Anaerobic Fluidized Bed Treatment of Palm Oil Mill Effluent
A 2 m³ pilot scale anaerobic fluidized bed reactor (APBR) was designed, constructed and operated to study its ability to treat high-strength industrial wastewater, at ambient temperature. Besides performance evaluation, kinetic coefficients of three models were determined. Reactor response to pH...
| Main Author: | |
|---|---|
| Format: | Thesis |
| Language: | English English |
| Published: |
1997
|
| Subjects: | |
| Online Access: | http://psasir.upm.edu.my/id/eprint/10002/1/FK_1997_6_A.pdf |
| Summary: | A 2 m³ pilot scale anaerobic fluidized bed reactor (APBR) was designed, constructed
and operated to study its ability to treat high-strength industrial wastewater, at ambient
temperature. Besides performance evaluation, kinetic coefficients of three models were
determined. Reactor response to pH shock load was also carried out.
An early start-up of 17 days was experienced with diluted palm oil mill etlluent
(POME) of 2000 mg/l COD. The hydraulic retention time (HRT) was reduced step wise
from 24 hr to 4 hr which resulted in volumetric loading rates of 4.0 kgCOD/m³.d to 13.8
kgCOD/m³.d respectively. Maximum COD removal efficiencies achieved at those loading
rates were between 65% and 85%. BOD and TSS removal rates were varied in the range
of 64% - 91 % and 68% - 89% respectively. The raw substrate was rich in nitrogen
nutrients and 17% to 55% of total nitrogen could be removed. Optimum HRT for the COD removal was found to be 1 2 hour, which was much less than that of conventional
tank digester system. Reactor performance was found to be a function of loading rate,
which decreased steadily with the increased loading rates.
The AFBR exhibited low sludge production with sludge volume indices (SVI) of
between 11 l/mg and 35 l/mg. General kinetic coefficients for Monod, Contois and Chen
& Hashimoto's models were b = 0.23, Y = 0.79, µm = 4.63 and K = 2.47. Specific
coefficients for Monod's model were k = 1 .22 and K. = 577, and for Contois' model, B =
0.05 and µm = 0.86. The pilot plant exhibited good buffering ability when pH shock load of
5.0 was imposed on the AFBR. |
|---|