STUDI TENTANG RODA GILA MOTOR-GENERATOR INDUKSI UNTUK PENYIMPANAN ENERGI LISTRIK
This thesis has been written based on study and research on flywheel energy storage. In the research, three flywheels with the same mass of 10 kg and radius of 10 cm, 14 cm, and 18 cm were joined to induction motor-generator individually and the energy obtained were 12.3 kJ, 24.1 kJ, 39.9 kJ consecu...
Main Authors: | , |
---|---|
Format: | Thesis |
Published: |
[Yogyakarta] : Universitas Gadjah Mada
2011
|
Subjects: |
Summary: | This thesis has been written based on study and research on flywheel
energy storage. In the research, three flywheels with the same mass of 10 kg and
radius of 10 cm, 14 cm, and 18 cm were joined to induction motor-generator
individually and the energy obtained were 12.3 kJ, 24.1 kJ, 39.9 kJ consecutively.
The flywheel will be functioned as an energy storage device while the
induction generator is a mean to convert mechanical to electrical energy and vice
versa.
This converted energy is expected to be stored or to be distributed based
upon the work of kinetic energy from flywheel installed to that machine.
The use of flywheel to electrical energy storing and distributing can also
be used to overcome dip-voltage. Based on experiments using a 18 cm flywheel
in paralel with capacitors it was clear that the highest instantaneous discharging
voltage released 235V (neutral phase) which is greater than line voltage (220V). |
---|