Residual chlorine prevents full densification of flash sintered yttria-stabilized zirconia ceramics

Residual chlorine prevents full densification of flash sintered yttria-stabilized zirconia ceramics

The densification of yttria-stabilized zirconia (YSZ) during flash sintering is strongly dependent on the amount of residual chlorine in the sintered bodies. The residual chlorine, present as a remnant from powder synthesis, hinders densification after it is trapped and vaporized in the rapidly clos...

Full description

Bibliographic Details
Main Authors:	Prajzler, V, Maca, K, Todd, R
Format:	Journal article
Language:	English
Published:	Elsevier 2024

Similar Items

Abnormal grain growth in DC flash sintered 3‐mol% yttria‐stabilized zirconia ceramics
by: Prajzler, V, et al.
Published: (2022)

Effect of additives on sintering and conductivity of yttria-stabilized zirconia
by: Song, Xiaochao
Published: (2016)

Study of deformation mechanisms in flash-sintered yttria-stabilized zirconia by in-situ micromechanical testing at elevated temperatures
by: Jaehun Cho, et al.
Published: (2019-05-01)

Densification studies of silicon carbide-based ceramics with yttria, silica and alumina as sintering additives
by: J. Marchi, et al.
Published: (2001-10-01)

Nd₂O₃ DOPED YTTRIA STABILIZED ZIRCONIA CERAMICS FABRICATED BY CONVENTIONAL AND MICROWAVE SINTERING METHODS
by: A. Muthuchamy, et al.
Published: (2019-01-01)

Densification behavior of yttria-stabilized zirconia powders for solid oxide fuel cell electrolytes
by: Dhruba Panthi, et al.
Published: (2018-11-01)

In vitro evaluation of tooth-colored yttria stabilized zirconia ceramics
by: Melis Kaplan Akarsu, et al.
Published: (2021-10-01)

Effect of sintering holding time on low-temperature degradation of yttria stabilised zirconia ceramics
by: Sutharsini, U., et al.
Published: (2014)

Catalytic properties, densification and mechanical properties of nanocrystalline yttria-zirconia-based materials
by: Cui, Jianyi
Published: (2008)

Molybdenum Oxide and Nickel Nitrate as Cooperative Sintering Aids for Yttria-Stabilized Zirconia
by: Clay Hunt, et al.
Published: (2020-06-01)

Effects of Sintering Temperature and Yttria Content on Microstructure, Phase Balance, Fracture Surface Morphology, and Strength of Yttria-Stabilized Zirconia
by: Volodymyr Kulyk, et al.
Published: (2022-11-01)

The Effect of Sintering Temperature on the Phase Composition, Microstructure, and Mechanical Properties of Yttria-Stabilized Zirconia
by: Volodymyr Kulyk, et al.
Published: (2022-04-01)

Yttria-stabilized tetragonal zirconia prepared using gel casting and two-stage sintering
by: Jing-Siang Jhan, et al.
Published: (2023-01-01)

FREE AND CONSTRAINED SINTERING OF 3-MOL % YTTRIA STABILISED ZIRCONIA
by: LUZ STELLA ARIAS-MAYA
Published: (2014-01-01)

Pressureless flash sintering of α-SiC: electrical characteristics and densification
by: Gibson, A, et al.
Published: (2022)

Hybrid microwave sintering of Zirconia Toughened Alumina in a multimode cavity – Influence of the content of 3 mol% yttria stabilized zirconia and sintering configurations
by: Nouhaila Khalile, et al.
Published: (2023-06-01)

Fracture toughness enhancement of yttria-stabilized tetragonal zirconia polycrystalline ceramics through magnesia-partially stabilized zirconia addition
by: Bilal Soylemez, et al.
Published: (2020-12-01)

Effects of various surface treatments on the biaxial flexural properties of yttria-stabilized zirconia ceramics
by: Teerthesh Jain, et al.
Published: (2018-01-01)

