Strategic placement of viscous dampers for seismic structural design

Strategic placement of viscous dampers for seismic structural design

<p>Seismic design with viscous devices is an effective means of dissipating seismic energy and protecting the main structural system from permanent damage. Despite numerous damper placement methods available, there lacks consensus on the best method, thus leaving design engineers without recom...

Descripció completa

Dades bibliogràfiques
Autor principal:	Whittle, J
Altres autors:	Williams, M
Format:	Thesis
Idioma:	English
Publicat:	2011
Matèries:	Engineering & allied sciences

Ítems similars

A Comparison of Viscous Damper Placement Methods for Improving Seismic Building Design
per: Whittle, J, et al.
Publicat: (2012)

Preliminary study of optimal placement of viscous dampers in buildings
per: Whittle, J, et al.
Publicat: (2010)

Placement of fluid viscous dampers to reduce total-building seismic damage
per: Del-Gobbo, G
Publicat: (2017)

On the size effects and scale transitions in the strength and failure of materials and structures
per: Korsunsky, A
Publicat: (2009)

Design and performance of a centimetre-scale shrouded wind turbine for energy harvesting
per: Howey, D, et al.
Publicat: (2011)

Finite element seismic analysis of guyed masts
per: Grey, M, et al.
Publicat: (2006)

Seismic analysis of knee elements for steel frames
per: Clément, D, et al.
Publicat: (2002)

Aspects of structural design with glass
per: Porter, M, et al.
Publicat: (2001)

The character of dislocation structure evolution in nanocrystalline FCC Ni-Co alloys prepared by high-energy mechanical milling
per: Salimon, A, et al.
Publicat: (1999)

Optimal design of viscous damper in buildings
per: Kiew, Kim Mei.
Publicat: (2011)

Assessment of design procedures for structural glass beams
per: Crompton, P, et al.
Publicat: (1999)

Comparing fluid viscous damper placement methods considering total-building seismic performance
per: Del Gobbo, G, et al.
Publicat: (2018)

Structured prediction by joint kernel support estimation
per: Lampert, C, et al.
Publicat: (2009)

Optimal design of fluid viscous dampers for buildings
per: Chaw, Suu Hlaing.
Publicat: (2011)

Analysis of cohesive zones in cracks and slip bands using hypersingular interpolative quadratures
per: Korsunsky, A, et al.
Publicat: (2000)

The influence of coating cracking and debonding on the hardness of coated systems
per: Tuck, J, et al.
Publicat: (2000)

The theory of advanced multi-layer thin film heat transfer gauges
per: Doorly, J, et al.
Publicat: (1987)

Analysis of residual stresses around 'dimpled' cold-expanded holes in aluminum alloy plates
per: Zhang, S, et al.
Publicat: (2008)

A review of domain modelling and domain imaging techniques in ferroelectric crystals
per: Potnis, P, et al.
Publicat: (2011)

Seismic risk-based optimal design of fluid viscous dampers for seismically excited nonlinear structures
per: Mohtasham Mohebbi, et al.
Publicat: (2021-08-01)

On the application of the work-of-indentation appproach to depth-sensing indentation experiments in coated systems
per: Tuck, J, et al.
Publicat: (2001)

A new mechanochemical method for metal coating
per: Torosyan, A, et al.
Publicat: (2002)

Analysis of the spray field development on a vertical surface during water spray-quenching using a flat spray nozzle
per: Vorster, W, et al.
Publicat: (2009)

Indentation hardness evaluation of cathodic arc deposited thin hard coatings
per: Tuck, J, et al.
Publicat: (2001)

Numerical modelling of real-time sub-structure testing
per: Williams, D
Publicat: (2000)

Neutron diffraction analysis of stresses in an in-plane biaxially-fatigued stainless steel sample of cruciform geometry
per: Taran, Y, et al.
Publicat: (2008)

Design of structural mechanisms
per: Chen, Y, et al.
Publicat: (2003)

Semi-supervised kernel canonical correlation analysis with application to human fMRI
per: Blaschko, M, et al.
Publicat: (2011)

Oxford HEXameter: laboratory high energy X-ray diffractometer for bulk residual stress analysis
per: Korsunsky, A, et al.
Publicat: (2006)

Flow visualisation of the external flow from a converging slot-hole film-cooling geometry
per: Sargison, J, et al.
Publicat: (2005)

Modelling of the hardness of electroplated nickel coatings on copper substrates
per: Tuck, J, et al.
Publicat: (2000)

Residual elastic strain due to laser shock peening: synchrotron diffraction measurement
per: Korsunsky, A, et al.
Publicat: (2006)

Energy calibration and full-pattern refinement for strain analysis using energy-dispersive and monochromatic X-ray diffraction
per: Liu, J, et al.
Publicat: (2005)

Triaxial residual strains in a railway rail measured by neutron diffraction
per: Jun, T, et al.
Publicat: (2009)

Analysis of plastic deformation and residual elastic strain in a titanium alloy using synchrotron x-ray diffraction
per: Golshan, M, et al.
Publicat: (2005)

Neutron diffraction investigation of an in-plane biaxial fatigued stainless steel sample of cruciform geometry
per: Taran, Y, et al.
Publicat: (2008)

High energy transmission micro-beam Laue synchrotron X-ray diffraction
per: Hofmann, F, et al.
Publicat: (2010)

The principle of strain reconstruction tomography: determination of quench strain distribution from diffraction measurements
per: Korsunsky, A, et al.
Publicat: (2006)

Crack tip deformation fields and fatigue crack growth rates in Ti-6Al-4V
per: Korsunsky, A, et al.
Publicat: (2009)

Comparative measurements of the energy consumption of 51 electric, hybrid and internal combustion engine vehicles
per: Howey, D, et al.
Publicat: (2011)