Investigation of friction and wear characteristics of palm biodiesel

Investigation of friction and wear characteristics of palm biodiesel

Use of biodiesel in automobile engine is creating tribology related new challenges. The present study aims to assess the friction and wear characteristics of palm biodiesel at different concentration level by using four-ball wear machine. The investigated fuels were biodiesel (B100), diesel (B0) and...

Full description

Bibliographic Details
Main Authors:	Fazal, M.A., Haseeb, A.S. Md. Abdul, Masjuki, Haji Hassan
Format:	Article
Published:	Elsevier 2013
Subjects:	TA Engineering (General). Civil engineering (General)

Similar Items

Friction and wear characteristics of Calophyllum inophyllum biodiesel
by: Habibullah, M., et al.
Published: (2015)

Comparative corrosive characteristics of petroleum diesel and palm biodiesel for automotive materials
by: Fazal, M.A., et al.
Published: (2010)

Corrosion characteristics of copper and leaded bronze in palm biodiesel
by: Haseeb, A.S. Md. Abdul, et al.
Published: (2010)

Corrosion mechanism of copper in palm biodiesel
by: Fazal, M.A., et al.
Published: (2013)

Degradation of automotive materials in palm biodiesel
by: Fazal, M.A., et al.
Published: (2012)

Compatibility of elastomers in palm biodiesel
by: Haseeb, A.S. Md. Abdul, et al.
Published: (2010)

Effect of different corrosion inhibitors on the corrosion of cast iron in palm biodiesel
by: Fazal, M.A., et al.
Published: (2011)

Effect of temperature on the corrosion behavior of mild steel upon exposure to palm biodiesel
by: Fazal, M.A., et al.
Published: (2011)

Effect of temperature on tribological properties of palm biodiesel
by: Haseeb, A.S. Md. Abdul, et al.
Published: (2010)

Degradation of physical properties of different elastomers upon exposure to palm biodiesel
by: Haseeb, A.S. Md. Abdul, et al.
Published: (2011)

Friction and wear characteristics of electrodeposited nanocrystalline nickel-tungsten alloy films
by: Haseeb, A.S. Md. Abdul, et al.
Published: (2008)

Influence of copper and mild steel on stability of palm biodiesel
by: Jakeria, M.R., et al.
Published: (2013)

The Wear Behavior of Cross-Linked UHMWPE under Dry and Bovine Calf Serum–Lubricated Conditions
by: Liza, S., et al.
Published: (2013)

Investigation of Engine Emission with Diesel-Palm Biodiesel-Antioxidant Blend
by: Choi, C.M., et al.
Published: (2017)

Corrosion of phosphorus bronze in different biodiesel blends and its remedial measures
by: Fazal, M.A., et al.
Published: (2016)

Corrosion of phosphorus bronze in different biodiesel blends and its remedial measures
by: Fazal, M.A., et al.
Published: (2016)

Adhesion and wear behavior of nanostructured titanium oxide thin films
by: Hasan, M.M., et al.
Published: (2010)

Investigation of wear performance of friction stir processed aluminium metal matrix composites
by: Che Dini Marini, Che Mohammad Ishkandar El-Rahimin, et al.
Published: (2020)

Fretting wear of metallic multilayer films
by: Haseeb, A.S. Md. Abdul, et al.
Published: (2003)

Wear failure of a leaded bronze bearing: correlation between plant experience and laboratory wear test data
by: Ahsan, Q., et al.
Published: (2003)

Investigation on particulate emissions and combustion characteristics of a common-rail diesel engine fueled with Moringa oleifera biodiesel-diesel blends
by: Teoh, Yew Heng, et al.
Published: (2019)

Retardation of oxidation and material degradation in biodiesel: a review
by: Sazzad, B.S., et al.
Published: (2016)

Investigation of inclusion casting, sand blasting and embossing methods to prepare engine cylinder bore surface for frictional and wear improvement
by: Kong, Chung Hwa
Published: (2021)

Development of a compression test device for investigating interaction between diffusion of biodiesel and large deformation in rubber
by: Chai, A.B., et al.
Published: (2011)

Failure analysis of retrieved UHMWPE tibial insert in total knee replacement
by: Liza, S., et al.
Published: (2011)

Structural and mechanical properties of nanostructured TiO2 thin films deposited by RF sputtering
by: Haseeb, A.S. Md. Abdul, et al.
Published: (2010)

Response of Ti-6Al-4V and Ti-24Al-11Nb alloys to dry sliding wear against hardened steel
by: Alam, Md. Ohidul, et al.
Published: (2002)

Study of the wear behaviour of Al–4.5% Cu–3.4% Fe in situ composite: Effect of thermal and mechanical processing
by: Ahmed, Shafaat, et al.
Published: (2007)

Emission characteristics of using different alternative fuels with petroleum diesel in a compression ignition (ci) engine
by: Liaquat, A.M., et al.
Published: (2010)

Environmental aspects and challenges of oilseed produced biodiesel in Southeast Asia
by: Jayed, M.H., et al.
Published: (2009)

Die attach properties of Zn-Al-Mg-Ga based high-temperature lead-free solder on Cu lead-frame
by: Haque, A., et al.
Published: (2012)

Tailoring fuel properties using jatropha, palm and coconut biodiesel to improve CI engine performance and emission characteristics
by: Iqbal, Md. Arbab, et al.
Published: (2015)

Evaluation of n-butanol as an oxygenated additive to improve combustion-emission-performance characteristics of a diesel engine fuelled with a diesel-calophyllum inophyllum biodiesel blend
by: Imtenan, S., et al.
Published: (2015)

Influence of copper on the instability and corrosiveness of palm biodiesel and its blends: An assessment on biodiesel sustainability
by: Fazal, M.A., et al.
Published: (2018)

Wear characteristics of PCBN tools in ultra-precision machining of stainless steel at low cutting speeds
by: Liew, Willey Yun Hsien, et al.
Published: (2003)

Performance investigation of domestic refrigerator using pure hydrocarbons and blends of hydrocarbons as refrigerants
by: Sattar, M.A., et al.
Published: (2007)

Effect of antioxidants on the stability and corrosiveness of palm biodiesel upon exposure of different metals
by: Fazal, M.A., et al.
Published: (2017)

Effect of using anti-wear and friction modifier-based additives on tribological performance of engine lubricants
by: Arman, Salih, et al.
Published: (2022)

Experimental investigation on the performance of domestic refrigerator using isobutane and mixture of propane, butane and isobutene
by: Sattar, M.A., et al.
Published: (2008)

Intermixing of metal oxide/Ag/metal oxide nanoscale multilayers prepared by rf reactive magnetron sputtering
by: Hasan, M.M., et al.
Published: (2011)