Proposed testing method for foam padding
Thesis (S.B.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2011.
| Main Author: | |
|---|---|
| Other Authors: | |
| Format: | Thesis |
| Language: | eng |
| Published: |
Massachusetts Institute of Technology
2012
|
| Subjects: | |
| Online Access: | http://hdl.handle.net/1721.1/69778 |
| _version_ | 1826208320667516928 |
|---|---|
| author | Hyatt, Daniel (Daniel Elliot) |
| author2 | Kim B. Blair. |
| author_facet | Kim B. Blair. Hyatt, Daniel (Daniel Elliot) |
| author_sort | Hyatt, Daniel (Daniel Elliot) |
| collection | MIT |
| description | Thesis (S.B.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2011. |
| first_indexed | 2024-09-23T14:03:56Z |
| format | Thesis |
| id | mit-1721.1/69778 |
| institution | Massachusetts Institute of Technology |
| language | eng |
| last_indexed | 2024-09-23T14:03:56Z |
| publishDate | 2012 |
| publisher | Massachusetts Institute of Technology |
| record_format | dspace |
| spelling | mit-1721.1/697782019-04-10T09:40:49Z Proposed testing method for foam padding Hyatt, Daniel (Daniel Elliot) Kim B. Blair. Massachusetts Institute of Technology. Dept. of Mechanical Engineering. Massachusetts Institute of Technology. Dept. of Mechanical Engineering. Mechanical Engineering. Thesis (S.B.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2011. Cataloged from PDF version of thesis. Includes bibliographical references (p. 31). One very basic necessity for foam padding testing technology is the ability to test two different padding samples and compare the results. The current standard for testing is to use a steel anvil backing for the padding, create an impact and record the parameters of the collision. The standardized method of testing with a steel anvil backing may not truly depict which foam or padding is actually the most protective, and this project aims to demonstrate how using a more humanlike backing produces more accurate test results. The experimentation setup used a projectile shot with a known velocity at various padding samples, where both a steel anvil and urethane foam are used as separate backings for the experiment. The steel anvil represents the current industry testing standard, whereas the urethane foam is meant to physically replicate the characteristics of human flesh. Using a load cell which is calibrated with an oscilloscope, a curve of the force applied over time will be recorded for each test run. From this force curve, the peak force, total impulse, and energy dissipated were calculated for each collision. By comparing these metrics across different foam padding specimens using the two padding backings across different velocities, the effect of varying the padding backing are demonstrated in the experimental results. Although using the steel anvil backing lead to generally similar recommendations for the best padding, it does not capture a lot of the details which are necessary to truly understand how different foam specimens compare with each other. Two main conclusions are drawn regarding the difference between the steel anvil and urethane foam setups: the difference in the shape of the force over time curves and the significance of changing the velocity of the impact. Using the urethane foam backing also established two different regimes which define whether or not the padding user would feel a significant impact. The parameters of these regimes provide the best data for deciding on appropriate foam specimens. The steel anvil backing lacks any capacity to test or predict which impacts are severe enough to cause serious injury. by Daniel Hyatt. S.B. 2012-03-16T16:02:32Z 2012-03-16T16:02:32Z 2011 2011 Thesis http://hdl.handle.net/1721.1/69778 776199569 eng M.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission. http://dspace.mit.edu/handle/1721.1/7582 31 p. application/pdf Massachusetts Institute of Technology |
| spellingShingle | Mechanical Engineering. Hyatt, Daniel (Daniel Elliot) Proposed testing method for foam padding |
| title | Proposed testing method for foam padding |
| title_full | Proposed testing method for foam padding |
| title_fullStr | Proposed testing method for foam padding |
| title_full_unstemmed | Proposed testing method for foam padding |
| title_short | Proposed testing method for foam padding |
| title_sort | proposed testing method for foam padding |
| topic | Mechanical Engineering. |
| url | http://hdl.handle.net/1721.1/69778 |
| work_keys_str_mv | AT hyattdanieldanielelliot proposedtestingmethodforfoampadding |