Fabrication and wear property of NiCo coated ZrO₂–Al₂O₃ ceramic particles reinforced high manganese steel-based composites
In this work, the nickel-cobalt layer was used as a medium to improve the interfacial bonding of ZrO2–Al2O3 particles (ZTAP) reinforced high manganese steel-based composites. The nickel-cobalt layers on the surface of ZTAP ceramics are prepared by electroless deposition in the sulfate solutions. The...
| Main Authors: | , , , , , , , , , , |
|---|---|
| Other Authors: | |
| Format: | Journal Article |
| Language: | English |
| Published: |
2022
|
| Subjects: | |
| Online Access: | https://hdl.handle.net/10356/161815 |
| _version_ | 1811696546403581952 |
|---|---|
| author | Li, Cong Goei, Ronn Li, Yefei Shi, Jing Li, Bo Liu, Fei Li, Yuehui Gao, Yimin Li, Shuzhou Zhao, Siyong Tok, Alfred Iing Yoong |
| author2 | School of Materials Science and Engineering |
| author_facet | School of Materials Science and Engineering Li, Cong Goei, Ronn Li, Yefei Shi, Jing Li, Bo Liu, Fei Li, Yuehui Gao, Yimin Li, Shuzhou Zhao, Siyong Tok, Alfred Iing Yoong |
| author_sort | Li, Cong |
| collection | NTU |
| description | In this work, the nickel-cobalt layer was used as a medium to improve the interfacial bonding of ZrO2–Al2O3 particles (ZTAP) reinforced high manganese steel-based composites. The nickel-cobalt layers on the surface of ZTAP ceramics are prepared by electroless deposition in the sulfate solutions. The formation mechanism, morphology evolution and elemental composition of the NiCo coating were investigated by varying the plating temperature, plating time and sulfate concentration. The NiCo grain size increases, and the coating thickness increases and then decreases with CoSiO4 concentration. A dense and uniform nickel-cobalt coating could be obtained after plating with 25 g/L CoSiO4 at 80 °C for 10 h. NiCo coated ZTAP ceramics reinforced high manganese steel matrix composites were fabricated using non-pressure casting infiltration. The results showed that NiCo improves the bonding property of composites causing a tighter and cleaner interface compared with severe defects of cracks, delaminations and holes on the interface of composites without NiCo coating. The effects of NiCo coating on tribological properties of the composites were clarified by the three-body abrasive wear. The superior interfacial bonding of composites assisted with NiCo coating exhibited excellent abrasive wear resistance, which increases by 230%. |
| first_indexed | 2024-10-01T07:41:05Z |
| format | Journal Article |
| id | ntu-10356/161815 |
| institution | Nanyang Technological University |
| language | English |
| last_indexed | 2024-10-01T07:41:05Z |
| publishDate | 2022 |
| record_format | dspace |
| spelling | ntu-10356/1618152022-09-20T08:45:59Z Fabrication and wear property of NiCo coated ZrO₂–Al₂O₃ ceramic particles reinforced high manganese steel-based composites Li, Cong Goei, Ronn Li, Yefei Shi, Jing Li, Bo Liu, Fei Li, Yuehui Gao, Yimin Li, Shuzhou Zhao, Siyong Tok, Alfred Iing Yoong School of Materials Science and Engineering Engineering::Materials ZTA Ceramic Wettability In this work, the nickel-cobalt layer was used as a medium to improve the interfacial bonding of ZrO2–Al2O3 particles (ZTAP) reinforced high manganese steel-based composites. The nickel-cobalt layers on the surface of ZTAP ceramics are prepared by electroless deposition in the sulfate solutions. The formation mechanism, morphology evolution and elemental composition of the NiCo coating were investigated by varying the plating temperature, plating time and sulfate concentration. The NiCo grain size increases, and the coating thickness increases and then decreases with CoSiO4 concentration. A dense and uniform nickel-cobalt coating could be obtained after plating with 25 g/L CoSiO4 at 80 °C for 10 h. NiCo coated ZTAP ceramics reinforced high manganese steel matrix composites were fabricated using non-pressure casting infiltration. The results showed that NiCo improves the bonding property of