model for satellite formation flying
by: Schweighart, Samuel A. (Samuel Adam), 1977-
Published: (2013)

Study on spray nozzle of diesel engine
by: Nur Syafiqah, Mohd Nawawi
Published: (2011)

Deposition, crystallization and nanoindentation of substrate-bound biomolecule-assembled nanomaterials
by: Lewis, Diana J. (Diana Jean)
Published: (2020)

Dynamics and control of electromagnetic satellite formations
by: Ahsun, Umair, 1972-
Published: (2008)

Electromagnetic formation flight of satellite arrays
by: Kwon, Daniel W., 1980-
Published: (2006)

Conceptual development of a pressure-swirl injector for a two-stroke GDI engine
by: Abdul Aziz, Azhar, et al.
Published: (2006)

Electromagnetic formation flight dipole solution planning
by: Schweighart, Samuel A. (Samuel Adam), 1977-
Published: (2006)

Micro-electromagnetic formation flight of satellite systems
by: Sakaguchi, Aya, S.M. Massachusetts Institute of Technology
Published: (2007)

Spacecraft formation flight exploiting potential fields
by: Kong, Edmund Mun Choong, 1973-
Published: (2005)

Investigation of diesel injector flow pattern based on computer-aided design
by: Razali, Mohd Azahari, et al.
Published: (2020)

Analysis of diesel particulate matter on single cylinder diesel engine using waste plastic fuel
by: Mohd Radzi, Mohd Rasol
Published: (2012)

Study of particulate matter formation and evolution in near-field aircraft plumes using a one-dimensional microphysical model
by: Zhang, Jianye, S.M. Massachusetts Institute of Technology
Published: (2007)

Trajectory design and control for formation flying spaceborne interferometers
by: Mandy, Christophe Ph. (Christophe Philippe)
Published: (2010)

Acquisition and control of a precision formation flying mission
by: Field, John M., S.M. Massachusetts Institute of Technology
Published: (2010)

Closed-loop control of spacecraft formations with applications on SPHERES
by: Jeffrey, Matthew M
Published: (2009)

Analysis of relative navigation architectures for formation flying spacecrafts
by: Lefebvre de Plinval-Salgues, Henry Jacques
Published: (2007)

Distribued estimation architectures and algorithms for formation flying spacecraft
by: Mandić, Milan
Published: (2007)

Format evaluation for an airborne air traffic situation display.
by: Anderson, Robert Edward
Published: (2005)

Micropropulsion system selection for precision formation flying satellites
by: Reichbach, Jeffrey (Jeffrey Grant), 1977-
Published: (2013)

Dynamic and thermal control of an electromagnetic formation flight testbed
by: Neave, Matthew D. (Matthew David)
Published: (2006)

Numerical simulation on the spray angle of the dual-layer hole nozzle in a partition combustion system of the diesel Engine
by: Hongkun, Lu, et al.
Published: (2024)

Development of a direct fuel injector for a two-stroke gasoline engine
by: Mohd Ali, Mas Fawzi
Published: (2007)