TRANSMISSION ELECTRON-MICROSCOPY STUDY OF TI/SICF COMPOSITES FABRICATED BY VACUUM PLASMA SPRAYING AND VACUUM HOT-PRESSING

TRANSMISSION ELECTRON-MICROSCOPY STUDY OF TI/SICF COMPOSITES FABRICATED BY VACUUM PLASMA SPRAYING AND VACUUM HOT-PRESSING

Dades bibliogràfiques
Autors principals:	Li, J, Grant, P, Jenkins, M, Cantor, B
Format:	Journal article
Publicat:	1995

Ítems similars

FABRICATION OF TI/SICF METAL-MATRIX COMPOSITES BY VACUUM PLASMA SPRAYING
per: Zhao, Y, et al.
Publicat: (1993)

Hydrogen incorporation in Ti-based metal-matrix composites fabricated by vacuum plasma spraying and vacuum hot pressing
per: Li, J, et al.
Publicat: (1997)

The effects of fibre coating, matrix composition and processing conditions on interfacial microstructures in vacuum plasma sprayed and vacuum hot pressed Ti alloy SiCf composites
per: Li, J, et al.
Publicat: (1996)

THE MECHANICAL BEHAVIOUR OF SIC FIBRES IN A TI MATRIX DURING FABRICATION BY VACUUM PLASMA SPRAYING AND VACUUM HOT PRESSING
per: Zhao, Y, et al.
Publicat: (1995)

The response of SiC fibres to vacuum plasma spraying and vacuum hot pressing during the fabrication of titanium matrix composites
per: Baker, A, et al.
Publicat: (1999)

THE MICROSTRUCTURE OF SPRAY-FORMED TI-6AL-4V/SICF METAL-MATRIX COMPOSITES
per: Zhao, Y, et al.
Publicat: (1993)

Modelling and experimental analysis of vacuum plasma spraying. Part II: prediction of temperatures and velocities of plasma gases and Ti particles in a plasma jet
per: Zhao, Y, et al.
Publicat: (2000)

Optimisation of vacuum plasma spraying for composite production
per: Baik, K, et al.
Publicat: (1997)

Modelling for thermal control of vacuum plasma spraying
per: Davis, E, et al.
Publicat: (2005)

Modelling and experimental analysis of vacuum plasma spraying. Part I: prediction of initial plasma properties at plasma gun exit
per: Zhao, Y, et al.
Publicat: (2000)

Fabrication of laminated ZrC-SiC composite by vacuum hot-pressing sintering
per: Yuanyuan Li
Publicat: (2015-03-01)

Influence of Vacuum Chamber Pressure on Microstructure and Properties of Tungsten Target Fabricated by Low Pressure Plasma Spraying
per: WANG Yue-ming, et al.
Publicat: (2018-10-01)

INTERFACE MICROSTRUCTURES IN TI-BASED COMPOSITES USING TIB2/C-COATED AND UNCOATED SICF AFTER SHORT-TERM THERMAL EXPOSURE
per: Li, J, et al.
Publicat: (1994)

Effect of La on microstructures and mechanical properties of Cu/Ti3SiC2/C nanocomposites sintered by vacuum hot-pressing and hot isostatic pressing
per: Lan Lv, et al.
Publicat: (2020-01-01)

Matrix microstructure evolution during the fabrication of SiCf/Ti60 composites
per: Zhicong Gan, et al.
Publicat: (2024-05-01)

Characterization of tantalum coatings deposited using vacuum plasma spray process
per: Mihailo Mrdak, et al.
Publicat: (2018-12-01)

Ultra High Vacuum Transmission Electron Microscopy of Metal/2D Material Contacts
per: Thomsen, Joachim Dahl, et al.
Publicat: (2022)

Perspectives on ultra-high vacuum transmission electron microscopy of dynamic crystal growth phenomena
per: Reidy, Kate, et al.
Publicat: (2024)

