Creation of hot dense matter in short-pulse laser-plasma interaction with tamped titanium foils

Dense titanium plasma has been heated to an electron temperature up to 1300 eV with a 100 TW, high intensity short-pulse laser. The experiments were conducted using Ti foils (5 μm thick) sandwiched between layers of either aluminum (1 or 2 μm thick) or plastic (2 μm thick) to prevent the effects of...

Cur síos iomlán

Sonraí bibleagrafaíochta
Príomhchruthaitheoirí: Chen, SN, Gregori, G, Patel, P, Chung, H, Evans, R, Freeman, R, Saiz, E, Glenzer, S, Hansen, S, Khattak, F, King, J, Mackinnon, A, Notley, M, Pasley, JR, Riley, D, Stephens, R, Weber, R, Wilks, S, Beg, F
Formáid: Journal article
Teanga:English
Foilsithe / Cruthaithe: 2007
Cur síos
Achoimre:Dense titanium plasma has been heated to an electron temperature up to 1300 eV with a 100 TW, high intensity short-pulse laser. The experiments were conducted using Ti foils (5 μm thick) sandwiched between layers of either aluminum (1 or 2 μm thick) or plastic (2 μm thick) to prevent the effects of prepulse. Targets of two different sizes, i.e., 250 × 250 μm 2 and 1×1 mm2 were used. Spectral measurements of the Ti inner-shell emission, in the region between 4 and 5 keV, were taken from, the front-side (i.e., the laser illuminated side) of the target. The data show large shifts in the Kα emission from open-shell ions, suggesting bulk heating of the sample at near solid density, which was largest for reduced mass targets. Comparison with collisional radiative and 2D radiation hydrodynamics codes indicates a peak temperature of Te,peak= 1300 eV of solid titanium plasma in ∼0.2 μm thin layer. Higher bulk temperature (T e,bulk=100 eV) for aluminum tamped compared to CH tamped targets (Te,bulk=40 eV) was observed. A possible explanation for this difference is described whereby scattering due to the nuclear charge of the tamping material leads to modified electron transport behavior. © 2007 American Institute of Physics.