PERANCANGAN GELAGAR BETON BERTULANG BALOK-T JEMBATAN NON-STANDAR LEBAR 6 METER DENGAN PERATURAN RSNI T-02-2005
In this modern era, transportation is one of the basic necessities of the society. Lack of transportation facility could be the cause of poverty. In rural areas, those lacks of necessities is still often found, such as broken roads, bridges, and very simple pedestrian bridges. Thus, infrastructures...
| Main Authors: | , |
|---|---|
| Format: | Thesis |
| Published: |
[Yogyakarta] : Universitas Gadjah Mada
2014
|
| Subjects: |
| _version_ | 1797035238843482112 |
|---|---|
| author | , YOSEPHIN NUKE C M , Dr. �Ing. Ir. Djoko Sulistyo |
| author_facet | , YOSEPHIN NUKE C M , Dr. �Ing. Ir. Djoko Sulistyo |
| author_sort | , YOSEPHIN NUKE C M |
| collection | UGM |
| description | In this modern era, transportation is one of the basic necessities of the society.
Lack of transportation facility could be the cause of poverty. In rural areas, those
lacks of necessities is still often found, such as broken roads, bridges, and very simple
pedestrian bridges. Thus, infrastructures are needed for connecting between rural and
urban areas, like bridges. They don�t need to be wide, but strong enough for big
trucks like agriculture trucks or logistic trucks to cross over. But, the existed
Reinforced T-Beam Concrete Bridge only provides the profile design for 9 meters
width Bridge, which is inefficient for rural areas. So the non-standard bridge design
could become a solution to overcome these transportation necessities. This nonstandard
bridge�s design is limited for single lane bridge with the total width of 6 m
including sidewalk.
The purpose of this T-beam girder reinforced concrete bridge design is to
design and analyze the bridge profile dimension and reinforcement. The design starts
by determining bridge profiles which is typical with profiles in Standar Jembatan
Gelagar Beton Bertulang Balok T Tahun 1997, then analyze bridge loads, design
reinforcements, then analyzing and comparing with bridge strength.
The result shows that the profile dimensions and reinforcement needs for
standard bridge is appropriate with the non-standard bridge design with changing the
reinforcement quality form 295 MPa to 390 MPa. But the shear reinforcements which
the standard use is 10 mm reinforcement with yield strength 240 MPa need to be
changed into 12 mm with yield strength 320 MPa. This quality changing is made to
suit the reinforcement quality that available on market nowadays. Meanwhile, the
standard�s floor plate reinforcement is 12 mm, but the design�s result shows that it
needed to be larger. The analysis shows that the non-standard bridge girder could
support the bridge loads. |
| first_indexed | 2024-03-13T23:26:08Z |
| format | Thesis |
| id | oai:generic.eprints.org:129740 |
| institution | Universiti Gadjah Mada |
| last_indexed | 2024-03-13T23:26:08Z |
| publishDate | 2014 |
| publisher | [Yogyakarta] : Universitas Gadjah Mada |
| record_format | dspace |
| spelling | oai:generic.eprints.org:1297402016-03-04T08:18:22Z https://repository.ugm.ac.id/129740/ PERANCANGAN GELAGAR BETON BERTULANG BALOK-T JEMBATAN NON-STANDAR LEBAR 6 METER DENGAN PERATURAN RSNI T-02-2005 , YOSEPHIN NUKE C M , Dr. �Ing. Ir. Djoko Sulistyo ETD In this modern era, transportation is one of the basic necessities of the society. Lack of transportation facility could be the cause of poverty. In rural areas, those lacks of necessities is still often found, such as broken roads, bridges, and very simple pedestrian bridges. Thus, infrastructures are needed for connecting between rural and urban areas, like bridges. They don�t need to be wide, but strong enough for big trucks like agriculture trucks or logistic trucks to cross over. But, the existed Reinforced T-Beam Concrete Bridge only provides the profile design for 9 meters width Bridge, which is inefficient for rural areas. So the non-standard bridge design could become a solution to overcome these transportation necessities. This nonstandard bridge�s design is limited for single lane bridge with the total width of 6 m including sidewalk. The purpose of this T-beam girder reinforced concrete bridge design is to design and analyze the bridge profile dimension and reinforcement. The design starts by determining bridge profiles which is typical with profiles in Standar Jembatan Gelagar Beton Bertulang Balok T Tahun 1997, then analyze bridge loads, design reinforcements, then analyzing and comparing with bridge strength. The result shows that the profile dimensions and reinforcement needs for standard bridge is appropriate with the non-standard bridge design with changing the reinforcement quality form 295 MPa to 390 MPa. But the shear reinforcements which the standard use is 10 mm reinforcement with yield strength 240 MPa need to be changed into 12 mm with yield strength 320 MPa. This quality changing is made to suit the reinforcement quality that available on market nowadays. Meanwhile, the standard�s floor plate reinforcement is 12 mm, but the design�s result shows that it needed to be larger. The analysis shows that the non-standard bridge girder could support the bridge loads. [Yogyakarta] : Universitas Gadjah Mada 2014 Thesis NonPeerReviewed , YOSEPHIN NUKE C M and , Dr. �Ing. Ir. Djoko Sulistyo (2014) PERANCANGAN GELAGAR BETON BERTULANG BALOK-T JEMBATAN NON-STANDAR LEBAR 6 METER DENGAN PERATURAN RSNI T-02-2005. UNSPECIFIED thesis, UNSPECIFIED. http://etd.ugm.ac.id/index.php?mod=penelitian_detail&sub=PenelitianDetail&act=view&typ=html&buku_id=70137 |
| spellingShingle | ETD , YOSEPHIN NUKE C M , Dr. �Ing. Ir. Djoko Sulistyo PERANCANGAN GELAGAR BETON BERTULANG BALOK-T JEMBATAN NON-STANDAR LEBAR 6 METER DENGAN PERATURAN RSNI T-02-2005 |
| title | PERANCANGAN GELAGAR BETON BERTULANG BALOK-T
JEMBATAN NON-STANDAR LEBAR 6 METER DENGAN PERATURAN
RSNI T-02-2005 |
| title_full | PERANCANGAN GELAGAR BETON BERTULANG BALOK-T
JEMBATAN NON-STANDAR LEBAR 6 METER DENGAN PERATURAN
RSNI T-02-2005 |
| title_fullStr | PERANCANGAN GELAGAR BETON BERTULANG BALOK-T
JEMBATAN NON-STANDAR LEBAR 6 METER DENGAN PERATURAN
RSNI T-02-2005 |
| title_full_unstemmed | PERANCANGAN GELAGAR BETON BERTULANG BALOK-T
JEMBATAN NON-STANDAR LEBAR 6 METER DENGAN PERATURAN
RSNI T-02-2005 |
| title_short | PERANCANGAN GELAGAR BETON BERTULANG BALOK-T
JEMBATAN NON-STANDAR LEBAR 6 METER DENGAN PERATURAN
RSNI T-02-2005 |
| title_sort | perancangan gelagar beton bertulang balok t jembatan non standar lebar 6 meter dengan peraturan rsni t 02 2005 |
| topic | ETD |
| work_keys_str_mv | AT yosephinnukecm perancangangelagarbetonbertulangbaloktjembatannonstandarlebar6meterdenganperaturanrsnit022005 AT draingirdjokosulistyo perancangangelagarbetonbertulangbaloktjembatannonstandarlebar6meterdenganperaturanrsnit022005 |