| Summary: | <p>This thesis studies the optimal control of vehicular systems, focusing on the solution of minimum-lap-time problems for a Formula 1 car. The basic optimal control theory is summarised as an infinite-dimensional extension of optimisation theory. The relevant numerical techniques for optimisation and integral approximation are compared in view of the application to vehicle systems.</p> <p>The classical brachistochrone problem is revisited from an optimal control perspective, with two vehicle-relevant generalisations. Closed-form solutions are derived for both the optimal trajectory and transit time. Problems involving a steerable disc rolling on the interior surface of a hemisphere are studied. For three-dimensional problems of this type, which involve rolling bodies and nonholonomic constraints, numerical solutions are used.</p> <p>The identification of 3D race track models from measured GPS data is treated as a problem in the differential geometry of curves and surfaces. Curvilinear coordinates are adopted to facilitate optimal control solutions. The track is specified in terms of three displacement-dependent curvatures and two edge variables. The differential model is smoothed using numerical optimal control techniques. The Barcelona track is considered as an illustrative example.</p> <p>The minimum-lap-time problem for a Formula 1 car on a flat track is solved using direct transcription. The driven line and multiple car setup parameters are optimised simultaneously. It is shown that significant lap-time reductions can be obtained from track-specific setup parameter optimisation. Reduced computing times are achieved using a combination of analytical derivatives, model non-dimensionalisation and problem scaling.</p> <p>The optimal control of the car on a 3D track is studied; the results are compared with flat-track solutions. Contemporary kinetic energy-recovery systems are studied and compared with future hybrid kinetic-thermal energy-recovery systems. It is demonstrated that these systems can produce contemporary lap time using approximately two-thirds of the fuel required by present-day vehicles.</p>
|
|---|