SPLINTING OF IMPLANT WITH ACRYLIC RESIN TO MINIMIZE THE GAP BETWEEN IMPLANT ABUTMENT AND S UPERSTRUCTURE

SPLINTING OF IMPLANT WITH ACRYLIC RESIN TO MINIMIZE THE GAP BETWEEN IMPLANT ABUTMENT AND S UPERSTRUCTURE

<p>Background. The passive fit of superstructure is importance for successful implant treatment. Splinting implant with acrylicresin may decrease the distorsion and improve impression accuracy. Purpose. The purpose of this study was to investigate and compare the gap between implant abutment a...

Full description

Bibliographic Details
Main Author:	, Sularsih
Format:	Article
Published:	[Yogyakarta] : Fak.Kedokteran Gigi Universitas Gadjah Mada 2012

Similar Items

Fracture Strength of Acrylic Resin Reinforced with Glass Fibers in Simulated Implant-Supported Overdenture Abutments
by: Heba M. Moftah, et al.
Published: (2017-11-01)

Effect of Impla Fix and Duralay Acrylic Resin Splinting Materials on Dimensional Changes of Direct Implant Impressions
by: Gholam Reza Esfahanizade, et al.
Published: (2016-04-01)

MICROSCOPE EVALUATION OF MICRO-GAPS AT IMPLANT-ABUTMENT CONNECTION
by: Daniel Adrian Târtea, et al.
Published: (2024-06-01)

Evaluation of the dislodgement force of splinted restorations with engaging conical abutments over multiple nonparallel implants (in-vitro study)
by: Mohamed Moataz Khamis, et al.
Published: (2023-05-01)

Comparison between an Acrylic Splint Herbst and an Acrylic Splint Miniscrew-Herbst for Mandibular Incisors Proclination Control
by: Antonio Manni, et al.
Published: (2014-01-01)

Effect of Abutment Type and Tightening Sequence on Torque Maintenance Capacity after Mechanical Cycling in Splinted Implant-Supported Restorations
by: Leonardo Jiro Nomura Nakano, et al.
Published: (2021-10-01)

Implant-abutment connection types in dental implant systems
by: Bálint Kerkovits, et al.
Published: (2020-12-01)

Effect of implant‒abutment connections on abutment screw loosening: An in vitro study
by: Feridoun Parnia, et al.
Published: (2024-03-01)

Flexural resistance of 3D printing resin compared to conventional acrylic resins employed to build occlusal bite splints
by: Otavio Marino dos SANTOS NETO, et al.
Published: (2023-05-01)

Significance of Splinted and Non-splinted Implant Design and Stress Distribution Analysis: A Review
by: Vartaka Sohan, et al.
Published: (2023-01-01)

Progress of research on the design of implant-abutment interface
by: JIANG Jimin, WANG Yinlin, YANG Hang, HE Fuming
Published: (2024-09-01)

A Nonlinear Three-Dimensional Finite Element Analysis of Stress Distribution and Microstrain Evaluation in Short Dental Implants with Three Different Implant–Abutment Connections in Single and Splinted Conditions in the Posterior Mandible
by: Karishma S. Talreja, et al.
Published: (2023-01-01)

Facial rehabilitation with implant-retained nasal prosthesis of acrylic resin: a case report
by: Cássio Raniere Gomes do AMARAL, et al.
Published: (2021-03-01)

Effect of abutment design on fracture resistance of resin-matrix ceramic crowns for dental implant restoration: an in vitro study
by: Jie Lin, et al.
Published: (2023-06-01)

Sealing Capability and SEM Observation of the Implant-Abutment Interface
by: Fabio C. Lorenzoni, et al.
Published: (2011-01-01)

Healing Abutment Distortion in Implant Prostheses: An In Vitro Study
by: Chandrashekhar Pandey, et al.
Published: (2022-06-01)

