Kekuatan Tarik Sambungan Flat dan Tirus Dengan Metoda Friction Welding Pada Baja Karbon Rendah ST 37
In traditional welding, feeder electrodes usually require dirty welds, slags, and also the deformation that occurs is quite large, due to residual stress. With FW will minimize the defects that occur and the strength of the mechanical properties better. For this reason, the researchers tried to do t...
Main Authors: | Setiawan, Widia, Santosa, Nugroho |
---|---|
Format: | Conference or Workshop Item |
Language: | English |
Published: |
2014
|
Subjects: | |
Online Access: | https://repository.ugm.ac.id/274677/1/proseding10001.pdf |
Similar Items
-
KEKUATAN TARIK LAS DENGAN VARIASI LUAS BIDANG GESEK PADA BAJA KARBON RENDAH ST 37 DENGAN METODA FRICTION WELDING
(THE WELDING TENSILE STRENGTH WITH AREA FRICTION VARIATION LOW CARBON STEEL ST 37AT FRICTION WELDING METHOD)
by: Setiawan, Widia, et al.
Published: (2016) -
SAMBUNGAN DISSIMILAR METAL ALUMINIUM 6061 dan PIPA GALVANIS DENGAN METODA FRICTION WELDING
(DISSIMILAR JOINING METAL OF ALUMINUM 6061 AND GALVANIS PIPE WITH FRICTION WELDING METHOD)
by: Setiawan, Widia, et al.
Published: (2018) -
Variasi Perubahan Putaran Pada Pengecoran Aluminium Bentuk Puli Dengan Metode Centrifugal Casting Terhadap Peningkatan Kekuatan Mekanik
by: Santoso, Nugroho, et al.
Published: (2015) -
Analisis Kekuatan Tarik dan Ketangguhan Sambungan Las Busur Rendam Baja Karbon Rendah dengan Variasi Kandungan Mn.
by: Perpustakaan UGM, i-lib
Published: (2006) -
FRICTION STIR WELDING ON CORNER JOINT WITH NEW SURFACE
PREPARATION DESIGN
by: Setiawan, Widia, et al.
Published: (2016)