Ultra-high speed particle image velocimetry on drop-on-demand jetting
An experimental setup to study the dynamics of droplet jetting from a commercially available print-head is described. A MicroFab print-head with an 80 μm diameter transparent nozzle was set to print droplets at a speed of 5 m/s at a frequency of 7 kHz. A Particle Image Velocimetry (PIV) scheme consi...
| Main Authors: | , , , , , |
|---|---|
| Format: | Journal article |
| Language: | English |
| Published: |
2011
|
| Summary: | An experimental setup to study the dynamics of droplet jetting from a commercially available print-head is described. A MicroFab print-head with an 80 μm diameter transparent nozzle was set to print droplets at a speed of 5 m/s at a frequency of 7 kHz. A Particle Image Velocimetry (PIV) scheme consisting of an optical microscope coupled to an ultra-high speed camera is utilized to capture the motion of particles suspended in a model transparent ink. This experimental arrangement images the flow at the centre of a glass cylindrical nozzle and above the fluid meniscus at a speed of half a million frames per second. Velocity fields are obtained from an approximately 200 μm thickness layer of fluid at the inside of the nozzle. Experimental results are compared with Lagrangian finite-element numerical simulations under identical fluid and jetting conditions with good agreement. The advantages, challenges and current limitations of this approach are discussed. ©2011 Society for Imaging Science and Technology. |
|---|