Techniques for experimental measurement of fatigue crack closure

Techniques for experimental measurement of fatigue crack closure

Bibliographic Details
Main Author:	Nowell, D
Format:	Conference item
Published:	2007

Similar Items

A theoretical and experimental investigation of the influence of crack tip plasticity on fatigue crack closure
by: Nowell, D, et al.
Published: (1999)

Experimental and numerical investigation of thickness effects in plasticity-induced fatigue crack closure
by: de Matos, P, et al.
Published: (2009)

A boundary element model of plasticity-induced fatigue crack closure
by: Nowell, D
Published: (1998)

Optical methods for measurement of fatigue crack closure: moire interferometry and digital image correlation
by: Nowell, D, et al.
Published: (2010)

On the accurate assessment of crack opening and closing stresses in plasticity-induced fatigue crack closure problems
by: de Matos, P, et al.
Published: (2007)

Comparison of crack closure measurements using moire interferometry and results from a Dugdale-type crack closure model
by: Fellows, L, et al.
Published: (1997)

Crack closure measurements using Moires interferometry with photoresist gratings
by: Fellows, L, et al.
Published: (2004)

A comparison of two and three-dimensional analyses of fatigue crack closure
by: Alizadeh, H, et al.
Published: (2007)

Numerical simulation of plasticity-induced fatigue crack closure with emphasis on the crack growth scheme: 2D and 3D analyses
by: de Matos, P, et al.
Published: (2008)

Mechanics of fatigue crack closure /
by: Newman, J. C., et al.
Published: (1988)

The use of closure maps to characterise plasticity induced crack closure
by: McKellar, D, et al.
Published: (2003)

Measurement of crack closure after the application of an overload cycle, using moire interferometry
by: Fellows, L, et al.
Published: (2005)

Investigation of fatigue crack models by micro-scale measurement of crack tip deformation
by: Nowell, D, et al.
Published: (2018)

Measurement and analysis of fatigue crack deformation at the micro-scale
by: Nowell, D, et al.
Published: (2017)

Small crack methodologies and crack arrest in fretting fatigue
by: Nowell, D, et al.
Published: (1999)

The influence of the Poisson's ratio and corner point singularities in three-dimensional plasticity-induced fatigue crack closure: A numerical study
by: de Matos, P, et al.
Published: (2008)

PARTIAL CLOSURE AND FRICTIONAL SLIP OF 3-D CRACKS
by: Dai, D, et al.
Published: (1993)

On the initiation of fretting fatigue cracks
by: Fellows, L, et al.
Published: (1997)

CRACK INITIATION CRITERIA IN FRETTING FATIGUE
by: Nowell, D, et al.
Published: (1990)

Crack closure effect of fatigue crack under cyclic tensile loading
by: Akiyuki TAKAHASHI, et al.
Published: (2015-09-01)

Fatigue crack closure: a myth or a misconception?
by: Tong, J, et al.
Published: (2019)

Residual stress measurement by the crack compliance technique
by: Tochilin, S, et al.
Published: (1998)

Application of digital image correlation to the investigation of crack closure following overloads
by: Nowell, D, et al.
Published: (2010)

The use of notch and short crack approaches to fretting fatigue threshold prediction: Theory and experimental validation
by: Dini, D, et al.
Published: (2006)

Surface roughness and crack initiation in fretting fatigue
by: Moobola, R, et al.
Published: (1999)

Measurement of fatigue crack deformation on the macro- and micro-scale: uniform and non-uniform loading
by: Nowell, D, et al.
Published: (2016)

A dislocation model of plasticity with particular application to fatigue crack closure
by: McKellar, D
Published: (2001)

Analytical and numerical modelling of plasticity-induced crack closure in cold-expanded holes
by: De Matos, P, et al.
Published: (2008)

Designing against fretting fatigue: crack self-arrest
by: Moobola, R, et al.
Published: (1998)

Effect of residual stress redistribution on fatigue crack growth pertinent to crack closure and applied load
by: Shuai Luan, et al.
Published: (2023-09-01)

Fatigue crack growth resistance and crack closure behavior in two aluminum alloys for aeronautical applications
by: Elenice Maria Rodrigues, et al.
Published: (2005-09-01)

Measurement of residual stresses in beams and plates using the crack compliance technique
by: Nowell, D, et al.
Published: (2000)

A Study on Fatigue Crack Closure Associated with the Growth of Long Crack in a New Titanium Alloy
by: Jiarui Liu, et al.
Published: (2023-07-01)

Plasticity-induced fatigue crack closure: an investigation using digital image correlation
by: O'Connor, S
Published: (2015)

Study of Crack Closure Effect of Hull Plate under Low Cycle Fatigue
by: Qin Dong, et al.
Published: (2022-10-01)

Fatigue Crack Growth Behaviour and Role of Roughness-Induced Crack Closure in CP Ti: Stress Amplitude Dependence
by: Mansur Ahmed, et al.
Published: (2021-10-01)

Analysis of pad size effects in fretting fatigue using short crack arrest methodologies
by: Araujo, J, et al.
Published: (1999)

Crack Analysis Using Extended Finite Element Method With Virtual Crack Closure Technique
by: Wong , Ee Fun
Published: (2016)

Crack analysis using extended finite element method with virtual crack closure technique
by: Wong, Ee Fun
Published: (2016)

Digital image correlation measurement of near-tip fatigue crack displacement fields: constant amplitude loading and load history effects
by: Nowell, D, et al.
Published: (2013)