Quasi-static thermal modelling of multi-scale sliding contact for unlubricated brush seal materials

Quasi-static thermal modelling of multi-scale sliding contact for unlubricated brush seal materials

Mostra altre versioni (1)

Prediction of the contact temperature between two materials in high speed rubbing contact is essential when analysing the wear mechanism and modelling wear rate for unlubricated contact. Conventionally the assumptions used for a pin-on-disc configuration are either a steady heat source at the contac...

Descrizione completa

Dettagli Bibliografici
Autori principali:	Xia, Q, Gillespie, D, Owen, A, Franceschini, G
Natura:	Conference item
Pubblicazione:	American Society of Mechanical Engineers 2018

Documenti analoghi

Quasi-static thermal modelling of multi-scale sliding contact for unlubricated brush seal materials
di: Xia, Q, et al.
Pubblicazione: (2019)

Effect of sliding speed and counterface properties on the tribo-oxidation of brush seal material under dry sliding conditions
di: Thakare, MR, et al.
Pubblicazione: (2013)

A Static Friction Model for Unlubricated Contact of Random Rough Surfaces at Micro/Nano Scale
di: Shengguang Zhu, et al.
Pubblicazione: (2021-03-01)

An investigation of flow, mechanical, and thermal performance of conventional and pressure-balanced brush seals
di: Pekris, M, et al.
Pubblicazione: (2014)

Progress in tribological research of SiC ceramics in unlubricated sliding-A review
di: Wei Zhang, et al.
Pubblicazione: (2020-05-01)

A slow-speed rotating test facility for characterising the stiffness of brush seals
di: Franceschini, G, et al.
Pubblicazione: (2006)

Brush seal contact force theory and correlation with tests
di: Ertuğrul Tolga Duran
Pubblicazione: (2022-04-01)

Calculation and AFM Experimental Research on Slip Friction for Unlubricated Spherical Contact with Roughness Effect
di: Shengguang Zhu, et al.
Pubblicazione: (2021-11-01)

Evaluation of gold extrusion proces with almost unlubricated condition /
di: Ahmad Haqkim Muhamad Malack, 1992-, et al.
Pubblicazione: (2015)

Rotating Brush Seal
di: S. B. Lattime, et al.
Pubblicazione: (2002-01-01)

Rotating Brush Seal
di: Lattime S. B., et al.
Pubblicazione: (2002-01-01)

Brush Seal Performance with Ideal Gas Working Fluid under Static Rotor Condition
di: Altyib Abdallah Mahmoud Ahmed, et al.
Pubblicazione: (2024-07-01)

Evaluation of gold extrusion proces with almost unlubricated conditio [electroni resource] /
di: Ahmad Haqkim Muhamad Malack, 1992-, et al.
Pubblicazione: (2015)

The effects of external loading on low displacement wear rates of unlubricated steels
di: Blades, L, et al.
Pubblicazione: (2021)

The analysis of wear intensity of lubricated and unlubricated locomotive wheel sets flanges
di: Å arÅ«nas MikaliÅ«nas, et al.
Pubblicazione: (2004-02-01)

The analysis of wear intensity of lubricated and unlubricated locomotive wheel sets flanges
di: Š. Mikaliūnas, et al.
Pubblicazione: (2004-02-01)

Modelling bristle bending in brush seals
di: Howell, P, et al.
Pubblicazione: (1999)

Quasi-Static Sliding Wear Analysis of 3D Rough Surface Considering Changes in the Point of Contact
di: Yunji Kim, et al.
Pubblicazione: (2022-12-01)

Bidirectional Brush Seals – Post-Test Analysis
di: Robert C. Hendricks, et al.
Pubblicazione: (1999-01-01)

A Brush Seals Program Modeling and Developments
di: Robert C. Hendricks, et al.
Pubblicazione: (1998-01-01)

Brush seal with thermo-regulating bimetal elements
di: Stanclik Michał
Pubblicazione: (2018-10-01)

Numerical Simulation of Static Seal Contact Mechanics Including Hydrostatic Load at the Contacting Interface
di: De Huang, et al.
Pubblicazione: (2020-12-01)

Improved understanding of stiffness in leaf-type filament seals
di: Jahn, I, et al.
Pubblicazione: (2015)

Static Characteristics of Finger Seal considering Contact between Fingers and Rotor
di: Sai Zhang, et al.
Pubblicazione: (2022-01-01)

Adhesive contact of rough brushes
di: Qiang Li, et al.
Pubblicazione: (2018-09-01)

Analytical modeling and experimental validation of heating at the leaf seal/rotor interface
di: Pekris, M, et al.
Pubblicazione: (2016)

Analytical modeling and experimental validation of heating at the leaf seal/rotor interface
di: Gillespie, D, et al.
Pubblicazione: (2016)

Improved Understanding of Blow-Down in Filament Seals
di: Franceschini, G, et al.
Pubblicazione: (2010)

EXPERIMENTAL CHARACTERISATION OF THE STIFFNESS AND LEAKAGE OF A PROTOTYPE LEAF SEAL FOR TURBINE APPLICATIONS
di: Jahn, I, et al.
Pubblicazione: (2008)

Analysis of Brush Seal Interaction with Steam Turbine Rotor-Shafts
di: Nonso Omenife, et al.
Pubblicazione: (2024-01-01)

IMPROVED UNDERSTANDING OF BLOW-DOWN IN FILAMENT SEALS
di: Franceschini, G, et al.
Pubblicazione: (2008)

Features of the Calculated Determination of the Thermal State of the Turbo Generator Brush-Contact Device
di: Anton Ye. Kovryha
Pubblicazione: (2024-12-01)

Retraction Note: Friction and wear of polystyrene crystal sliding against steel 100Cr6 in unlubricated contact (PCSS: (2022), 23(2), (293-301), https://doi.org/10.15330/pcss.23.2.293-301)
di: Soufyane Aounallah, et al.
Pubblicazione: (2022-05-01)

Planning, Sensing, and Control for Contact-rich Robotic Manipulation with Quasi-static Contact Models
di: Pang, Tao
Pubblicazione: (2023)

Modeling of Contact Forces for Brushing Tools
di: Eckart Uhlmann, et al.
Pubblicazione: (2021-07-01)

The influence of physical properties of materials used for slide rings on the process of heat transfer in the non-contacting face seals
di: Blasiak Slawomir
Pubblicazione: (2017-01-01)

Wear and Leakage Behaviors of Brush Seal Considering Eccentricity and Radial Deformation
di: Yiren Xu, et al.
Pubblicazione: (2023-04-01)

Theoretical and numerical investigation into brush seal hysteresis without pressure differential
di: Yuchi Kang, et al.
Pubblicazione: (2019-11-01)

Quasi-static analysis and modeling for micro ohmic contacts in MEMS switches
di: See, Raymond Seng Hong.
Pubblicazione: (2011)

Efficient numerical methods to approach solutions of quasi-static contact problems
di: Lionel Ouya Ndjansi, et al.
Pubblicazione: (2025-02-01)