Toward optimization of centrifugal barrel polishing procedure for treatment of niobium cavities

Toward optimization of centrifugal barrel polishing procedure for treatment of niobium cavities

Centrifugal barrel polishing (CBP) is a simple and environmentally friendly method that can be applied for mechanical abrasion of the cavity interior in order to remove the mechanically damaged surface after its production. The CBP recipes described in the literature, however, require CBP to be perf...

Descripció completa

Dades bibliogràfiques
Autors principals:	Prudnikava, A, Tamashevich, Y, Steirle, A, Yanushkevich, K, Foster, B
Format:	Journal article
Publicat:	Institute of Electrical and Electronics Engineers 2018

Ítems similars

Surface characterization of nitrogen-doped Nb (100) large-grain superconducting RF cavity material
per: Pandey, A, et al.
Publicat: (2018)

ELECTROLYTE-PLASMA POLISHING OF TITANIUM AND NIOBIUM ALLOYS
per: Yu. G. Aliakseyeu, et al.
Publicat: (2018-05-01)

PECULIARITIES OF FINAL POLISHING OF ROLLERS WITH BARREL-TYPE SURFACE
per: G. P. Krivko, et al.
Publicat: (2006-02-01)

Niobium superconducting rf cavity fabrication by electrohydraulic forming
per: E. Cantergiani, et al.
Publicat: (2016-11-01)

Field dependent surface resistance of niobium on copper cavities
per: T. Junginger
Publicat: (2015-07-01)

Plasma treatment of bulk niobium surface for superconducting rf cavities: Optimization of the experimental conditions on flat samples
per: M. Rašković, et al.
Publicat: (2010-11-01)

Niobium near-surface composition during nitrogen infusion relevant for superconducting radio-frequency cavities
per: Semione, G, et al.
Publicat: (2019)

Effect of mild baking on superconducting niobium cavities investigated by sequential nanoremoval
per: A. Romanenko, et al.
Publicat: (2013-01-01)

Development of an advanced electropolishing setup for multicell high gradient niobium cavities
per: F. Éozénou, et al.
Publicat: (2012-08-01)

Niobium near-surface composition during nitrogen infusion relevant for superconducting radio-frequency cavities
per: G. D. L. Semione, et al.
Publicat: (2019-10-01)

Involvement of hydrogen-vacancy complexes in the baking effect of niobium cavities
per: B. Visentin, et al.
Publicat: (2010-05-01)

Field-dependent surface resistance for superconducting niobium accelerating cavities
per: Wolfgang Weingarten
Publicat: (2011-10-01)

Laser polishing of niobium for superconducting radio-frequency accelerator applications
per: Liang Zhao, et al.
Publicat: (2014-08-01)

Niobium and Niobium Compounds
per: Eckert, J.
Publicat: (1993-01-01)

Development and modeling of a device for strengthening the channels of gun barrels by the method of vibration-centrifugal processing
per: V. I. Topchii, et al.
Publicat: (2019-04-01)

Understanding mechanism of performance improvement in nitrogen-doped niobium superconducting radio frequency cavity
per: Xiaotian Fang, et al.
Publicat: (2023-02-01)

Temperature mapping on a niobium-coated copper superconducting radio-frequency cavity
per: Antonio Bianchi, et al.
Publicat: (2023-10-01)

Kapitza resistance cooling of single crystal (111) niobium for superconducting rf cavities
per: Jay Amrit, et al.
Publicat: (2010-02-01)

Evidence of high-field radio-frequency hot spots due to trapped vortices in niobium cavities
per: G. Ciovati, et al.
Publicat: (2008-12-01)

Niobium thin film deposition studies on copper surfaces for superconducting radio frequency cavity applications
per: W. M. Roach, et al.
Publicat: (2012-06-01)

Three-dimensional simulations of the surface topography evolution of niobium superconducting radio frequency cavities
per: Rađenović Branislav M., et al.
Publicat: (2014-01-01)

Design of Refrigeration System and Research on Centrifuge Cavity Temperature Field for Refrigerated Centrifuge in Medical Labs
per: 陈剑波, et al.
Publicat: (2010-01-01)

Flux expulsion in niobium superconducting radio-frequency cavities of different purity and essential contributions to the flux sensitivity
per: P. Dhakal, et al.
Publicat: (2020-02-01)

Optimization Of Double-Layer Braced Barrel Vaults
per: Grzywiński Maksym
Publicat: (2015-12-01)

Toward Active-Site Compression in Rigid-Rod ?-Barrels
per: Yoann Baudry, et al.
Publicat: (2004-04-01)

Effect of low temperature baking in nitrogen on the performance of a niobium superconducting radio frequency cavity
per: Pashupati Dhakal, et al.
Publicat: (2018-03-01)

Refining of Tantalum and Niobium
per: Choudhury, A.
Publicat: (1993-01-01)

Post-processing of direct metal deposited AlCrCoCuFeNi HEA using centrifugal barrel finishing
per: Modikwe Thembisile, et al.
Publicat: (2022-01-01)

The Surface Treatment of Niobium Superconducting Reentrant Cavities by Means of High Temperature Nitrogen Plasma Based Ion Implantation
per: Rogério Moraes Oliveira, et al.
Publicat: (2019-12-01)

Effects of processing history on the evolution of surface damage layer and dislocation substructure in large grain niobium cavities
per: D. Kang, et al.
Publicat: (2015-12-01)

Surface characterization of nitrogen-doped high purity niobium coupons compared with superconducting rf cavity performance
per: Pashupati Dhakal, et al.
Publicat: (2019-12-01)

Measurement of the high-field Q drop in the TM_{010} and TE_{011} modes in a niobium cavity
per: Gianluigi Ciovati, et al.
Publicat: (2006-04-01)

3.5-cell large grain niobium superconducting cavity for a dc superconducting rf photoinjector
per: Shengwen Quan, et al.
Publicat: (2010-04-01)

Modeling and simulation of bullet-barrel interaction process for the damaged gun barrel
per: Chao Shen, et al.
Publicat: (2019-12-01)

Two different origins of the Q-slope problem in superconducting niobium film cavities for a heavy ion accelerator at CERN
per: A. Miyazaki, et al.
Publicat: (2019-07-01)

Measurement of the high-field Q drop in a high-purity large-grain niobium cavity for different oxidation processes
per: G. Ciovati, et al.
Publicat: (2007-06-01)

Cavity-Integrated Ultra-Narrow Superconducting Nanowire Single-Photon Detector Based on a Thick Niobium Nitride Film
per: Marsili, Francesco, et al.
Publicat: (2014)

Effect of high temperature heat treatments on the quality factor of a large-grain superconducting radio-frequency niobium cavity
per: P. Dhakal, et al.
Publicat: (2013-04-01)

Effort towards symmetric removal and surface smoothening of 1.3-GHz niobium single-cell cavity in vertical electropolishing using a unique cathode
per: Vijay Chouhan, et al.
Publicat: (2017-08-01)

Modelling the emergence of whisker barrels
per: Sebastian S James, et al.
Publicat: (2020-09-01)