Improved return passages for multistage centrifugal compressors
Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Aeronautics and Astronautics, 2010.
Main Author: | |
---|---|
Other Authors: | |
Format: | Thesis |
Language: | eng |
Published: |
Massachusetts Institute of Technology
2011
|
Subjects: | |
Online Access: | http://hdl.handle.net/1721.1/62487 |
_version_ | 1826189001889939456 |
---|---|
author | Glass, Benjamin W., S.M. Massachusetts Institute of Technology |
author2 | Edward M. Greitzer. |
author_facet | Edward M. Greitzer. Glass, Benjamin W., S.M. Massachusetts Institute of Technology |
author_sort | Glass, Benjamin W., S.M. Massachusetts Institute of Technology |
collection | MIT |
description | Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Aeronautics and Astronautics, 2010. |
first_indexed | 2024-09-23T08:08:18Z |
format | Thesis |
id | mit-1721.1/62487 |
institution | Massachusetts Institute of Technology |
language | eng |
last_indexed | 2024-09-23T08:08:18Z |
publishDate | 2011 |
publisher | Massachusetts Institute of Technology |
record_format | dspace |
spelling | mit-1721.1/624872019-04-09T16:51:07Z Improved return passages for multistage centrifugal compressors Improved performance return passage for multistage centrifugal compressors Glass, Benjamin W., S.M. Massachusetts Institute of Technology Edward M. Greitzer. Massachusetts Institute of Technology. Dept. of Aeronautics and Astronautics. Massachusetts Institute of Technology. Dept. of Aeronautics and Astronautics. Aeronautics and Astronautics. Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Aeronautics and Astronautics, 2010. Cataloged from PDF version of thesis. Includes bibliographical references (p. 91-93). This thesis presents a design concept for return passages in multistage centrifugal compressors. Flow in a baseline return passage is analyzed to identify loss sources that have substantial potential for reduction. For the geometry analyzed, it is found that mismatched incidence of the return vane, separation on the hub surface at the exit of the return bend, and blockage due to separation on the shroud surface near the return bend inlet lead to losses which have such potential. Preliminary designs were developed and computationally assessed to determine effective geometries for eliminating separation on the hub at the return bend exit and for reducing losses. Then, based on assessment of the preliminary designs, other features of the loss generation were addressed. The geometry proposed includes an increased axial extent of the return bend, an increasing radius of curvature through the return bend, and lean of the return vane leading edge, mitigating the loss mechanisms identified in the baseline return passage. The three-dimensional calculations showed a cumulative loss coefficient that was 10% lower than the baseline. The design described was carried out with a fixed inlet condition, and a second return passage was thus developed to determine the potential loss reduction if the inlet geometry were modified. (The design of the impeller required to achieve the modified inlet flow was not considered.) The cumulative loss coefficient was reduced by 27% compared with the baseline, with the implication that an area for exploration is integration of the impeller and return passage flow fields. by Benjamin W. Glass. S.M. 2011-04-25T16:07:14Z 2011-04-25T16:07:14Z 2010 2010 Thesis http://hdl.handle.net/1721.1/62487 712067845 eng M.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission. http://dspace.mit.edu/handle/1721.1/7582 93 p. application/pdf Massachusetts Institute of Technology |
spellingShingle | Aeronautics and Astronautics. Glass, Benjamin W., S.M. Massachusetts Institute of Technology Improved return passages for multistage centrifugal compressors |
title | Improved return passages for multistage centrifugal compressors |
title_full | Improved return passages for multistage centrifugal compressors |
title_fullStr | Improved return passages for multistage centrifugal compressors |
title_full_unstemmed | Improved return passages for multistage centrifugal compressors |
title_short | Improved return passages for multistage centrifugal compressors |
title_sort | improved return passages for multistage centrifugal compressors |
topic | Aeronautics and Astronautics. |
url | http://hdl.handle.net/1721.1/62487 |
work_keys_str_mv | AT glassbenjaminwsmmassachusettsinstituteoftechnology improvedreturnpassagesformultistagecentrifugalcompressors AT glassbenjaminwsmmassachusettsinstituteoftechnology improvedperformancereturnpassageformultistagecentrifugalcompressors |