Seismic base isolation : a five-story building example

Seismic base isolation : a five-story building example

Thesis (M.Eng.)--Massachusetts Institute of Technology, Dept. of Civil and Environmental Engineering, 1999.

Bibliographic Details
Main Author:	Nelson, Erik Anders, 1974-
Other Authors:	Jerome J. Connor.
Format:	Thesis
Language:	eng
Published:	Massachusetts Institute of Technology 2013
Subjects:	Civil and Environmental Engineering.
Online Access:	http://hdl.handle.net/1721.1/80154

Similar Items

Friction-based control system for seismic energy dissipation with isolated stories
by: Iliadis, Charalampos
Published: (2011)

Seismic isolation of bridges
by: Ballantyne, Brant Francis, 1974-
Published: (2013)

Study on corollary of seismic base isolation system on buildings with soft story
by: Islam, A.B.M.S., et al.
Published: (2011)

The installation of a seismic isolation system for building retrofit
by: Kelly, John P. (John Peter), 1977-
Published: (2014)

Seismic ductility of base isolated structures
by: Occhiuzzi, Antonio
Published: (2006)

Application of seismic isolation as a performance-based earthquake-resistant design method
by: Komodromos, Petros I. (Petros Ioannis)
Published: (2007)

Seismic retrofitting of deficient Canadian buildings
by: Gemme, Marie-Claude
Published: (2010)

The retrofitting of existing buildings for seismic criteria
by: Besing, Christa, 1978-
Published: (2006)

An investigation of the principles and practices of seismic isolation in bridge structures
by: Lapointe, Evan M. (Evan McNeil), 1981-
Published: (2005)

Design of base isolation system for buildings
by: Wu, Tai-Chieh, 1976-
Published: (2014)

Seismic base isolation for buildings in regions of low to moderate seismicity: practical alternative design
by: Islam, A.B.M.S., et al.
Published: (2010)

Economics of damage controlled seismic design
by: Celikbas, Ayse, 1974-
Published: (2013)

Seismic retrofit of precast panel buildings in Eastern Europe
by: Tzonev, Tzonu
Published: (2013)

Applicability of high strength concrete for buildings in active seismic regions
by: Murray, Nicholas S. (Nicholas Stephen), 1977-
Published: (2014)

Study on corollary of seismic base isolation system on buildings with soft storey
by: Saiful Islam, A.B.M., et al.
Published: (2011)

Seismic assessment of unreinforced masonry buildings in Boston's Back Bay neighborhood
by: Spencer, Emily D. (Emily Deen)
Published: (2015)

Seismic response of segmental buildings with bilinear isolation systems
by: Zhu, Zhuo Fei.
Published: (2010)

Effect of seismic loading on steel moment resisting frames
by: Li, Alex C. (Alex Chung-Hsing), 1974-
Published: (2009)

Evaluation of structural systems for mass timber buildings in low to moderate seismic regions
by: Gleason, Timothy M.(Timothy Michael)
Published: (2019)

Case study of a 39-story building : model verification and performance comparison with a semi-active device
by: Pereira-Mosqueira, Fernando
Published: (2011)

Seismic Response Analysis of Fully Base-Isolated Adjacent Buildings with Segregated Foundations
by: Ghaedi, Khaled, et al.
Published: (2018)

Seismic response of non-linear base-isolated shear buildings and their secondary systems
by: Cui, Wei.
Published: (2009)

The development of a selection criteria model for the type of seismic retrofitting scheme applicable to Philippine buildings
by: Angeles, Kathryn Patricia V. (Kathryn Patricia Velayo)
Published: (2008)

Applicability of linear analysis in probabilistic estimation of seismic building damage to reinforced-concrete structures
by: James, Timothy P. (Timothy Philip)
Published: (2012)

A performance based approach for seismic design with hysteretic dampers
by: Keten, Sinan
Published: (2006)

A comparative study : the dynamic behavior of tall buildings with diagrid and hexagrid structural systems subjected to seismic loads
by: Chen, Xianghui, M. Eng. Massachusetts Institute of Technology
Published: (2018)

Simplified design guidelines for seismic base isolation in multi-storey buildings for Bangladesh National Building Code (BNBC)
by: Islam, A.B.M.S., et al.
Published: (2011)

Seismic isolation in buildings to be a practical reality: behavior of structure and installation technique
by: Islam, A., et al.
Published: (2011)

Motion based seismic design and loss estimation of diagrid structures
by: Liptack, Robert J. (Robert Jeffrey)
Published: (2013)

Hybrid user interfaces : design guidelines and implementation examples
by: Ahn, Sehyun
Published: (2006)

Nonlinear seismic analysis of base-isolated structures
by: Yang, Guichang
Published: (2009)

A performance-based approach to retrofitting unreinforced masonry structures for seismic loads
by: Bouchard, Keith M. (Keith Michael)
Published: (2007)

A computer-based optimization method for plastic design of braced multi-story steel frames.
by: Emkin, Leroy Zachary
Published: (2011)

Evaluation of strategies for seismic design
by: Tsertikidou, Despoina
Published: (2012)

High-performance braces for seismic design
by: Lim, Tim S
Published: (2013)

Seismic performance assessment for structural optimization
by: Ghisbain, Pierre
Published: (2013)

Improving estimates of structural seismic motion
by: Hadjiharitou, Dimitris
Published: (2013)

Design methodologies for the seismic retrofitting of bridges
by: Otenti, Alexander A. (Alexander Alfred), 1981-
Published: (2005)

Aftershocks in engineering seismic risk analysis.
by: Merz, Hans Arnold
Published: (2019)

Dynamic simulation tool for seismic analysis
by: Wang, Chun-Yi, 1971-
Published: (2009)