Lasing in Ne-Like Argon capillary discharge at low current and the effect of current prepulse
The output characteristics of saturated capillary discharge 46.9 nm Ne-Like argon soft x-ray laser obtained with relatively low main discharge current of less than 20 kA, with the lowest being 9 kA. The 3 mm diameter and 200 mm long alumina capillary with Argon filling pressure range between 0.1-0.4...
Main Authors: | Kwek, K.H., Tan, C.A. |
---|---|
Format: | Conference or Workshop Item |
Language: | English |
Published: |
2008
|
Subjects: | |
Online Access: | http://eprints.um.edu.my/9141/1/All.pdf |
Similar Items
-
Thermal decomposition of decomposed woods under argon atmosphere
by: Othman, Noraishah, et al.
Published: (2006) -
Influences of trace water in hydrogen and argon on the tribological properties of pure iron
by: Fukuda, Kanao, et al.
Published: (2013) -
Influence of Glow and Afterglow Times on the Discharge Current of Argon at Low Pressure
by: Ahmed Y. Owaid
Published: (2023-04-01) -
Effects of argon/nitrogen sputtering gas on the microstructural, crystallographic and piezoelectric properties of AlN thin films
by: Abd Samad, Muhammad Izzuddin, et al.
Published: (2023) -
Effect of ph and moisture content on current density of impressed current cathodic protection : response surface methodology study
by: Baharuddin, Dzulikram, et al.
Published: (2018)