Thermal diffusivity measurement for p-Si and Ag/p-Si by photoacoustic technique

Thermal diffusivity (TD) of p-Si and Ag/p-Si samples were measured by photoacoustic technique using open photoacoustic cell (OPC). The samples were annealed by heating them at 960, 1050, 1200, and 1300 °C for 3 h in air. The thermal diffusivity of Ag-coated samples was obtained by fitting the photoa...

Full description

Bibliographic Details
Main Authors: Hussein, Mohammed Jabbar, Mat Yunus, Wan Mahmood, Mohamed Kamari, Halimah, Zakaria, Azmi
Format: Article
Language:English
Published: Springer New York 2015
Online Access:http://psasir.upm.edu.my/id/eprint/46723/1/Thermal%20diffusivity%20measurement%20for%20p-Si%20and%20Agp-Si%20by%20photoacoustic%20technique.pdf
Description
Summary:Thermal diffusivity (TD) of p-Si and Ag/p-Si samples were measured by photoacoustic technique using open photoacoustic cell (OPC). The samples were annealed by heating them at 960, 1050, 1200, and 1300 °C for 3 h in air. The thermal diffusivity of Ag-coated samples was obtained by fitting the photoacoustic experimental data to the thermally thick equation for Rosencwaig and Gersho (RG) theory. For the single layer samples, the thermal diffusivity can be obtained by fitting as well as by obtaining the critical frequency f c . In this study, the thermal diffusivity of the p-Si samples increased with increasing the annealing temperature. The thermal diffusivity of the Ag/p-Si samples, after reaching the maximum value of about 2.73 cm2/s at a temperature of 1200 °C, decreased due to the silver complete melt in the surface of the silicon.