composites causing a tighter and cleaner interface compared with severe defects of cracks, delaminations and holes on the interface of composites without NiCo coating. The effects of NiCo coating on tribological properties of the composites were clarified by the three-body abrasive wear. The superior interfacial bonding of composites assisted with NiCo coating exhibited excellent abrasive wear resistance, which increases by 230%. This work was funded by the National Natural Science Foundation of China (No. 51805408, 52175184), the China Postdoctoral Science Foundation (No. 2021M702558), the Guangxi Innovation Driven Development Project (GUIKEAA18242001), the Key-Area Research and Development Program of Guangdong Province (2019B010942001), the Fundamental Research Funds for the Central Universities of China (xzy012019001, xtr0118008). Cong Li thanks the support of the China Scholarship Council. 2022-09-20T08:45:59Z 2022-09-20T08:45:59Z 2022 Journal Article Li, C., Goei, R., Li, Y., Shi, J., Li, B., Liu, F., Li, Y., Gao, Y., Li, S., Zhao, S. & Tok, A. I. Y. (2022). Fabrication and wear property of NiCo coated ZrO₂–Al₂O₃ ceramic particles reinforced high manganese steel-based composites. Wear, 492-493, 204235-. https://dx.doi.org/10.1016/j.wear.2022.204235 0043-1648 https://hdl.handle.net/10356/161815 10.1016/j.wear.2022.204235 2-s2.0-85122232132 492-493 204235 en Wear © 2022 Elsevier B.V. All rights reserved. |
| spellingShingle | Engineering::Materials ZTA Ceramic Wettability Li, Cong Goei, Ronn Li, Yefei Shi, Jing Li, Bo Liu, Fei Li, Yuehui Gao, Yimin Li, Shuzhou Zhao, Siyong Tok, Alfred Iing Yoong Fabrication and wear property of NiCo coated ZrO₂–Al₂O₃ ceramic particles reinforced high manganese steel-based composites |
| title | Fabrication and wear property of NiCo coated ZrO₂–Al₂O₃ ceramic particles reinforced high manganese steel-based composites |
| title_full | Fabrication and wear property of NiCo coated ZrO₂–Al₂O₃ ceramic particles reinforced high manganese steel-based composites |
| title_fullStr | Fabrication and wear property of NiCo coated ZrO₂–Al₂O₃ ceramic particles reinforced high manganese steel-based composites |
| title_full_unstemmed | Fabrication and wear property of NiCo coated ZrO₂–Al₂O₃ ceramic particles reinforced high manganese steel-based composites |
| title_short | Fabrication and wear property of NiCo coated ZrO₂–Al₂O₃ ceramic particles reinforced high manganese steel-based composites |
| title_sort | fabrication and wear property of nico coated zro₂ al₂o₃ ceramic particles reinforced high manganese steel based composites |
| topic | Engineering::Materials ZTA Ceramic Wettability |
| url | https://hdl.handle.net/10356/161815 |
| work_keys_str_mv | AT licong fabricationandwearpropertyofnicocoatedzro2al2o3ceramicparticlesreinforcedhighmanganesesteelbasedcomposites AT goeironn fabricationandwearpropertyofnicocoatedzro2al2o3ceramicparticlesreinforcedhighmanganesesteelbasedcomposites AT liyefei fabricationandwearpropertyofnicocoatedzro2al2o3ceramicparticlesreinforcedhighmanganesesteelbasedcomposites AT shijing fabricationandwearpropertyofnicocoatedzro2al2o3ceramicparticlesreinforcedhighmanganesesteelbasedcomposites AT libo fabricationandwearpropertyofnicocoatedzro2al2o3ceramicparticlesreinforcedhighmanganesesteelbasedcomposites AT liufei fabricationandwearpropertyofnicocoatedzro2al2o3ceramicparticlesreinforcedhighmanganesesteelbasedcomposites AT liyuehui fabricationandwearpropertyofnicocoatedzro2al2o3ceramicparticlesreinforcedhighmanganesesteelbasedcomposites AT gaoyimin fabricationandwearpropertyofnicocoatedzro2al2o3ceramicparticlesreinforcedhighmanganesesteelbasedcomposites AT lishuzhou fabricationandwearpropertyofnicocoatedzro2al2o3ceramicparticlesreinforcedhighmanganesesteelbasedcomposites AT zhaosiyong fabricationandwearpropertyofnicocoatedzro2al2o3ceramicparticlesreinforcedhighmanganesesteelbasedcomposites AT tokalfrediingyoong fabricationandwearpropertyofnicocoatedzro2al2o3ceramicparticlesreinforcedhighmanganesesteelbasedcomposites |