Sub-10-nm lithography with light-ion beams
Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2012.
| Main Author: | |
|---|---|
| Other Authors: | |
| Format: | Thesis |
| Language: | eng |
| Published: |
Massachusetts Institute of Technology
2012
|
| Subjects: | |
| Online Access: | http://hdl.handle.net/1721.1/71495 |
| _version_ | 1826204766421647360 |
|---|---|
| author | Winston, Donald, Ph. D. Massachusetts Institute of Technology |
| author2 | Karl K. Berggren. |
| author_facet | Karl K. Berggren. Winston, Donald, Ph. D. Massachusetts Institute of Technology |
| author_sort | Winston, Donald, Ph. D. Massachusetts Institute of Technology |
| collection | MIT |
| description | Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2012. |
| first_indexed | 2024-09-23T13:00:44Z |
| format | Thesis |
| id | mit-1721.1/71495 |
| institution | Massachusetts Institute of Technology |
| language | eng |
| last_indexed | 2024-09-23T13:00:44Z |
| publishDate | 2012 |
| publisher | Massachusetts Institute of Technology |
| record_format | dspace |
| spelling | mit-1721.1/714952019-04-11T10:35:37Z Sub-10-nm lithography with light-ion beams Winston, Donald, Ph. D. Massachusetts Institute of Technology Karl K. Berggren. Massachusetts Institute of Technology. Dept. of Electrical Engineering and Computer Science. Massachusetts Institute of Technology. Dept. of Electrical Engineering and Computer Science. Electrical Engineering and Computer Science. Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2012. Cataloged from PDF version of thesis. Includes bibliographical references (p. 203-212). Scanning-electron-beam lithography (SEBL) is the workhorse of nanoscale lithography in part because of the high brightness of the Schottky source of electrons, but also benefiting from decades of incremental innovation and engineering of apparatus around the Schottky source. Light ions are an attractive intermediary between electrons and heavy ions in terms of exposure efficiency and resolution by attaining a minimal interaction volume within the resist layer, if only we had bright sources of these light ions and could thus achieve small spot sizes. In this thesis, I present sub-10-nm lithography at high exposure efficiency using the gas field ionization source (GFIS) with helium and neon ions. I also present preliminary results using the magnetooptical trap ion source (MOTIS) with lithium ions. This work has also challenged the understanding of exposure efficiency as directly proportional to the so-called stopping power of incident beam particles - i.e. the average energy loss per unit path length, particularly for thin (less than 20 nm thick) resist. Values of stopping power are readily obtained via the popular Stopping and Range of Ions in Matter (SRIM) software for a variety of beam species and target materials at various landing energies, making this metric particularly convenient for predicting exposure efficiency. However, the exposure efficiency of neon ions for thin hydrogen silsesquioxane (HSQ) resist on bulk silicon is similar to that of gallium ions at 20-30 keV landing energy despite SRIM indicating a much larger stopping power for the gallium ions. Separating stopping power into nuclear and electronic components reveals that both the neon and gallium ions have similar electronic stopping powers. This correspondence points to electronic stopping power as a better indication of exposure efficiency in ion beam lithography. Unfortunately, the use of electronic stopping power alone to predict exposure efficiency has too been challenged by the data. Whereas the exposure efficiencies of neon and gallium ions were much higher than that of helium ions for the landing energies studied, the electronic stopping powers were all similar. One interpretation of this anomaly is that slower ions, i.e. neon and gallium ions in this case, for the same total energy dissipated via ionization per unit path length, produce a redshifted secondary-electron (SE) spectrum (with a correspondingly larger number of SEs), and that these lower-energy SEs are more efficient at exposure of resist. Such a phenomenon would be hidden by reliance on a single number, the electronic stopping power, to predict exposure efficiency. In addition to demonstrating sub-10-nm lithography at high exposure efficiency with light-ion beams, this thesis provides data toward predicting exposure efficiency in charged-particle-beam lithography in a way that is as simple as possible, but not simpler, using point exposures in a thin-film, high-contrast resist process. In contrast with SEBL, the lithographic techniques presented in this thesis are at their infancy. With further development, light-ion-beam lithography may serve as a useful complement to SEBL for nanofabrication in a wide variety of contexts. by Donald Winston. Ph.D. 2012-07-02T15:47:56Z 2012-07-02T15:47:56Z 2012 2012 Thesis http://hdl.handle.net/1721.1/71495 795584096 eng M.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission. http://dspace.mit.edu/handle/1721.1/7582 212 p. application/pdf Massachusetts Institute of Technology |
| spellingShingle | Electrical Engineering and Computer Science. Winston, Donald, Ph. D. Massachusetts Institute of Technology Sub-10-nm lithography with light-ion beams |
| title | Sub-10-nm lithography with light-ion beams |
| title_full | Sub-10-nm lithography with light-ion beams |
| title_fullStr | Sub-10-nm lithography with light-ion beams |
| title_full_unstemmed | Sub-10-nm lithography with light-ion beams |
| title_short | Sub-10-nm lithography with light-ion beams |
| title_sort | sub 10 nm lithography with light ion beams |
| topic | Electrical Engineering and Computer Science. |
| url | http://hdl.handle.net/1721.1/71495 |
| work_keys_str_mv | AT winstondonaldphdmassachusettsinstituteoftechnology sub10nmlithographywithlightionbeams |