Effects of coolant density, specific heat capacity, and biot number on turbine vane cooling effectiveness

Effects of coolant density, specific heat capacity, and biot number on turbine vane cooling effectiveness

This paper describes the effects of coolant-to-mainstream density ratio and specific heat capacity flux ratio (the product of blowing ratio and specific heat capacity ratio) on the overall cooling effectiveness of high pressure (HP) turbine vanes. Experimental measurements have been conducted at cor...

Mô tả đầy đủ

Chi tiết về thư mục
Những tác giả chính:	Luque, S, Jones, TV, Povey, T
Định dạng:	Journal article
Được phát hành:	American Society of Mechanical Engineers 2017

Những quyển sách tương tự

Full thermal experimental assessment of a dendritic turbine vane cooling scheme
Bằng: Luque, S, et al.
Được phát hành: (2013)

Full Thermal Experimental Assessment of a Dendritic Turbine Vane Cooling Scheme
Bằng: Luque, S, et al.
Được phát hành: (2013)

Effect of Film Cooling on Turbine Capacity
Bằng: Povey, T
Được phát hành: (2010)

The Effects of Mainstream Reynolds Number and Blowing Ratio on Film Cooling of Gas Turbine Vanes
Bằng: Germán Sierra-Vargas, et al.
Được phát hành: (2023-09-01)

Heat transfer characteristic of a fully cooled turbine vane
Bằng: Chun-yi Yao, et al.
Được phát hành: (2021-12-01)

Understanding of temperature and cooling effectiveness sensitivity of a film-cooled vane under coolant inlet temperature effect: A case study
Bằng: Prasert Prapamonthon, et al.
Được phát hành: (2019-09-01)

Scaling of turbine metal temperatures in cooled compressible flows-experimental demonstration of a new theory
Bằng: Luque, S, et al.
Được phát hành: (2017)

A Novel Technique for Assessing Turbine Cooling System Performance
Bằng: Luque, S, et al.
Được phát hành: (2011)

Heat transfer measurements on an intermediate-pressure nozzle guide vane tested in a rotating annular turbine facility, and the modifying effects of a non-uniform inlet temperature profile
Bằng: Povey, T, et al.
Được phát hành: (2003)

Effect of profiled endwall on nozzle guide vane with coolant purge flow
Bằng: Jeongwon Lee, et al.
Được phát hành: (2024-10-01)

Influence of the Slot Fillet and Vane Root Fillet on the Turbine Vane Endwall Cooling Performance
Bằng: Kun Du, et al.
Được phát hành: (2023-07-01)

Multidisciplinary Automation in Design of Turbine Vane Cooling Channels
Bằng: Sanjay Nambiar, et al.
Được phát hành: (2024-02-01)

Large eddy simulation of film cooling on turbine vane
Bằng: Fangsu FAN, et al.
Được phát hành: (2019-07-01)

Heat transfer characteristics of an impingement plate used in a turbine vane cooling system
Bằng: Son, C, et al.
Được phát hành: (2001)

The effect of hot-streaks on HP vane surface and endwall heat transfer: An experimental and numerical study
Bằng: Povey, T, et al.
Được phát hành: (2007)

A NOVEL TECHNIQUE FOR ASSESSING TURBINE COOLING SYSTEM PERFORMANCE
Bằng: Luque, S, et al.
Được phát hành: (2009)

Effect of Vane Thermal Emission Cooling on the Efficiency of the Gas Turbine Power Plant
Bằng: Kolychev A.V., et al.
Được phát hành: (2020-12-01)

The usage of the Trefftz method to determine the Biot number
Bằng: Artur Maciąg, et al.
Được phát hành: (2017-12-01)

The effect of hot-streaks on HP vane surface and endwall heat transfer: An experimental and numerical study
Bằng: Povey, T, et al.
Được phát hành: (2005)

Experimental and numerical analysis of loss characteristics of cooled transonic nozzle guide vanes
Bằng: Povey, T, et al.
Được phát hành: (2022)

Transonic turbine vane tests in a new miniature cascade facility
Bằng: Povey, T, et al.
Được phát hành: (2008)

Experimental and computational study of the effect of momentum-flux ratio on high-pressure nozzle guide vane endwall cooling systems
Bằng: Ornano, F, et al.
Được phát hành: (2017)

Aerothermal measurements and predictions of an intermediate turbine duct turning vane
Bằng: Johansson, M, et al.
Được phát hành: (2015)

An investigation of the effects of nozzle guide vane trailing edge cooling on rotor heat transfer in a transonic turbine stage
Bằng: Gleixner, Aaron J. (Aaron James)
Được phát hành: (2008)

Understanding capacity sensitivity of cooled transonic nozzle guide vanes: a parametric experimental and computational study of the impact of trailing edge geometry
Bằng: Burdett, D, et al.
Được phát hành: (2021)

Cooling optimization theory - Part I: Optimum wall temperature, coolant exit temperature, and the effect of wall/film properties on performance
Bằng: Kirollos, B, et al.
Được phát hành: (2016)

Experimental study of cooling air effect on overall cooling of laminated configuration at a turbine vane end-wall
Bằng: Jian Pu, et al.
Được phát hành: (2022-04-01)

Conjugate Heat Transfer Investigation on Swirl-Film Cooling at the Leading Edge of a Gas Turbine Vane
Bằng: Haifen Du, et al.
Được phát hành: (2019-10-01)

Gas turbine vane film cooling for engine-realistic combustor flows
Bằng: Saw, JJH
Được phát hành: (2023)

The film cooling performance of spiral-channel holes on turbine guide vane
Bằng: Yuhao Jia, et al.
Được phát hành: (2024-01-01)

Uncertainty Quantification of Film Cooling Performance of an Industrial Gas Turbine Vane
Bằng: Andrea Gamannossi, et al.
Được phát hành: (2019-12-01)

Film cooling modeling of a turbine vane with multiple configurations of holes
Bằng: J.H. Liu, et al.
Được phát hành: (2018-03-01)

Mitigation of Turbine Vane Shock Waves Through Trailing Edge Cooling
Bằng: Cakir Bora O., et al.
Được phát hành: (2018-01-01)

Effects of Gas Thermophysical Properties on the Full-Range Endwall Film Cooling of a Turbine Vane
Bằng: Jian Liu, et al.
Được phát hành: (2023-06-01)

Experimental Study on Overall Cooling Effectiveness of Turbine Nozzle Guide Vane with Impingement-Cutback Structure
Bằng: H. B. He, et al.
Được phát hành: (2022-11-01)

The Effect of Hot Streaks on a High Pressure Turbine Vane Cascade with Showerhead Film Cooling
Bằng: Giovanna Barigozzi, et al.
Được phát hành: (2017-09-01)

Heat transfer and aerodynamics of an intermediate pressure nozzle guide vane with and without inlet temperature non-uniformity
Bằng: Chana, K, et al.
Được phát hành: (2003)

Effect of low-NO X combustor swirl clocking on intermediate turbine duct vane aerodynamics with an upstream high pressure turbine stage — An experimental and computational study
Bằng: Johansson, M, et al.
Được phát hành: (2016)

Impact of trailing edge overhang length on the loss characteristics of fully cooled transonic nozzle guide vanes
Bằng: Burdett, D, et al.
Được phát hành: (2022)

The effects of manufacturing variability on turbine vane performance
Bằng: Duffner, John D
Được phát hành: (2009)