UTILIZATION OF FLYASH WASTE AS REINFORCEMENT OF ALUMINUM MATRIX COMPOSITE PRODUCED USING POWDER METALLURGY (Pemanfaatan Limbah Abu Terbang sebagai Penguat Aluminium Metal Matrix Composite Dibuat dengan Cara Meta/urgi Ser

Aluminum matrix composite (AMe) has been prepared from aluminum fine powder as a matrix and fly ash waste as reinforcement. In this research the amount of fly ash as much as 2.5,5, 7.5 and 10 wt% was added to the aluminum fine powder. The mixture was compacted using uniaxial with a pressure of 100 M...

Full description

Bibliographic Details
Main Author: Perpustakaan UGM, i-lib
Format: Article
Published: [Yogyakarta] : Universitas Gadjah Mada 2011
Subjects:
_version_ 1826033358504722432
author Perpustakaan UGM, i-lib
author_facet Perpustakaan UGM, i-lib
author_sort Perpustakaan UGM, i-lib
collection UGM
description Aluminum matrix composite (AMe) has been prepared from aluminum fine powder as a matrix and fly ash waste as reinforcement. In this research the amount of fly ash as much as 2.5,5, 7.5 and 10 wt% was added to the aluminum fine powder. The mixture was compacted using uniaxial with a pressure of 100 MPa and it was pressureless sintered in argon atmosphere at various temperature of 500°, 525°, 550°,575° and 600°C. Bending strength of AMC was determined using four point bending, hardness was tested using Vickers method, wear rate was tested using pin on disk method, porosity was tested using Archimedes method and the micro structure was observed using SEM. The result shows that fly ash can be used as reinforcement of AMC. The bending strength and Vickers hardness of AMC increase, wear rate and porosity of AMC decrease with increasing the fly ash content up to 7.5 wt%, while fly ash higher than 7.5 wt% causes a decrease. Porosity, bending strength, wear rate and hardness of AMC are 5.4%, 68.5 MPa, 0.0571 mg/(MPa.m) and 62.6 VHN, respectively. It shows that bending strength, hardness and wear resistance of AMC are higher than pure aluminum.
first_indexed 2024-03-13T19:09:37Z
format Article
id oai:generic.eprints.org:29117
institution Universiti Gadjah Mada
last_indexed 2024-03-13T19:09:37Z
publishDate 2011
publisher [Yogyakarta] : Universitas Gadjah Mada
record_format dspace
spelling oai:generic.eprints.org:291172014-06-18T00:23:47Z https://repository.ugm.ac.id/29117/ UTILIZATION OF FLYASH WASTE AS REINFORCEMENT OF ALUMINUM MATRIX COMPOSITE PRODUCED USING POWDER METALLURGY (Pemanfaatan Limbah Abu Terbang sebagai Penguat Aluminium Metal Matrix Composite Dibuat dengan Cara Meta/urgi Ser Perpustakaan UGM, i-lib Jurnal i-lib UGM Aluminum matrix composite (AMe) has been prepared from aluminum fine powder as a matrix and fly ash waste as reinforcement. In this research the amount of fly ash as much as 2.5,5, 7.5 and 10 wt% was added to the aluminum fine powder. The mixture was compacted using uniaxial with a pressure of 100 MPa and it was pressureless sintered in argon atmosphere at various temperature of 500°, 525°, 550°,575° and 600°C. Bending strength of AMC was determined using four point bending, hardness was tested using Vickers method, wear rate was tested using pin on disk method, porosity was tested using Archimedes method and the micro structure was observed using SEM. The result shows that fly ash can be used as reinforcement of AMC. The bending strength and Vickers hardness of AMC increase, wear rate and porosity of AMC decrease with increasing the fly ash content up to 7.5 wt%, while fly ash higher than 7.5 wt% causes a decrease. Porosity, bending strength, wear rate and hardness of AMC are 5.4%, 68.5 MPa, 0.0571 mg/(MPa.m) and 62.6 VHN, respectively. It shows that bending strength, hardness and wear resistance of AMC are higher than pure aluminum. [Yogyakarta] : Universitas Gadjah Mada 2011 Article NonPeerReviewed Perpustakaan UGM, i-lib (2011) UTILIZATION OF FLYASH WASTE AS REINFORCEMENT OF ALUMINUM MATRIX COMPOSITE PRODUCED USING POWDER METALLURGY (Pemanfaatan Limbah Abu Terbang sebagai Penguat Aluminium Metal Matrix Composite Dibuat dengan Cara Meta/urgi Ser. Jurnal i-lib UGM. http://i-lib.ugm.ac.id/jurnal/download.php?dataId=12180
spellingShingle Jurnal i-lib UGM
Perpustakaan UGM, i-lib
UTILIZATION OF FLYASH WASTE AS REINFORCEMENT OF ALUMINUM MATRIX COMPOSITE PRODUCED USING POWDER METALLURGY (Pemanfaatan Limbah Abu Terbang sebagai Penguat Aluminium Metal Matrix Composite Dibuat dengan Cara Meta/urgi Ser
title UTILIZATION OF FLYASH WASTE AS REINFORCEMENT OF ALUMINUM MATRIX COMPOSITE PRODUCED USING POWDER METALLURGY (Pemanfaatan Limbah Abu Terbang sebagai Penguat Aluminium Metal Matrix Composite Dibuat dengan Cara Meta/urgi Ser
title_full UTILIZATION OF FLYASH WASTE AS REINFORCEMENT OF ALUMINUM MATRIX COMPOSITE PRODUCED USING POWDER METALLURGY (Pemanfaatan Limbah Abu Terbang sebagai Penguat Aluminium Metal Matrix Composite Dibuat dengan Cara Meta/urgi Ser
title_fullStr UTILIZATION OF FLYASH WASTE AS REINFORCEMENT OF ALUMINUM MATRIX COMPOSITE PRODUCED USING POWDER METALLURGY (Pemanfaatan Limbah Abu Terbang sebagai Penguat Aluminium Metal Matrix Composite Dibuat dengan Cara Meta/urgi Ser
title_full_unstemmed UTILIZATION OF FLYASH WASTE AS REINFORCEMENT OF ALUMINUM MATRIX COMPOSITE PRODUCED USING POWDER METALLURGY (Pemanfaatan Limbah Abu Terbang sebagai Penguat Aluminium Metal Matrix Composite Dibuat dengan Cara Meta/urgi Ser
title_short UTILIZATION OF FLYASH WASTE AS REINFORCEMENT OF ALUMINUM MATRIX COMPOSITE PRODUCED USING POWDER METALLURGY (Pemanfaatan Limbah Abu Terbang sebagai Penguat Aluminium Metal Matrix Composite Dibuat dengan Cara Meta/urgi Ser
title_sort utilization of flyash waste as reinforcement of aluminum matrix composite produced using powder metallurgy pemanfaatan limbah abu terbang sebagai penguat aluminium metal matrix composite dibuat dengan cara meta urgi ser
topic Jurnal i-lib UGM
work_keys_str_mv AT perpustakaanugmilib utilizationofflyashwasteasreinforcementofaluminummatrixcompositeproducedusingpowdermetallurgypemanfaatanlimbahabuterbangsebagaipenguataluminiummetalmatrixcompositedibuatdengancarametaurgiser