IP BPM position error at CLIC due to secondary emission from beam-beam BACKGROUNDS

IP BPM position error at CLIC due to secondary emission from beam-beam BACKGROUNDS

Beam-beam background impacts on the IP BPM are studied for the CLIC machine. The large number of coherent pairs (1.8 × 108 charges per BPM strip per bunch crossing) for the CLIC-G default parameter set, potentially leads to a large secondary emission in the BPM strips. Detailed GuineaPig++ and Geant...

Full description

Bibliographic Details
Main Authors:	Hartin, A, Clarke, C, Swinson, C, Burrows, P, Christian, G, Constance, B, Apsimon, R, Khah, H, Perry, C, Kalinin, A
Format:	Conference item
Published:	European Physical Society Accelerator Group (EPS-AG) 2008

Similar Items

Simulation of ILC feedback BPM signals in an intense background environment
by: Hartin, A, et al.
Published: (2007)

Simulation of ILC feedback BPM signals in an intense background environment
by: Hartin, A, et al.
Published: (2007)

Development of fast micron-resolution beam position monitors for linear collider beam-based feedback systems
by: Apsimon, R, et al.
Published: (2008)

Development of Fast Micron-Resolution Beam Position Monitors for Linear Collider Beam-Based Feedback Systems
by: Apsimon, R, et al.
Published: (2009)

Latest beam test results of the FONT4 ILC intra-train feedback system prototype
by: Burrows, P, et al.
Published: (2008)

The FONT4 ILC intra-train beam-based digital feedback system prototype
by: Burrows, P, et al.
Published: (2007)

The FONT4 ILC intra-train beam-based digital feedback system prototype
by: Burrows, P, et al.
Published: (2007)

Intra-beam IP feedback studies for the 380 GeV CLIC beam delivery system
by: Bodenstein, R, et al.
Published: (2016)

The electromagnetic background environment for the Interaction-Point beam feedback system at the International Linear Collider
by: Christian, G, et al.
Published: (2006)

Latest beam test results from ATF2 with the font ILC prototype intra-train beam feedback systems
by: Apsimon, R, et al.
Published: (2010)

Development of a fast, single-pass, micron-resolution beam position monitor signal processor: Beam test results from ATF2
by: Apsimon, R, et al.
Published: (2010)

Electromagnetic background tests for the ILC interaction-point feedback system
by: Burrows, P, et al.
Published: (2007)

Electromagnetic background tests for the ILC interaction-point feedback system
by: Burrows, P, et al.
Published: (2007)

Nanosecond-latency sub-micron resolution stripline beam position monitor signal processor for CLIC
by: Ramjiawan, RL, et al.
Published: (2019)

The beam-based intra-train feedback system of CLIC
by: Resta-López, J, et al.
Published: (2010)

Design and performance of a prototype digital feedback system for the international linear collider interaction point
by: Apsimon, R, et al.
Published: (2008)

Simulation of phase stability at the flat top of the clic drive beam
by: Gerbershagen, A, et al.
Published: (2011)

CLIC drive beam phase stabilisation
by: Gerbershagen, A
Published: (2013)

Challenges and status of tuning simulations for CLIC traditional beam delivery system
by: Bodenstein, R, et al.
Published: (2018)

Design of the ILC prototype FONT4 digital intra-train beam-based feedback system
by: Burrows, P, et al.
Published: (2006)

Performance of the FONT3 fast analogue intra-train beam-based feedback system at ATF
by: Burrows, P, et al.
Published: (2006)

Tests of the FONT3 linear collider intra-train beam feedback system at the ATF
by: Burrows, P, et al.
Published: (2005)

Investigation of rib optical waveguide using beam propagation method (BPM) /
by: 288933 Mohamad Nazib Adon, et al.
Published: (2001)

Comparison of the TESLA, NLC and CLIC beam-collimation system performance
by: Drozhdin, A, et al.
Published: (2003)

Comparison of the TESLA, NLC and CLIC beam-collimation system performance
by: Drozhdin, A, et al.
Published: (2003)

Luminosity loss due to beam distortion and the beam-beam instability
by: Wu, J, et al.
Published: (2005)

Online optimisation of the CLIC drive beam bunch train recombination at CTF3
by: Gamba, D
Published: (2016)

Luminosity loss due to beam distortion and the beam-beam instability
by: Wu, J, et al.
Published: (2005)

Development of a high-resolution, broad-band, stripline beam position monitoring system
by: Bett, DR, et al.
Published: (2013)

Latest performance results from the font 5 intra train beam position feedback system at ATF
by: Burrows, P, et al.
Published: (2013)

Measurements of stray magnetic fields at CERN for CLIC
by: Gohil, C, et al.
Published: (2019)

Design and operation of a prototype interaction point beam collision feedback system for the International Linear Collider
by: Apsimon, RJ, et al.
Published: (2018)

Design and initial results of a turn-by-turn beam position monitoring system for multiple bunch operation of the ATF damping ring
by: Christian, G, et al.
Published: (2011)

Development of a beam-based phase feedforward demonstration at the CLIC test facility (CTF3)
by: Roberts, J
Published: (2016)

Latest performance results from the font5 intra-train beam position and angle feedbacksystem at ATF2
by: Bett, DR, et al.
Published: (2012)

A low-latency sub-micron resolution stripline beam position monitoring system for single-pass beamlines
by: Burrows, P, et al.
Published: (2012)

Development of a turn-by-turn beam position monitoring system for multiple bunch operation of the atf damping ring
by: Burrows, P, et al.
Published: (2012)

Optimisation of the CLIC baseline collimation system
by: Resta-López, J, et al.
Published: (2010)

The Compact Linear e+e− Collider (CLIC): Accelerator and Detector
by: Burrows, P
Published: (2018)

Mitigation of stray magnetic field effects in CLIC with passive shielding
by: Gohil, C, et al.
Published: (2019)