PENGGUNAAN BETON STYROFOAM DENGAN PERKUATAN WIREMESH UNTUK PANEL DINDING TEBAL 7 CM
The recent technology of building material for walls, is getting toward to the use of walls that have some characters such as light, fast assembled and environmentally friendly. Making lightweight concrete wall from styrofoam waste is an effort to take advantage of styrofoam waste. Styrofoam has a v...
| Main Authors: | , |
|---|---|
| Format: | Thesis |
| Published: |
[Yogyakarta] : Universitas Gadjah Mada
2011
|
| Subjects: |
| _version_ | 1826043784028225536 |
|---|---|
| author | , Andi Prasetiyo Wibowo , Ir. Suprapto Siswosukarto, Ph.D. |
| author_facet | , Andi Prasetiyo Wibowo , Ir. Suprapto Siswosukarto, Ph.D. |
| author_sort | , Andi Prasetiyo Wibowo |
| collection | UGM |
| description | The recent technology of building material for walls, is getting toward to the
use of walls that have some characters such as light, fast assembled and
environmentally friendly. Making lightweight concrete wall from styrofoam waste is
an effort to take advantage of styrofoam waste. Styrofoam has a very light weight unit
that is about 13 to 15 kg/m
3
. The use wiremesh layers aimed to reinforce the walls.
The research for styrofoam concrete wall panel used 12 specimens of panel,
1000 mm length, 300 mm width and 70 mm thick, with the addition of 15 mm thick
layer of plaster / mortar on both sides. The composition of 1 m
3
concrete styrofoam
consisted of 300 kg cement, using 0,5 water cement ratio, and styrofoam and sand
ratio of 60% : 40%. The specimens of panels as follows : 3 pieces without
reinforcement wiremesh, and 9 with wiremesh reinforcement having connector space
variations : 150, 250, 350 mm. There were 3 specimens for each of these connector
spacing variation. Test conducted was bending test.
The results of the research showed that concrete material made from
styrofoam had the average value of compressive strength : 3,348 MPa, weight:
1.510,86 kg / m
3
, and modulus of elasticity : 330,24 MPa. On the other hand, the
mortar material had the average value of compressive strength: 36,586 MPa in
average, and weight: 2.155,70 kg/m
3
. The average water-absorption of concrete made
from styrofoam was 11,97%. The average water-absorption of mortar was
10,77%. The weight of the panel without wiremesh before plastered was 97.98 kg/m
2
,
and 164,15 kg/m
2
after plastered. Whereas the panel with wiremesh, before plastered
105,23 kg/m
2
, and after the plastered had weight 170,12 kg/m
2
. Largest panel flexural
strength was obtained by the panel 2.A with flexural strength values of 6,64
MPa. The results also showed that wiremesh reinforcement and the closer the
connector space, increased flexural strength of the panel. |
| first_indexed | 2024-03-13T22:09:13Z |
| format | Thesis |
| id | oai:generic.eprints.org:90057 |
| institution | Universiti Gadjah Mada |
| last_indexed | 2024-03-13T22:09:13Z |
| publishDate | 2011 |
| publisher | [Yogyakarta] : Universitas Gadjah Mada |
| record_format | dspace |
| spelling | oai:generic.eprints.org:900572014-08-20T02:50:20Z https://repository.ugm.ac.id/90057/ PENGGUNAAN BETON STYROFOAM DENGAN PERKUATAN WIREMESH UNTUK PANEL DINDING TEBAL 7 CM , Andi Prasetiyo Wibowo , Ir. Suprapto Siswosukarto, Ph.D. ETD The recent technology of building material for walls, is getting toward to the use of walls that have some characters such as light, fast assembled and environmentally friendly. Making lightweight concrete wall from styrofoam waste is an effort to take advantage of styrofoam waste. Styrofoam has a very light weight unit that is about 13 to 15 kg/m 3 . The use wiremesh layers aimed to reinforce the walls. The research for styrofoam concrete wall panel used 12 specimens of panel, 1000 mm length, 300 mm width and 70 mm thick, with the addition of 15 mm thick layer of plaster / mortar on both sides. The composition of 1 m 3 concrete styrofoam consisted of 300 kg cement, using 0,5 water cement ratio, and styrofoam and sand ratio of 60% : 40%. The specimens of panels as follows : 3 pieces without reinforcement wiremesh, and 9 with wiremesh reinforcement having connector space variations : 150, 250, 350 mm. There were 3 specimens for each of these connector spacing variation. Test conducted was bending test. The results of the research showed that concrete material made from styrofoam had the average value of compressive strength : 3,348 MPa, weight: 1.510,86 kg / m 3 , and modulus of elasticity : 330,24 MPa. On the other hand, the mortar material had the average value of compressive strength: 36,586 MPa in average, and weight: 2.155,70 kg/m 3 . The average water-absorption of concrete made from styrofoam was 11,97%. The average water-absorption of mortar was 10,77%. The weight of the panel without wiremesh before plastered was 97.98 kg/m 2 , and 164,15 kg/m 2 after plastered. Whereas the panel with wiremesh, before plastered 105,23 kg/m 2 , and after the plastered had weight 170,12 kg/m 2 . Largest panel flexural strength was obtained by the panel 2.A with flexural strength values of 6,64 MPa. The results also showed that wiremesh reinforcement and the closer the connector space, increased flexural strength of the panel. [Yogyakarta] : Universitas Gadjah Mada 2011 Thesis NonPeerReviewed , Andi Prasetiyo Wibowo and , Ir. Suprapto Siswosukarto, Ph.D. (2011) PENGGUNAAN BETON STYROFOAM DENGAN PERKUATAN WIREMESH UNTUK PANEL DINDING TEBAL 7 CM. UNSPECIFIED thesis, UNSPECIFIED. http://etd.ugm.ac.id/index.php?mod=penelitian_detail&sub=PenelitianDetail&act=view&typ=html&buku_id=50415 |
| spellingShingle | ETD , Andi Prasetiyo Wibowo , Ir. Suprapto Siswosukarto, Ph.D. PENGGUNAAN BETON STYROFOAM DENGAN PERKUATAN WIREMESH UNTUK PANEL DINDING TEBAL 7 CM |
| title | PENGGUNAAN BETON STYROFOAM DENGAN PERKUATAN
WIREMESH UNTUK PANEL DINDING TEBAL 7 CM |
| title_full | PENGGUNAAN BETON STYROFOAM DENGAN PERKUATAN
WIREMESH UNTUK PANEL DINDING TEBAL 7 CM |
| title_fullStr | PENGGUNAAN BETON STYROFOAM DENGAN PERKUATAN
WIREMESH UNTUK PANEL DINDING TEBAL 7 CM |
| title_full_unstemmed | PENGGUNAAN BETON STYROFOAM DENGAN PERKUATAN
WIREMESH UNTUK PANEL DINDING TEBAL 7 CM |
| title_short | PENGGUNAAN BETON STYROFOAM DENGAN PERKUATAN
WIREMESH UNTUK PANEL DINDING TEBAL 7 CM |
| title_sort | penggunaan beton styrofoam dengan perkuatan wiremesh untuk panel dinding tebal 7 cm |
| topic | ETD |
| work_keys_str_mv | AT andiprasetiyowibowo penggunaanbetonstyrofoamdenganperkuatanwiremeshuntukpaneldindingtebal7cm AT irsupraptosiswosukartophd penggunaanbetonstyrofoamdenganperkuatanwiremeshuntukpaneldindingtebal7cm |