Multi-Functional Properties of MWCNT/PVA Buckypapers Fabricated by Vacuum Filtration Combined with Hot Press: Thermal, Electrical and Electromagnetic Shielding
per: Liyang Cao, et al.
Publicat: (2020-12-01)

Repair of Ni-based single-crystal superalloys using vacuum plasma spray
per: T. Kalfhaus, et al.
Publicat: (2019-04-01)

Study on tool steels with ultrahigh carbon and ultrahigh chromium prepared by vacuum hot-pressing
per: QIU Yue, et al.
Publicat: (2021-08-01)

Microstructure and mechanical properties of Fe-ZTA cermet prepared by vacuum hot-pressed sintering
per: Daming Sun, et al.
Publicat: (2020-01-01)

Microstructure and mechanical properties of Cu-ZTA cermet prepared by vacuum hot pressing sintering
per: Da-Ming Sun, et al.
Publicat: (2020-01-01)

Effect of Spray Parameters on Vacuum Cooling of Tofu
per: Peng Yuhang, et al.
Publicat: (2021-01-01)

Effect of hot-pressing temperature on microstructure and properties of Cu–30Ni–5Nb alloys prepared by vacuum hot-pressing method
per: HOU Chen-yang, et al.
Publicat: (2021-10-01)

Use of back-scattered electron imaging for phase identification in vacuum plasma sprayed hydroxyapatite coatings
per: Hambleton, R, et al.
Publicat: (1994)

Mechanical properties and microstructure of molybdenum coating layers deposited vacuum plasma spray process
per: Mihailo Mrdak, et al.
Publicat: (2019-09-01)

Characterization of vacuum plasma spray VPS - W coating deposited on stainless steel substrates
per: Darko Veljić, et al.
Publicat: (2021-06-01)

Microstructure and mechanical properties of Cu–Fe-ZTA cermets prepared by vacuum hot pressing sintering
per: Qi Gao, et al.
Publicat: (2022-09-01)

Compression of amorphous solid dispersions prepared by hot-melt extrusion, spray drying and vacuum drum drying
per: Barbara V. Schönfeld, et al.
Publicat: (2021-12-01)

Fibre re-arrangement and matrix softening phenomena in matrix-coated fibre (MCF) composites during vacuum hot pressing consolidation
per: Peng, H, et al.
Publicat: (2003)

SPRAY PROCESSING OF TI METAL MATRIX COMPOSITES
per: Grant, P, et al.
Publicat: (1995)

Finite Element Simulation of Hot Nanoindentation in Vacuum
per: Lee, Hunken, et al.
Publicat: (2016)

Microstructure evolution of vacuum plasma sprayed CoNiCrAlY coatings after heat treatment and isothermal oxidation
per: Poza, P, et al.
Publicat: (2006)

Experimental investigation of the characteristic of vacuum spray cooling for tofu
per: Gailian Li, et al.
Publicat: (2023-07-01)

Effect of Vacuum Hot-Press Process on the Sintered Characteristics and Mechanical Properties of a High-Density Cr-31.2 Mass% Ti Alloy
per: Shih-Hsien Chang, et al.
Publicat: (2018-12-01)

Effects of Multi-Phase Reinforcements on Microstructures, Mechanical and Tribological Properties of Cu/Ti3SiC2/C/BN/GNPs Nanocomposites Sintered by Vacuum Hot-Pressing and Hot Isostatic Pressing
per: Zhenyi Shao, et al.
Publicat: (2016-12-01)

Microstructural heterogeneity and property variations in cast and vacuum hot-pressed CoCrPtB alloy
per: Li, Yan, et al.
Publicat: (2024)

Design and fabrication of a vacuum forming machine: to design and fabricate a vacuum forming machine for forming dental aligners
per: Chia, Andrew Weizhi
Publicat: (2016)

Fabrication of micro-/nano-structured superhydrophobic ceramic coating with reversible wettability via a novel solution precursor vacuum plasma spray process
per: Pengyun Xu, et al.
Publicat: (2018-12-01)