Toward optimization of centrifugal barrel polishing procedure for treatment of niobium cavities

Toward optimization of centrifugal barrel polishing procedure for treatment of niobium cavities

Centrifugal barrel polishing (CBP) is a simple and environmentally friendly method that can be applied for mechanical abrasion of the cavity interior in order to remove the mechanically damaged surface after its production. The CBP recipes described in the literature, however, require CBP to be perf...

Cur síos iomlán

Sonraí bibleagrafaíochta
Príomhchruthaitheoirí:	Prudnikava, A, Tamashevich, Y, Steirle, A, Yanushkevich, K, Foster, B
Formáid:	Journal article
Foilsithe / Cruthaithe:	Institute of Electrical and Electronics Engineers 2018

Míreanna comhchosúla

Surface characterization of nitrogen-doped Nb (100) large-grain superconducting RF cavity material
de réir: Pandey, A, et al.
Foilsithe / Cruthaithe: (2018)

ELECTROLYTE-PLASMA POLISHING OF TITANIUM AND NIOBIUM ALLOYS
de réir: Yu. G. Aliakseyeu, et al.
Foilsithe / Cruthaithe: (2018-05-01)

PECULIARITIES OF FINAL POLISHING OF ROLLERS WITH BARREL-TYPE SURFACE
de réir: G. P. Krivko, et al.
Foilsithe / Cruthaithe: (2006-02-01)

Niobium superconducting rf cavity fabrication by electrohydraulic forming
de réir: E. Cantergiani, et al.
Foilsithe / Cruthaithe: (2016-11-01)

Field dependent surface resistance of niobium on copper cavities
de réir: T. Junginger
Foilsithe / Cruthaithe: (2015-07-01)

Plasma treatment of bulk niobium surface for superconducting rf cavities: Optimization of the experimental conditions on flat samples
de réir: M. Rašković, et al.
Foilsithe / Cruthaithe: (2010-11-01)

Niobium near-surface composition during nitrogen infusion relevant for superconducting radio-frequency cavities
de réir: Semione, G, et al.
Foilsithe / Cruthaithe: (2019)

Effect of mild baking on superconducting niobium cavities investigated by sequential nanoremoval
de réir: A. Romanenko, et al.
Foilsithe / Cruthaithe: (2013-01-01)

Development of an advanced electropolishing setup for multicell high gradient niobium cavities
de réir: F. Éozénou, et al.
Foilsithe / Cruthaithe: (2012-08-01)

Niobium near-surface composition during nitrogen infusion relevant for superconducting radio-frequency cavities
de réir: G. D. L. Semione, et al.
Foilsithe / Cruthaithe: (2019-10-01)

Involvement of hydrogen-vacancy complexes in the baking effect of niobium cavities
de réir: B. Visentin, et al.
Foilsithe / Cruthaithe: (2010-05-01)

Field-dependent surface resistance for superconducting niobium accelerating cavities
de réir: Wolfgang Weingarten
Foilsithe / Cruthaithe: (2011-10-01)

Laser polishing of niobium for superconducting radio-frequency accelerator applications
de réir: Liang Zhao, et al.
Foilsithe / Cruthaithe: (2014-08-01)

Niobium and Niobium Compounds
de réir: Eckert, J.
Foilsithe / Cruthaithe: (1993-01-01)

Development and modeling of a device for strengthening the channels of gun barrels by the method of vibration-centrifugal processing
de réir: V. I. Topchii, et al.
Foilsithe / Cruthaithe: (2019-04-01)

Understanding mechanism of performance improvement in nitrogen-doped niobium superconducting radio frequency cavity
de réir: Xiaotian Fang, et al.
Foilsithe / Cruthaithe: (2023-02-01)

Temperature mapping on a niobium-coated copper superconducting radio-frequency cavity
de réir: Antonio Bianchi, et al.
Foilsithe / Cruthaithe: (2023-10-01)

Kapitza resistance cooling of single crystal (111) niobium for superconducting rf cavities
de réir: Jay Amrit, et al.
Foilsithe / Cruthaithe: (2010-02-01)

Evidence of high-field radio-frequency hot spots due to trapped vortices in niobium cavities
de réir: G. Ciovati, et al.
Foilsithe / Cruthaithe: (2008-12-01)

