Analysis and control of a cellular converter system with stochastic ripple cancellation and minimal magnetics
A parallel converter architecture based on the resonant pole inverter (RPI) topology is presented. It is shown that this architecture minimizes the output magnetics required for current sharing. A new current control scheme is introduced which reduces peak currents, losses, and output voltage ripple...
| Main Authors: | , |
|---|---|
| Other Authors: | |
| Format: | Article |
| Language: | en_US |
| Published: |
Institute of Electrical and Electronics Engineers (IEEE)
2014
|
| Online Access: | http://hdl.handle.net/1721.1/86915 https://orcid.org/0000-0002-0746-6191 https://orcid.org/0000-0002-3443-5702 |
| Summary: | A parallel converter architecture based on the resonant pole inverter (RPI) topology is presented. It is shown that this architecture minimizes the output magnetics required for current sharing. A new current control scheme is introduced which reduces peak currents, losses, and output voltage ripple for many operating conditions. This new control method is applicable to both the single RPI and the parallel architecture. Additionally, the paper analytically quantifies the degree of passive ripple cancellation between cells of a parallel architecture. It is shown that the RMS ripple current of an N cell paralleled converter system is a factor of 1√(N) lower than for an equivalent single converter. These results are verified using a piecewise-linear model. We conclude that the parallel architecture overcomes some of the major disadvantages of the conventional RPI. |
|---|