| Summary: | Excavator cycle time unit is one of the factors in determining the target
production, because when the cycle time which did not fit the standard then the
production target would not be reached. Condition of the system that do not fit the
standard will affect the live time of a component.
Specify a section to do measurement and standardization must understand the
system first, working principles, manner of measurement, working standards and
Setup, of all things should refer to manual book.
Hydraulic oil pressure standard in the system is divided into primary
pressure on the pilot and the pressure on the main circuit, each of which is limited to
a maximum of 45 kgf/cm2 and 300 kgf/cm2. The measurement and standardization
should be done on a regular basis so that the importance of preventive action to
avoid a long downtime.
|
|---|