Pressureless sintering of electro-conductive zirconia composites

Pressureless sintering of electro-conductive zirconia composites

In the present work, 3 mol Yttria-stabilized tetragonal zirconia (Y-TZP) composite containing 25 wt. of zirconium diboride (ZrB2) was prepared via pressureless sintering method in an inert atmosphere over the temperature range of 1350-1550 degrees C for one hour. The effect of zirconium diboride con...

Full description

Bibliographic Details
Main Authors:	Amiriyan, M., Singh, R., Sopyan, I., Satgunam, M., Tolouei, R., Dung, T.W.
Format:	Book
Published:	Engineering 2011
Subjects:	TS Manufactures

Similar Items

Pressureless sintering of electro-conductive zirconia composites
by: Amiriyan, Mahdi, et al.
Published: (2011)

Dependence of the fracture toughness on the sintering time of dense hydroxyapatite bioceramics
by: Tolouei, R., et al.
Published: (2011)

Sinterability and mechanical properties of MnO2-doped Y-TZP: the effects of holding time variations
by: Amiriyan, M., et al.
Published: (2012)

Sintering behavior of hydroxyapatite prepared from different routes
by: Ramesh, Singh, et al.
Published: (2012)

Low-temperature degradation (LTD) behaviour of CuO-Doped tetragonal zirconia ceramic
by: Ramesh, Singh, et al.
Published: (2012)

Sintering and densification behavior of ZnO-doped Y-TZP ceramics
by: Sankar, U., et al.
Published: (2011)

Sintering behaviour of hydroxyapatite prepared from different routes
by: S., Ramesh, et al.
Published: (2012)

Manufacturing of high toughness hydroxyapatite produced by wet chemical method
by: Tolouei, R., et al.
Published: (2012)

Sintering effects on the densification of nanocrystalline hydroxyapatite
by: Tolouei, R., et al.
Published: (2011)

Mechanical and electrical properties of Y-TZP/ZrB2 composite
by: Amiriyan, M., et al.
Published: (2012)

Effects of powder synthesis method on the sinterability of hydroxyapatite
by: K. L., Aw, et al.
Published: (2011)

Effect of nano silica on the sinterability of hydroxyapatite dense bodies
by: Ranna, Tolouei, et al.
Published: (2011)

Thermal Shock and Fatigue Behavior of Pressureless Sintered Al2O3–SiO2–ZrO2 Composites
by: Mebrahitom, A., et al.
Published: (2015)

Sintering properties of hydroxyapatite powders prepared using different methods
by: Ramesh, S., et al.
Published: (2012)

Sintering behavior of nanocrystalline hydroxyapatite produced by wet chemical method
by: Ramesh, Singh, et al.
Published: (2011)

Effect of grain size on vickers microhardness and fracture toughness in calcium phosphate bioceramics
by: Tolouei, R., et al.
Published: (2011)

Experimental analysis and pressureless sintering of powder processed functionally graded nickel alumina plates
by: Muhammad Ihsan, Abdul Latiff
Published: (2019)

Synthesis of high fracture toughness of hydroxyapatite bioceramics
by: Tan, Chou Yong, et al.
Published: (2011)

Effect of powder calcination on the sintering of hydroxyapatite
by: Tan, C.Y., et al.
Published: (2008)

Investigation on the effect of sintering temperature and composition of titanium (Ti) on electrical conductivity of al2o3/zro2/ti ceramic composites
by: Nur Amalina, Sabuan
Published: (2021)

Effects of bismuth oxide on the properties of calcium phosphate bioceramics
by: W., H. Yeo, et al.
Published: (2011)

Sintering behavior of hydroxyapatite ceramics prepared by different routes
by: Yong, T.C., et al.
Published: (2010)

Influence of sintering temperature on density, hardness, shrinkage and microstructure of alumina-zirconia cutting tool
by: A. A., Anis, et al.
Published: (2021)

Sintering and properties of dense manganese-doped calcium phosphate bioceramics prepared using sol-gel derived nanopowders
by: Sopyan, I., et al.
Published: (2011)

Densification behaviour and properties of manganese oxide doped Y-TZP ceramics
by: Ramesh, Singh, et al.
Published: (2011)

The development of ceramic insert of alumina toughened by zirconia and copper
by: Nurfatini, Zolkafli
Published: (2017)

The development of Zirconia and Copper toughened Alumina ceramic insert
by: Nur Amalina, Sabuan, et al.
Published: (2018)

The influence of sintering temperature on the properties of compacted bovine hydroxyapatite
by: Herliansyah, M.K., et al.
Published: (2009)

Effect of sintering profiles on the properties and ageing resistance of Y-TZP ceramic
by: Sivakumar, S., et al.
Published: (2011)

Synthesis of nano sized hydroxyapatite powder using sol-gel technique and its conversion to dense and porous bodies
by: Sopyan, I., et al.
Published: (2008)

Mechanochemical synthesis of hydroxyapatite bioceramics through two different milling media
by: Adzila, S., et al.
Published: (2013)

Strontium-doped hydroxyapatite nanopowder via sol-gel method : effect of strontium concentration and calcination temperature on phase behavior
by: C. M., Mardziah, et al.
Published: (2009)

Moulding parameter optimisation for the best sintered density
by: Jamaludin, Khairur Rijal, et al.
Published: (2009)

Sintering properties of zirconia-based ceramic composite
by: Chew, W.J., et al.
Published: (2014)

Preparation and characterization of al-al2o3 graded composite materials under different sintering conditions
by: Farah Fazira, Kamaruzaman
Published: (2020)

Porous alumina from protein foaming-consolidation method containing hydrothermal derived hydroxyapatited powder
by: Fadli, Ahmad, et al.
Published: (2012)

Synthesis of nano sized hydroxyapatite powder using sol-gel technique and its conversion to dense and porous bodies
by: Sopyan, Iis, et al.
Published: (2008)

Effect of sintering temperature on functionally graded nickel/alumina plate
by: Muhammad Ihsan, Abdul Latiff, et al.
Published: (2014)

Taguchi method for optimising the sintering parameter of the Metal Injection Moulding (MIM) compacts
by: Jamaludin, Khairur Rijal, et al.
Published: (2009)

Characterisation of Titanium Foams Sintered at Different Temperatures Prepared by the Slurry Method
by: Ahmad, Sufizar, et al.
Published: (2010)