Acoustic Properties of Low Density Oil Palm (Elaeis Guineensis Jacq) Fibreboard
An ultrasonic test was carried out to determine the acoustic properties of low density oil palm fibreboard. The main objective of this study was to investigate the suitability of using oil palm empty fruit bunches (EFB) as partial replacement for the acoustic materials in audio room. The board...
| Main Author: | |
|---|---|
| Format: | Thesis |
| Language: | English English |
| Published: |
2000
|
| Subjects: | |
| Online Access: | http://psasir.upm.edu.my/id/eprint/10017/1/FH_2000_5_IR.pdf |
| Summary: | An ultrasonic test was carried out to determine the acoustic
properties of low density oil palm fibreboard. The main objective of this
study was to investigate the suitability of using oil palm empty fruit
bunches (EFB) as partial replacement for the acoustic materials in audio
room.
The board was manufactured by using rubberwood (Hevea
bracilliensis) and oil palm (Elaeis guineensis, Jacq). The rubberwood was
used as the control. Three levels of board density and five thicknesses
were used to investigate the relationship of acoustic parameters (wave
velocity and attenuation coefficient) to these independent variables. In addition, this study consisted of two sub-studies; (i) the effect of resin
content on the acoustic properties, and (ii) the trend of pulse velocity
travelling through the boards of different thicknesses.
The result showed that the acoustic properties of oil palm boards
were significantly affected by a variation in board densities and
thicknesses, as well as resin content. On the other hand, it was found
that the velocity of pulse was influenced by the variation in the resin
content, thickness and density of the boards.
The pulse velocity, which travels through the EFB, was similar to
that of rubberwood boards, suggesting that the acoustic properties of
EFB were in the same class as that of rubberwood. The board with 12
mm thickness was found to be able to absorb more pulse wave than the
board of other thicknesses for each type of board density.
Based on the result, the low density oil palm fibreboard was
suitable to be used as a core layer for building a wall in audio room.
However, it needs further improvement on it's design and structure to
have a better performance as the absorbent materials. This study also
found that the ultrasonic test could be a good non-destructive test
method to assess the acoustic properties. |
|---|