On the fabrication of aluminum doped silica preform using MCVD and solution doping technique

On the fabrication of aluminum doped silica preform using MCVD and solution doping technique

This paper provides detailed discussions on the fabrication of aluminum doped silica preform using solution doping technique and modified chemical vapor deposition (MCVD). The porous core layer was deposited at 1750°C with 30cm in deposition length. The soot formed at the inlet and outlet segment of...

Descrizione completa

Dettagli Bibliografici
Autori principali: Aljamimi, Salah Mohammed, Mat Sharif, Khairul Anuar, Muhamad Yassin, Shahrin Zen, Zulkifli, Mohd Imran, Tamchek, Nizam, Yusoff, Zulfadzli, Abdul Rashid, Hairul Azhar
Natura: Conference or Workshop Item
Lingua:English
Pubblicazione: IEEE 2012
Accesso online:http://psasir.upm.edu.my/id/eprint/69505/1/On%20the%20fabrication%20of%20aluminum%20doped%20silica%20preform%20using%20MCVD%20and%20solution%20doping%20technique.pdf
Descrizione
Riassunto:This paper provides detailed discussions on the fabrication of aluminum doped silica preform using solution doping technique and modified chemical vapor deposition (MCVD). The porous core layer was deposited at 1750°C with 30cm in deposition length. The soot formed at the inlet and outlet segment of the deposited length is analyzed using SEM for soot size and BET for pore size distribution. Refractive index profile of the doped preform is measured using preform analyzer. The refractive index difference obtained at the outlet and inlet segments shows uniform distribution of Al2O3, in agreement with the pore size distribution.

Documenti analoghi