Fiber length, thermal, mechanical, and dynamic mechanical properties of injection-molded glass-fiber/polyamide 6,6: Plasticization effect

Fiber length, thermal, mechanical, and dynamic mechanical properties of injection-molded glass-fiber/polyamide 6,6: Plasticization effect

Unreinforced- and glass fiber-reinforced-polyamide 6,6 specimens were subjected to dry, 50 RH, and wet conditions. FLD study showed that more fiber degradation occurred during processing of the composites with higher fiber loading. TGA results revealed that about 2 and 5 levels of moisture have been...

Full beskrivning

Bibliografiska uppgifter
Huvudupphovsmän:	Hassan, A., Salleh, N.M., Yahya, R., Sheikh, M.R.K.
Materialtyp:	Artikel
Publicerad:	2011
Ämnen:	QD Chemistry

Liknande verk

Tensile, impact and fiber length properties of injection-molded short and long glass fiber-reinforced polyamide 6,6 composites
av: Hassan, A., et al.
Publicerad: (2004)

Interfacial shear strength and tensile properties of injection-molded, short- and long-glass fiber-reinforced polyamide 6,6 composites
av: Hassan, A., et al.
Publicerad: (2011)

Moisture absorption effect on thermal, dynamic mechanical and mechanical properties of injection-molded short glass-fiber/polyamide 6,6 composites
av: Hassan, A., et al.
Publicerad: (2012)

Sustainable basalt fiber reinforced polyamide 6,6 composites: Effects of fiber length and fiber content on mechanical performance
av: Zavier Blackman, et al.
Publicerad: (2024-07-01)

Fibre length, thermal and mechanical properties of injection-moulded glass-fibre/polyamide 6,6 composites: effect of moisture absorption
av: Yahya, R., et al.
Publicerad: (2011)

Conditioning effects on thermal and dynamic mechanical properties of injection moulded glass fibre reinforced polyamide 6,6 composites
av: Aziz, H., et al.
Publicerad: (2011)

Thermal and mechanical properties of injection moulded short glass/short carbon hybrid fibre reinforced polyamide 6,6 composites
av: Hassan, A.
Publicerad: (2009)

Mechanical properties of glass fiber reinforced polyamide 6 / acrylonitrile butadiene styrene composite /
av: 298467 Rolizawati Ibrahim, et al.
Publicerad: (2007)

Digital fiber length determination for injection molded glass fiber reinforced composite materials
av: Andreas Grießer, et al.
Publicerad: (2025-02-01)

Antibacterial Properties of Functional Polyamide 6.6
av: El Bouchti Mehdi, et al.
Publicerad: (2014-06-01)

Tribological and Mechanical Behaviors of Polyamide 6/Glass Fiber Composite Filled with Various Solid Lubricants
av: Duxin Li, et al.
Publicerad: (2013-01-01)

Effect of fiber length on the mechanical properties of multi jet fusion-printed glass fiber/polyamide 12 composites
av: Leong, Kah Kit
Publicerad: (2021)

Micro-structural, thermal, and mechanical properties of injection-molded glass fiber/nanoclay/polypropylene composites
av: Rahman, N.A., et al.
Publicerad: (2012)

Plastics - polyamide 66,610 and 6 - accelerated conditioning of test specimens
av: 5087 International Organization for Standardization

Tensile Properties of Glass Fiber Reinforced Polyamide 6-Polypropylene Composites
av: Nurizzathanis, Mohamad Kusaseh, et al.
Publicerad: (2017)

Manufacturing and Analysis of Mechanical Properties of Overmolded Hybrid Carbon Fiber Reinforced Polypropylene â�� Glass Fiber Reinforced Polyamide 6
av: Rochardjo, Heru Santoso Budi, et al.
Publicerad: (2023)

Nanocomposites of recycled and of virgin polyamide 6.6 with cellulose nanofibers
av: Daiane Benaducci, et al.
Publicerad: (2024-08-01)

Extrusion and injection-molding of glass fiber/MAPP/polypropylene: Effect of coupling agent on DSC, DMA, and mechanical properties
av: Hassan, A., et al.
Publicerad: (2011)

