Delivering a low-cost, reliable drip irrigation filtration system for micro-irrigation in developing countries
The cylindrical filters presently used in drip irrigation systems frequently clog, increasing pressure loss and lowering the flow rate through the filters. This work investigates alternative filtration strategies that increase the reliability of, and are compatible with, existing systems. To test...
| Main Authors: | , , , , |
|---|---|
| Other Authors: | |
| Format: | Article |
| Language: | en_US |
| Published: |
ASME International
2015
|
| Online Access: | http://hdl.handle.net/1721.1/99523 https://orcid.org/0000-0002-3989-8968 https://orcid.org/0000-0002-4151-0889 https://orcid.org/0000-0002-7434-2447 |
| Summary: | The cylindrical filters presently used in drip irrigation systems frequently clog, increasing pressure loss and lowering the flow rate through the filters. This work investigates alternative filtration strategies that increase the reliability of, and are compatible with, existing systems. To test different filtration strategies, a drip irrigation test setup was built to measure the pressure loss across different filters as particles accumulated. These experiments found that pleated cartridge filters, with high effective surface area, incurred the lowest pressure losses. More significantly, it was observed during these tests that the filtered out particles settled to the bottom of the filter housing when flow through the filter ceased. This inspired the redesign of the filter housing such that the housing extended far below the filter, providing a catch basin away from the filter for the particles to settle. Fixing the filter independently of the bottom casing significantly improves the overall performance of the filtration system and can be inexpensively manufactured via blow molding. This paper experimentally demonstrates that the cartridge filter inside the redesigned housing can filter out over 2 kg of sand while maintaining less than a .03 bar pressure drop across the filter at a flow rate of 25 l/s. |
|---|