Bacterial Microleakage at the Implant-Abutment Interface: An In Vitro Study
by: Simonetta D’Ercole, et al.
Published: (2022-06-01)

Comparison of biomechanical properties of different implant-abutment connections
by: Kalpana Devaraju, et al.
Published: (2018-01-01)

Enhanced Antibacterial Effect on Zirconia Implant Abutment by Silver Linear-Beam Ion Implantation
by: Yang Yang, et al.
Published: (2023-01-01)

Implant‐abutment emergence angle and profile in relation to peri‐implantitis: A systematic review
by: Sara Soulami, et al.
Published: (2022-08-01)

Wear of Titanium Implant Platforms with Different Abutment Connections and Abutment Materials: A Pilot Study
by: Teresa A. Mendes, et al.
Published: (2023-03-01)

Accuracy of the digital implant impression with splinted and non-splinted intraoral scan bodies: A systematic review
by: Pratiksha Shankar Shetty, et al.
Published: (2025-01-01)

The Effect of Implant–Abutment Contact Area on the Stress Generation of Bone-Level and Tissue-Level Implants
by: João Paulo Mendes Tribst, et al.
Published: (2025-03-01)

Microbial Leakage through Three Different Implant–Abutment Interfaces on Morse Taper Implants In Vitro
by: Ricardo Faria Ribeiro, et al.
Published: (2024-07-01)

An In Vitro Evaluation of Periotest Implant Stability Measurements Taken on Implant Retained Crowns and Healing Abutments
by: Cianna O'Brien, et al.
Published: (2024-06-01)

Influence of zirconia/glass veneer thickness and implant abutment material on the final shade of implant restorations
by: Nishu Kumari, et al.
Published: (2024-01-01)

Antibacterial Effects of Modified Implant Abutment Surfaces for the Prevention of Peri-Implantitis—A Systematic Review
by: Marie-Elise Jennes, et al.
Published: (2021-11-01)

Silver coating on dental implant-abutment connection screws as potential strategy to prevent loosening and minimizing bacteria adhesion
by: Eugenio Velasco-Ortega, et al.
Published: (2024-01-01)

Effect of a silicon-based sealing agent (GapSeal) on the reverse torque value of the abutment–implant screw
by: Talayeh Katebi, et al.
Published: (2024-12-01)

Stereomicroscopic evaluation of marginal fit of premachined and castable abutments at implant abutment connection interface – An In Vitro study
by: Prince Kumar, et al.
Published: (2023-01-01)

Influence of abutment design on clinical status of peri-implant tissues
by: Taiyeb-Ali, T.B., et al.
Published: (2009)

Influence of abutment design on retention of metal copings cemented to implants
by: Albano Porto da Cunha Jr, et al.
Published: (2016-12-01)

Longitudinal Observation of Micromotion upon Loading of Implant–Abutment Connection
by: Kohei Yamashita, et al.
Published: (2024-06-01)

Dental Implant Abutment Screw Loss: Presentation of 10 Cases
by: Maryam Soleimani, et al.
Published: (2024-04-01)

Special Issue on Enhancement of Titanium Dental Implant/Abutment Surfaces
by: Paolo Pesce, et al.
Published: (2022-08-01)

Impact of scannable healing abutment type on implant impression accuracy
by: Ms Yeonkyung Park, et al.
Published: (2023-09-01)

Assessing Microleakage at 2 Different Implant-Healing Abutment Interfaces
by: Soyeon Kim, et al.
Published: (2023-06-01)

Semirigid Cantilever Extension System for Splinting Implants: A Clinical Report
by: Raissa Micaella Marcello Machado, et al.
Published: (2014-01-01)

Acrylic resins/
by: 426299 Horn, Milton B.
Published: (1960)

Effect of Cyclic Loading on the Fixture-Abutment Microgap in Short Implants Versus Standard Implants: An In Vitro Study
by: Gholamreza Esfahanizadeh, et al.
Published: (2024-01-01)