Niobium thin film deposition studies on copper surfaces for superconducting radio frequency cavity applications
de réir: W. M. Roach, et al.
Foilsithe / Cruthaithe: (2012-06-01)

Three-dimensional simulations of the surface topography evolution of niobium superconducting radio frequency cavities
de réir: Rađenović Branislav M., et al.
Foilsithe / Cruthaithe: (2014-01-01)

Design of Refrigeration System and Research on Centrifuge Cavity Temperature Field for Refrigerated Centrifuge in Medical Labs
de réir: 陈剑波, et al.
Foilsithe / Cruthaithe: (2010-01-01)

Flux expulsion in niobium superconducting radio-frequency cavities of different purity and essential contributions to the flux sensitivity
de réir: P. Dhakal, et al.
Foilsithe / Cruthaithe: (2020-02-01)

Optimization Of Double-Layer Braced Barrel Vaults
de réir: Grzywiński Maksym
Foilsithe / Cruthaithe: (2015-12-01)

Toward Active-Site Compression in Rigid-Rod ?-Barrels
de réir: Yoann Baudry, et al.
Foilsithe / Cruthaithe: (2004-04-01)

Effect of low temperature baking in nitrogen on the performance of a niobium superconducting radio frequency cavity
de réir: Pashupati Dhakal, et al.
Foilsithe / Cruthaithe: (2018-03-01)

Refining of Tantalum and Niobium
de réir: Choudhury, A.
Foilsithe / Cruthaithe: (1993-01-01)

Post-processing of direct metal deposited AlCrCoCuFeNi HEA using centrifugal barrel finishing
de réir: Modikwe Thembisile, et al.
Foilsithe / Cruthaithe: (2022-01-01)

The Surface Treatment of Niobium Superconducting Reentrant Cavities by Means of High Temperature Nitrogen Plasma Based Ion Implantation
de réir: Rogério Moraes Oliveira, et al.
Foilsithe / Cruthaithe: (2019-12-01)

Effects of processing history on the evolution of surface damage layer and dislocation substructure in large grain niobium cavities
de réir: D. Kang, et al.
Foilsithe / Cruthaithe: (2015-12-01)

Surface characterization of nitrogen-doped high purity niobium coupons compared with superconducting rf cavity performance
de réir: Pashupati Dhakal, et al.
Foilsithe / Cruthaithe: (2019-12-01)

Measurement of the high-field Q drop in the TM_{010} and TE_{011} modes in a niobium cavity
de réir: Gianluigi Ciovati, et al.
Foilsithe / Cruthaithe: (2006-04-01)

3.5-cell large grain niobium superconducting cavity for a dc superconducting rf photoinjector
de réir: Shengwen Quan, et al.
Foilsithe / Cruthaithe: (2010-04-01)

Modeling and simulation of bullet-barrel interaction process for the damaged gun barrel
de réir: Chao Shen, et al.
Foilsithe / Cruthaithe: (2019-12-01)

Two different origins of the Q-slope problem in superconducting niobium film cavities for a heavy ion accelerator at CERN
de réir: A. Miyazaki, et al.
Foilsithe / Cruthaithe: (2019-07-01)

Measurement of the high-field Q drop in a high-purity large-grain niobium cavity for different oxidation processes
de réir: G. Ciovati, et al.
Foilsithe / Cruthaithe: (2007-06-01)

Cavity-Integrated Ultra-Narrow Superconducting Nanowire Single-Photon Detector Based on a Thick Niobium Nitride Film
de réir: Marsili, Francesco, et al.
Foilsithe / Cruthaithe: (2014)

Effect of high temperature heat treatments on the quality factor of a large-grain superconducting radio-frequency niobium cavity
de réir: P. Dhakal, et al.
Foilsithe / Cruthaithe: (2013-04-01)

Effort towards symmetric removal and surface smoothening of 1.3-GHz niobium single-cell cavity in vertical electropolishing using a unique cathode
de réir: Vijay Chouhan, et al.
Foilsithe / Cruthaithe: (2017-08-01)

Modelling the emergence of whisker barrels
de réir: Sebastian S James, et al.
Foilsithe / Cruthaithe: (2020-09-01)