Investigation Of The Mechanical Properties Of 3D Printed Compliant Mechanisms
The compliant parallel mechanisms (CPM) used in precision positioners are commonly fabricated in parts by traditional manufacturing methods such as milling and wire-cut electrical discharge manufacturing (EDM). The performance of these positioners can therefore be significantly affected by assemblin...
| Main Authors: | , , |
|---|---|
| Other Authors: | |
| Format: | Conference Paper |
| Language: | English |
| Published: |
2016
|
| Subjects: | |
| Online Access: | https://hdl.handle.net/10356/84630 http://hdl.handle.net/10220/41844 |
| Summary: | The compliant parallel mechanisms (CPM) used in precision positioners are commonly fabricated in parts by traditional manufacturing methods such as milling and wire-cut electrical discharge manufacturing (EDM). The performance of these positioners can therefore be significantly affected by assembling errors. This paper presents the investigation of the potential of 3D printing technology in fabricating precise-compliant devices through evaluating the performance of a 3D printed CPM. The design of a novel three degrees of freedom (DOF) CPM is first presented. The proposed CPM is monolithically fabricated by selective laser melting (SLM) technology, eliminating errors in the assembly process. Several experiments are carried out to evaluate the mechanical properties of the 3D printed CPM in terms of stiffness characteristics and dynamic response. The experimental performance of the 3D printed CPM is found to be within 12.5% of the results from simulation. The advantages as well as limitations of 3D printing technology in fabricating compliant devices are also discussed. |
|---|