IMPROVEMENT AUTOMATIC DETECTOR BOCHI CONNECTING ROD PADA MESIN PRESS BUSHING KOKUYO DI PT. HINO MOTORS MANUFACTURING INDONESIA
Press bushing machine is a machine used for machining the connecting rod. Pressing process of bushing connecting rod into the hole by press bushing machine. Bushings is mounted upside down on the connecting rod because placement of the workpiece on the jig machine is mounted upside down, so the resu...
| Main Authors: | , |
|---|---|
| Format: | Thesis |
| Published: |
[Yogyakarta] : Universitas Gadjah Mada
2014
|
| Subjects: |
| Summary: | Press bushing machine is a machine used for machining the connecting rod.
Pressing process of bushing connecting rod into the hole by press bushing
machine. Bushings is mounted upside down on the connecting rod because
placement of the workpiece on the jig machine is mounted upside down, so the
result of the work piece press bushing become reject / not good.
Solutions are needed to prevent the workpiece reject / not good reoccur is
made application automatic detector bochi connecting rod. Automatic detector
bochi connecting rod is applicaton designed to detect the workpiece when the
workpiece upside down on the jig. Automatic detector bochi connecting rod using
a inductive proximity sensor mounted on a jig machine and connect to the PLC.
The result after the automatic detector bochi connecting rod is used,
machine can not be operated if the workpiece is attached in an inverted position.
So, in bushing attachment process, rejection not occur again. |
|---|