STUDI EKSPERIMENTAL PENGARUH PERUBAHAN SUHU TERHADAP PARAMETER ALIRAN STRATIFIED PADA PIPA HORIZONTAL DENGAN MENGGUNAKAN GELOMBANG ULTRASONIK

rate The Fluid flow in a system need to be identified because it influences the performance of the system. Measuring tool is needed for flow monitoring. A number of systems in industy requires measurement system using non-invasive method, with low cost and flexibility of installation. The ultrasonic...

Full description

Bibliographic Details
Main Authors: , Mukhlis A.Hamarung, , M.Agung Bramantya, S.T., M.T., M.Eng. Ph.D.
Format: Thesis
Published: [Yogyakarta] : Universitas Gadjah Mada 2013
Subjects:
ETD
_version_ 1826046398090444800
author , Mukhlis A.Hamarung
, M.Agung Bramantya, S.T., M.T., M.Eng. Ph.D.
author_facet , Mukhlis A.Hamarung
, M.Agung Bramantya, S.T., M.T., M.Eng. Ph.D.
author_sort , Mukhlis A.Hamarung
collection UGM
description rate The Fluid flow in a system need to be identified because it influences the performance of the system. Measuring tool is needed for flow monitoring. A number of systems in industy requires measurement system using non-invasive method, with low cost and flexibility of installation. The ultrasonic flow meter is used to monitor the flow without any changes in the cross sections. Ultrasonic flow meter is used to measure two phases flow rate due to gas or liquid particles flow. The ultrasonic flow meter is easy to install, movable, and do not cause the friction loss. In this study, water and air has been used as working fluids. A plate is placed in the entrance region in order to prevent water mixed with air so that stratified flow is easy to obtain. Pipe used in this investigation is the acrylic pipe with 18 mm diameter and 5 mm thickness which is transparent in the benefit of observing the flow behaviour, a pair of transducer consists of transmitter and receiver with a frequency of 40 kHz. Function generator is used to generate ultrasonic waves frequency connecting to the transmitter as a transmitter signal. Signal transmitted then has been received by a receiver connecting with a digitali oscilloscope. This study aims to know the effect of temperature changes on void fraction (α) based on visualization data, amplitude value resulting from ultrasonic spectrum frequency and transit time of ultrasonic waves through its medium. Superficial velocity of water (JL) used is 0,03 m/s - 0,07 1 m/s, superficial velocity of air (JG) is starting from 2,2 m/s until 3,81 m/s, with the inlet temperature 30 o C, 50 o C, and 70 o C, respectively. been It have found that in the same superficial velocity of water (JL), the increasing of the average superficial velocity of air (JG) cause the void fraction (Χ) are increasing but in the same superficial velocity of air (JG), the increasing of the average superficial velocity of water (JL) cause the void fraction (Χ) are decreasing. In the same superficial velocity of air (JG), the increasing of temperature causes the increasing of the average void fraction (Χ). The increasing of water flow rate (QL) and temperature cause the average amplitude decreased and the increasing of air flow rate (QG) causes the steady average amplitude. With the increasing of temperature showed that the transit time becomes reduced.
first_indexed 2024-03-13T22:52:29Z
format Thesis
id oai:generic.eprints.org:120322
institution Universiti Gadjah Mada
last_indexed 2024-03-13T22:52:29Z
publishDate 2013
publisher [Yogyakarta] : Universitas Gadjah Mada
record_format dspace
