Use of carbon nanotubes for passive radio-frequency devices
As devices get more connected and communication increase in density, new challenges arise. The usual frequency bands used are getting crowded by the number of applications, and the relatively low working frequencies limit the available bandwidth and speed. Applications are now implemented in the GH...
| Main Author: | |
|---|---|
| Other Authors: | |
| Format: | Thesis |
| Language: | English |
| Published: |
2018
|
| Subjects: | |
| Online Access: | https://hdl.handle.net/10356/89434 http://hdl.handle.net/10220/46256 |
| Summary: | As devices get more connected and communication increase in density, new challenges arise. The usual frequency bands used are getting crowded by the number of applications, and the relatively low working frequencies limit the available bandwidth
and speed. Applications are now implemented in the GHz, but next generation devices
shift towards higher frequencies into the millimetre band (30-300 GHz), seeking larger
bandwidths, smaller devices and antenna size and improvement in spatial resolution.
(High bitrate communications, Backhaul, radars, imaging, bio-sensors…)
These emerging devices have a need for passive framework for feeding and
supporting while keeping the efficiency high, the dimensions short and the bandwidth
large. The problematic of this thesis is to devise an innovative way to answer those needs.
Some solutions have of course emerged in the literature, and the plan here is to fork from those pre-existing results. Most solutions revolve around using vertically aligned micro/nano-structures to guide a wave or to reduce wave velocity. The idea is
to introduce Vertically-Aligned Carbon Nanotube Forests (VA-CNT) into those designs,
for they display inherently conductive anisotropy while improving from the previous
solutions in terms of density and equivalent conductivity and ease of fabrication.
As passive devices cover a broad range of devices, the focus will be on some
of the simplest devices, to pave the way for this technology. In a first step a simple
slow-wave micro-strip transmission line using VA-CNTs is considered, which
showcases the possibility to reduce significantly wave velocity propagation in the line,
thus reducing the dimensions without the use of high-k dielectrics. Work on the topic
demonstrate significant size reduction of devices at a given frequency.
In a second step, another type of transmission line is considered: Substrate
integrated waveguides (SIW) and slow-wave SIW (SW-SIW). Waveguides large
viii
dimensions’ stop being a collateral at higher frequencies -with dimensions going bellow
the millimetre- while exhibiting relatively better parameters per unit length than other
propagation solutions. The feasibility of a SIW using VA-CNT forests is demonstrated
through theoretical simulation and fabrication. A solution including a similar setup to
the micro-strip line is investigated to assert the effects and possibility of slow-wave in
waveguides using only bottom-up processes.
Finally, as an extension of the problematic, some diverse and more complex
topologies are considered such as filters, antenna arrays feedings or interposers. |
|---|