Stresses in a flat plate due to a loose pin pressing against a cracked hole

Stresses in a flat plate due to a loose pin pressing against a cracked hole

Bibliographic Details
Main Authors:	Lin, S, Hills, D, Nowell, D
Format:	Journal article
Published:	1997

Similar Items

The solution of cracks emanating from circular holes
by: Lin, S, et al.
Published: (1996)

Measurement of residual stresses in beams and plates using the crack compliance technique
by: Nowell, D, et al.
Published: (2000)

Stress concentration due to circular hole in glass fibre reinforced flat plate /
by: Zulhilmi Mohammad, 1988-, et al.
Published: (2012)

Designing against fretting fatigue: crack self-arrest
by: Moobola, R, et al.
Published: (1998)

STRESS INTENSITY CALIBRATIONS FOR CLOSED CRACKS
by: Hills, D, et al.
Published: (1989)

CRACK LINE AND EDGE GREEN-FUNCTION FOR STRESS INTENSITY FACTORS OF INCLINED EDGE CRACKS - DISCUSSION
by: Hills, D, et al.
Published: (1993)

Stress concentration due to circular hole in glass fibre reinforced flat plate [electronic resources] /
by: Zulhilmi Mohammad, 1988-
Published: (2012)

Residual stress measurement by the crack compliance technique
by: Tochilin, S, et al.
Published: (1998)

A theoretical and experimental investigation of the influence of crack tip plasticity on fatigue crack closure
by: Nowell, D, et al.
Published: (1999)

THE STRESS-CONCENTRATION PRODUCED BY A HOLE NEAR AN INTERFACE OR JOINT
by: Kelly, P, et al.
Published: (1993)

Prediction of fretting crack propagation based on a short crack methodology
by: Fouvry, S, et al.
Published: (2008)

Stresses around neighbouring elliptical holes in flat plates.
by: Alexandrakis, Alkibiades
Published: (2008)

Effect of Crack Length on Stresses in a Plate with a Hole
by: Thaker Saleh Dawood, et al.
Published: (2022-04-01)

CRACK INITIATION CRITERIA IN FRETTING FATIGUE
by: Nowell, D, et al.
Published: (1990)

Open cracks at or near free edges
by: Nowell, D, et al.
Published: (1987)

Comparison of crack closure measurements using moire interferometry and results from a Dugdale-type crack closure model
by: Fellows, L, et al.
Published: (1997)

THE EDGE INTERFACE CRACK
by: Kelly, P, et al.
Published: (1994)

THE EVALUATION OF STRESS INTENSITY FACTORS FOR PLANE CRACKS IN RESIDUAL-STRESS FIELDS
by: Wilks, M, et al.
Published: (1993)

Stress intensity factor and fracture of plates with cracked holes
by: Venugopalan Sairama
Published: (2014)

On the initiation of fretting fatigue cracks
by: Fellows, L, et al.
Published: (1997)

PLANE CRACKS NEAR INTERFACES
by: Hills, D, et al.
Published: (1989)

A comparison between actual and stress intensity near-crack-tip elastic fields
by: McKellar, D, et al.
Published: (2000)

Design and modal analysis of flat plate with eccentric hole
by: Nuraini, Aziz
Published: (2012)

Modelling of growth of three-dimensional cracks by a continuous distribution of dislocation loops
by: Dai, D, et al.
Published: (1997)

Film Cooling Performance of the Staggered Arrangement of Auxiliary Holes and Main Holes on a Flat Plate
by: W. Zhang, et al.
Published: (2021-01-01)

Surface roughness and crack initiation in fretting fatigue
by: Moobola, R, et al.
Published: (1999)

AN ANALYSIS OF COUPLING BETWEEN PLANE CRACKS AND CONTACTS
by: Munisamy, R, et al.
Published: (1995)

Minimization of the Stressed State of a Stringer Plate with a Hole and Rectilinear Cracks
by: Minavar V. Mir-Salim-zade
Published: (2019-06-01)

PARTIAL CLOSURE AND FRICTIONAL SLIP OF 3-D CRACKS
by: Dai, D, et al.
Published: (1993)

STRESS-FIELD DUE TO A DISLOCATION ON THE INTERFACE BETWEEN 2 QUARTER PLANES
by: Kelly, P, et al.
Published: (1993)

Analytical and numerical modelling of plasticity-induced crack closure in cold-expanded holes
by: De Matos, P, et al.
Published: (2008)

CALCULATION OF THE OPENING DISPLACEMENT OF SURFACE-BREAKING PLANE CRACKS
by: Dewynne, J, et al.
Published: (1992)

Research on the Hole Length Ratio of Fan-Shaped Holes in Flat Plate Film Cooling
by: Xun Zhou, et al.
Published: (2021-11-01)

Torsional contact between elastically similar flat-ended cylinders
by: Kartal, M, et al.
Published: (2010)

Torsional contact between elastically similar flat-ended cylinders
by: Kartal, M, et al.
Published: (2010)

The effect of wear on nucleation of cracks at the edge of an almost complete contact
by: Hills, D, et al.
Published: (2010)

The effect of wear on nucleation of cracks at the edge of an almost complete contact
by: Hills, D, et al.
Published: (2010)

THE COMPLETE STRESS-FIELD DUE TO A DISLOCATION LOCATED ANYWHERE IN 2 BONDED QUARTER PLANES
by: Kelly, P, et al.
Published: (1994)

Shakedown of a plate with a circular hole: an educational problem
by: Chen, Y, et al.
Published: (2023)

EIGENSTRAIN METHODS IN 3-DIMENSIONAL CRACK PROBLEMS - AN ALTERNATIVE INTEGRATION PROCEDURE
by: Dai, D, et al.
Published: (1993)