Study on the structure and properties of fine-grained alumina fast sintered with high heating rate

Study on the structure and properties of fine-grained alumina fast sintered with high heating rate

Fine-grained alumina was obtained in 2 min by a new densification method based on Self-propagating High-temperature Synthesis plus Quick Pressing (SHS/QP). The sample was densified to more than 99% of theoretical density under a large mechanical pressure (100 MP) and a fast heating rate (1600 °C/min...

Descripció completa

Dades bibliogràfiques
Autors principals:	Meng, F, Fu, Z, Zhang, J, Wang, H, Wang, W, Wang, Y, Todd, R, Zhang, Q
Format:	Journal article
Idioma:	English
Publicat:	2008

Ítems similars

The nature of grain boundaries in alumina fabricated by fast sintering
per: Zhang, J, et al.
Publicat: (2010)

The nature of grain boundaries in alumina fabricated by fast sintering
per: Zhang, J, et al.
Publicat: (2010)

A constitutive model for the sintering of fine grained alumina
per: Ma, J, et al.
Publicat: (1997)

Densification mechanism of the ultra-fast sintering dense alumina
per: Dangqiang Wang, et al.
Publicat: (2020-02-01)

Microwave fast sintering of submicrometer alumina
per: Romualdo Rodrigues Menezes, et al.
Publicat: (2010-09-01)

Ultra-fast firing: effect of heating rate on sintering of 3YSZ, with and without an electric field
per: Ji, W, et al.
Publicat: (2017)

Grain Growth Behavior of Alumina in Zirconia-Toughened Alumina (ZTA) Ceramics During Pressureless Sintering
per: Yi Zhao, et al.
Publicat: (2025-01-01)

Ultra-fast High-temperature Sintering (UHS) of translucent alumina
per: Milad Kermani, et al.
Publicat: (2022-03-01)

SINTERING OF FINE-GRAINED MATERIALS BY INTERFACE REACTION CONTROLLED GRAIN-BOUNDARY DIFFUSION
per: Du, Z, et al.
Publicat: (1994)

Nano or micro grained alumina powder? A choose before sintering
per: Román, R., et al.
Publicat: (2008-12-01)

Templated grain growth in rapid sintered 3D-printed alumina ceramics
per: Anna-Katharina Hofer, et al.
Publicat: (2023-09-01)

PROPERTIES OF CaO SINTERED WITH ADDITION OF ACTIVE ALUMINA
per: A. Miskufova, et al.
Publicat: (2015-06-01)

Physical properties of sintered alumina doped with different oxides
per: Filipović Suzana, et al.
Publicat: (2018-01-01)

THE STRUCTURE OF CONSTITUTIVE LAWS FOR THE SINTERING OF FINE-GRAINED MATERIALS
per: Cocks, A
Publicat: (1994)

High transmittance and grain-orientated alumina ceramics fabricated by adding fine template particles
per: Han Chen, et al.
Publicat: (2022-03-01)

Effects of yttrium on the sintering and microstructure of alumina-silicon carbide "nanocomposites"
per: Cock, A, et al.
Publicat: (2005)

Temperature-dependent thermal properties of spark plasma sintered alumina
per: Saheb Nouari, et al.
Publicat: (2017-01-01)

Effect of LZSA Glass-Ceramic Addition on Pressureless Sintered Alumina. Part I: Grain Growth
per: Oscar Rubem Klegues Montedo, et al.
Publicat: (2017-06-01)

Preparation and Sintering Behaviour of Alumina Powder by Ammonia Precipitation Method
per: Wang Liuyan
Publicat: (2017-01-01)

Wear resistance of reaction sintered alumina/mullite composites
per: Luo, H, et al.
Publicat: (2008)

Flash sintering of high-purity alumina at room temperature
per: Yueji Li, et al.
Publicat: (2023-12-01)

Effects of PVA-PEG binders system on microstructure and properties of sintered alumina
per: Jaafar, Che Nor Aiza, et al.
Publicat: (2014)

Effect of Sintering Parameters on the Mechanical Properties and Wear Performance of Alumina Inserts
per: Abdul Aziz Adam, et al.
Publicat: (2022-11-01)

Effect of silica sol addition on sintering properties of porous alumina ceramics
per: LIN Hong-yu, et al.
Publicat: (2021-05-01)

Progress in sintering technology of transparent polycrystalline alumina ceramics
per: Jun Yin, et al.
Publicat: (2024-12-01)

Boron induced abnormal grain growth in alumina
per: Christian Bechteler, et al.
Publicat: (2024-09-01)

Effect of microwave sintering on the properties of copper oxide doped alumina toughened zirconia (ATZ)
per: M.K.G. Abbas, et al.
Publicat: (2023-07-01)

Synthesis and sintering of nanocrystalline alumina and aluminum nitride
per: Panchula, Martin Lawrence
Publicat: (2014)

Contamination and Sinterability of Planetary-milled Alumina [Translated]†
per: Osami Abe
Publicat: (2014-05-01)

Properties of alumina with RHA-reinforced aluminum composite using different sintering profile
per: Mohamad Aznan, M. N., et al.
Publicat: (2017)

Influence of Alumina Nanofibers Sintered by the Spark Plasma Method on Nickel Mechanical Properties
per: Leonid Agureev, et al.
Publicat: (2021-03-01)

Application of fine-grained coke breeze fractions in the process of iron ore sintering
per: M. Niesler, et al.
Publicat: (2014-01-01)

Importance of intensive mixing on sintering with fine-grained iron ore materials: characterization and function mechanism
per: Zhiyun Ji, et al.
Publicat: (2020-11-01)

Densification and Mechanical Properties of Alumina Ceramics via Two-Step Sintering With Different Holding Times
per: Anis Syufina Mohammad Saufi, et al.
Publicat: (2021-10-01)

Effect of Holding Time During Sintering on Microstructure and Properties of 3D Printed Alumina Ceramics
per: Yu Pan, et al.
Publicat: (2020-04-01)

Cost Benefits Analysis for Waste Heat Utilization in Sinter Cooling Bed
per: Y. Liu, et al.
Publicat: (2014-08-01)

MICROSTRUCTURE AND PROPERTIES OF POWDER STEELS SINTERED BY HIGH-RATE ELECTRIC HEATING
per: Cristina IONICI, et al.
Publicat: (2010-09-01)

Ultrafast high-temperature sintering of dense and textured alumina
per: Behera, Rohit Pratyush, et al.
Publicat: (2022)

Microstructure Evolution During the Sintering of Freeze-Cast Alumina
per: Daniel D. Athayde, et al.
Publicat: (2024-02-01)

Numerical Simulation of Sintering of DLP Printed Alumina Ceramics
per: Michele De Lisi, et al.
Publicat: (2022-06-01)