Microwave Complex Permittivity of Yttria-Stabilized Zirconia
by: Anna Case, et al.
Published: (2023-01-01)

Adsorption of Aliphatic Alcohols on Yttria-Stabilized Zirconia
by: I. Faeza, et al.
Published: (2005-03-01)

Synthesis of Nanocrystalline Yttria Stabilized Zirconia for SOFC
by: Mridula Biswas, et al.
Published: (2011-12-01)

The Effect of Yttria Content on Microstructure, Strength, and Fracture Behavior of Yttria-Stabilized Zirconia
by: Volodymyr Kulyk, et al.
Published: (2022-07-01)

Synthesis and characterization of ceria and yttria co-doped zirconia ceramics
by: Chew, Jonathan You Jie
Published: (2019)

Controlling factors in flash sintering of ceramics
by: Todd, R, et al.
Published: (2020)

Comment on “Flash in argon atmosphere yields electronically conducting yttria-stabilized zirconia at ambient temperature” by Jo et al., J Am Ceram Soc. 2023;106:5133–5139
by: Bechteler, C, et al.
Published: (2023)

Evaluation of the Effect of High-Speed Sintering and Specimen Thickness on the Properties of 5 mol% Yttria-Stabilized Dental Zirconia Sintered Bodies
by: Kazumichi Nonaka, et al.
Published: (2022-08-01)

Fabrication, microstructure, and properties of 8 mol% yttria-stabilized zirconia (8YSZ) transparent ceramics
by: Penghui Chen, et al.
Published: (2022-07-01)

Effect of Yttria Content on the Translucency and Masking Ability of Yttria-Stabilized Tetragonal Zirconia Polycrystal
by: Young-Eun Cho, et al.
Published: (2020-10-01)

Mechanical and thermal properties of porous yttria-stabilized zirconia
by: Taro Shimonosono, et al.
Published: (2019-01-01)

Morphological study of yttria-stabilized zirconia hollow fibre membrane prepared using phase inversion/sintering technique
by: Paiman, S. H., et al.
Published: (2015)

Platform to develop exhaust gas sensors manufactured by glass-solder-supported joining of sintered yttria-stabilized zirconia
by: F. Schubert, et al.
Published: (2016-01-01)

Comparative evaluation of spark plasma (SPS), microwave (MWS),two stage sintering (TSS) and conventional sintering (CRH) on the densification and micro structural evolution of fully stabilized zirconia ceramics
by: Rajeswari K., et al.
Published: (2010-01-01)

Effects of sintering profile on the densification behaviour of forsterite ceramics
by: Ramesh, S., et al.
Published: (2015)

On the current percolation-induced hot-spot issue during flash sintering: The case of 8 mol% yttria-stabilized zirconia and Gd2Zr2O7 composites
by: Yue Cao, et al.
Published: (2022-12-01)

As-Sintered Manganese-Stabilized Zirconia Ceramics with Excellent Electrical Conductivity
by: Ling Gao, et al.
Published: (2022-04-01)

Rheological and mechanical properties of Yttria Stabilized Zirconia (YSZ) produced by ceramic injection moulding / Mahfuzah Zainudin
by: Zainudin, Mahfuzah
Published: (2017)

Development of zirconia-based ceramics stabilized with different yttria contents shaped by extrusion 3D-printing
by: Patrick de Lima Gomes, et al.
Published: (2024-01-01)

Defect chemistry to trigger zirconia densification at low temperatures by Spark Plasma Sintering
by: E. Martin, et al.
Published: (2024-03-01)

Effects of Sintering Temperature and Finishing Procedure on Surface Roughness of Different Yttria Content Zirconia
by: Canan Dogdu, et al.
Published: (2022-01-01)

Phenomena Occurring upon the Sintering of a Mixture of Yttria–Zirconia Nanometric Powder and Sub-Micrometric Pure Zirconia Powder
by: Kamil Wojteczko, et al.
Published: (2021-11-01)