Investigation on mechanical properties of glass fiber reinforced polyamide 6-polypropylene composites under different operating conditions
av: Nurizzathanis, Mohamad Kusaseh
Publicerad: (2020)

Effect Of Organoclay Modification On The Mechanical, Morphology, And Thermal Properties Of Injection Molded Polyamide 6/Polypropylene/Montmorillonite Nanocomposites.
av: Mohd Ishak, Z.A., et al.
Publicerad: (2008)

Diffusion at the interface of laser welded polyamide-6.6 and aluminum assemblies
av: P. Hirchenhahn, et al.
Publicerad: (2024-11-01)

Influence of glass fiber content on the flexural properties of polyamide 6-polypropylene blend composites
av: Nurizzathanis, Mohamad Kusaseh, et al.
Publicerad: (2020)

Design, Analysis And Fabrication Of Glass Fiber-Reinforced Pa 6,6 Composite Automotive Clutch Pedals
av: Syed Shaharuddin, Sharifah Imihezri
Publicerad: (2005)

Mechanical properties of nylon fiber reinforced polyamide 6 / acrylonitrile - butadiene - styrene composite /
av: 301127 Siti Mariam Mohd. Noh, et al.
Publicerad: (2007)

Plasticisation effect on thermal and tensile properties of injection moulded short glass Fibreipol yamide 6,6 composites
av: Hassan, A., et al.
Publicerad: (2010)

Experimental investigation on flexure and impact properties of injection molded polypropylene-nylon 6-glass fiber polymer composites
av: Nuruzzaman, D. M., et al.
Publicerad: (2018)

Properties of kenaf fiber-reinforced polyamide 6 composites
av: Abdullah, Norihan, et al.
Publicerad: (2024)

Properties of kenaf fiber-reinforced polyamide 6 composites
av: Abdullah, Norihan, et al.
Publicerad: (2024)

Development of post conditioning injection molding process control on glass filled nylon (polyamide 6) composites for global product engineering
av: Abdul Rahman, Abdul Azim
Publicerad: (2019)

Experimental Study of Fiber Length and Orientation in Injection Molded Natural Fiber/Starch Acetate Composites
av: Heidi Peltola, et al.
Publicerad: (2011-01-01)

Mechanical, thermal and morphological properties of Recycled Polyamide-6/Recycled polypropylene blend reinforced by kenaf fiber /
av: Suhailah Mohd. Sukri, 1989-, author, et al.
Publicerad: (2012)

Mechanical, thermal and morphological properties of Recycled Polyamide-6/Recycled polypropylene blend reinforced by kenaf fiber /
av: Suhailah Mohd. Sukri, 1989-, author, et al.
Publicerad: (2012)

Silica Deposition on Polyamide 6,6 Fabrics by Hybrid Corona-Dielectric Barrier Discharge Plasma
av: Isabella Grinberg Francelino, et al.
Publicerad: (2025-01-01)

Effect of Fiber Orientation on Tensile Properties of Short Glass Fiber Reinforced Injection Molding Polypropylene Composite
av: Ya'acob, Abdul Malek
Publicerad: (2004)

Fiber Orientation Analysis of Overflow Water-Assisted Injection Molding with Short Glass Fiber Reinforced Polypropylene
av: Dongyou Huang, et al.
Publicerad: (2022-01-01)

Effect of Expanded Graphite on Mechanical and Tribological Properties of Polyamide 6/Glass Fibre Composites
av: Dajana Japić, et al.
Publicerad: (2022-01-01)

Investigation of copolymeric polyamide-6/66 electrospinning process in ethanol-water mixture
av: N. A. Gruzdev, et al.
Publicerad: (2013-12-01)

Improvement of Mechanical Properties of Injection-Molded Polylactic Acid–Kenaf Fiber Biocomposite
av: Anuar, Hazleen, et al.
Publicerad: (2012)

The effect of specimen geometry and testing parameters on impact properties of injection moulded glass fibre/polyamide 6 composites
av: Hassan, Aziz, et al.
Publicerad: (2011)

Thermomechanical and damage characterisation of short glass fibre reinforced polyamide 6 and impact-modified polyamide 6 composites
av: Song, P, et al.
Publicerad: (2024)