A novel process on friction aided deep drawing using tapered blank holder divided into four segments
A new technique on friction aided deep drawing has been proposed. A metal blank holder was designed to be of two layers: stationary layer or base with four planes of 5degrees taper angle and moving layer divided into four tapered segments. Under appropriate blank holding force, these four segments c...
Main Authors: | Hassan, M.A., Suenaga, R., Takakura, N., Yamaguchi, K. |
---|---|
Format: | Article |
Published: |
2005
|
Subjects: |
Similar Items
-
Friction aided deep drawing of aluminum sheet using blank holder divided into four segments
by: Hatanaka, N., et al.
Published: (2010) -
A novel technique of friction aided deep drawing using a blank-holder divided into four segments
by: Hassan, M.A., et al.
Published: (2003) -
Friction aided deep drawing using newly developed blank-holder divided into eight segments
by: Hassan, M.A., et al.
Published: (2003) -
Friction aided deep drawing of sheet metals using polyurethane ring and auxiliary metal punch. Part 1: experimental observations on the deep drawing of aluminium thin sheets and foils
by: Hassan, M.A., et al.
Published: (2002) -
Friction aided deep drawing of sheet metals using polyurethane ring and auxiliary metal punch. Part 2: analysis of the drawing mechanism and process parameters
by: Hassan, M.A., et al.
Published: (2002)