Design of 8-bit SAR-ADC CMOS
Successive approximation analog-to-digital converter (ADC) implemented in a conventional 0.18μm CMOS technology with low voltage. The SAR composite of sample-and-hold dummy switch compensation was employed, comparator is low-voltage latched and realized based on current-mode approach, control logic...
| Main Authors: | , , , |
|---|---|
| Format: | Conference or Workshop Item |
| Language: | English |
| Published: |
IEEE
2009
|
| Online Access: | http://psasir.upm.edu.my/id/eprint/68879/1/Design%20of%208-bit%20SAR-ADC%20CMOS.pdf |
| Summary: | Successive approximation analog-to-digital converter (ADC) implemented in a conventional 0.18μm CMOS technology with low voltage. The SAR composite of sample-and-hold dummy switch compensation was employed, comparator is low-voltage latched and realized based on current-mode approach, control logic circuit and digital-to-analog conversion consists of binary weighted capacitor arrays for the differential inputs. The ADC has INL and DNL of 0.45 LSB for supply voltage 1.8V, at sampling rate 200 KS/S and signal to noise ratio distortion is 58.5 dB. This design is suitable for standard CMOS technology with low-power low-cost VLSI implementation. It is well applied when embedded into system-on-chip (SOC) circuit designs. |
|---|