spelling oai:generic.eprints.org:1203222016-03-04T08:40:53Z https://repository.ugm.ac.id/120322/ STUDI EKSPERIMENTAL PENGARUH PERUBAHAN SUHU TERHADAP PARAMETER ALIRAN STRATIFIED PADA PIPA HORIZONTAL DENGAN MENGGUNAKAN GELOMBANG ULTRASONIK , Mukhlis A.Hamarung , M.Agung Bramantya, S.T., M.T., M.Eng. Ph.D. ETD rate The Fluid flow in a system need to be identified because it influences the performance of the system. Measuring tool is needed for flow monitoring. A number of systems in industy requires measurement system using non-invasive method, with low cost and flexibility of installation. The ultrasonic flow meter is used to monitor the flow without any changes in the cross sections. Ultrasonic flow meter is used to measure two phases flow rate due to gas or liquid particles flow. The ultrasonic flow meter is easy to install, movable, and do not cause the friction loss. In this study, water and air has been used as working fluids. A plate is placed in the entrance region in order to prevent water mixed with air so that stratified flow is easy to obtain. Pipe used in this investigation is the acrylic pipe with 18 mm diameter and 5 mm thickness which is transparent in the benefit of observing the flow behaviour, a pair of transducer consists of transmitter and receiver with a frequency of 40 kHz. Function generator is used to generate ultrasonic waves frequency connecting to the transmitter as a transmitter signal. Signal transmitted then has been received by a receiver connecting with a digitali oscilloscope. This study aims to know the effect of temperature changes on void fraction (α) based on visualization data, amplitude value resulting from ultrasonic spectrum frequency and transit time of ultrasonic waves through its medium. Superficial velocity of water (JL) used is 0,03 m/s - 0,07 1 m/s, superficial velocity of air (JG) is starting from 2,2 m/s until 3,81 m/s, with the inlet temperature 30 o C, 50 o C, and 70 o C, respectively. been It have found that in the same superficial velocity of water (JL), the increasing of the average superficial velocity of air (JG) cause the void fraction (Χ) are increasing but in the same superficial velocity of air (JG), the increasing of the average superficial velocity of water (JL) cause the void fraction (Χ) are decreasing. In the same superficial velocity of air (JG), the increasing of temperature causes the increasing of the average void fraction (Χ). The increasing of water flow rate (QL) and temperature cause the average amplitude decreased and the increasing of air flow rate (QG) causes the steady average amplitude. With the increasing of temperature showed that the transit time becomes reduced. [Yogyakarta] : Universitas Gadjah Mada 2013 Thesis NonPeerReviewed , Mukhlis A.Hamarung and , M.Agung Bramantya, S.T., M.T., M.Eng. Ph.D. (2013) STUDI EKSPERIMENTAL PENGARUH PERUBAHAN SUHU TERHADAP PARAMETER ALIRAN STRATIFIED PADA PIPA HORIZONTAL DENGAN MENGGUNAKAN GELOMBANG ULTRASONIK. UNSPECIFIED thesis, UNSPECIFIED. http://etd.ugm.ac.id/index.php?mod=penelitian_detail&sub=PenelitianDetail&act=view&typ=html&buku_id=60344
spellingShingle ETD
, Mukhlis A.Hamarung
, M.Agung Bramantya, S.T., M.T., M.Eng. Ph.D.
STUDI EKSPERIMENTAL PENGARUH PERUBAHAN SUHU TERHADAP PARAMETER ALIRAN STRATIFIED PADA PIPA HORIZONTAL DENGAN MENGGUNAKAN GELOMBANG ULTRASONIK
title STUDI EKSPERIMENTAL PENGARUH PERUBAHAN SUHU TERHADAP PARAMETER ALIRAN STRATIFIED PADA PIPA HORIZONTAL DENGAN MENGGUNAKAN GELOMBANG ULTRASONIK
title_full STUDI EKSPERIMENTAL PENGARUH PERUBAHAN SUHU TERHADAP PARAMETER ALIRAN STRATIFIED PADA PIPA HORIZONTAL DENGAN MENGGUNAKAN GELOMBANG ULTRASONIK
title_fullStr STUDI EKSPERIMENTAL PENGARUH PERUBAHAN SUHU TERHADAP PARAMETER ALIRAN STRATIFIED PADA PIPA HORIZONTAL DENGAN MENGGUNAKAN GELOMBANG ULTRASONIK
title_full_unstemmed STUDI EKSPERIMENTAL PENGARUH PERUBAHAN SUHU TERHADAP PARAMETER ALIRAN STRATIFIED PADA PIPA HORIZONTAL DENGAN MENGGUNAKAN GELOMBANG ULTRASONIK
title_short STUDI EKSPERIMENTAL PENGARUH PERUBAHAN SUHU TERHADAP PARAMETER ALIRAN STRATIFIED PADA PIPA HORIZONTAL DENGAN MENGGUNAKAN GELOMBANG ULTRASONIK
title_sort studi eksperimental pengaruh perubahan suhu terhadap parameter aliran stratified pada pipa horizontal dengan menggunakan gelombang ultrasonik
topic ETD
work_keys_str_mv AT mukhlisahamarung studieksperimentalpengaruhperubahansuhuterhadapparameteraliranstratifiedpadapipahorizontaldenganmenggunakangelombangultrasonik
AT magungbramantyastmtmengphd studieksperimentalpengaruhperubahansuhuterhadapparameteraliranstratifiedpadapipahorizontaldenganmenggunakangelombangultrasonik