Microstructural and shear strength properties of GNSs-reinforced Sn-1.0Ag-0.5Cu (SAC105) composite solder interconnects on plain Cu and ENIAg surface finish

Microstructural and shear strength properties of GNSs-reinforced Sn-1.0Ag-0.5Cu (SAC105) composite solder interconnects on plain Cu and ENIAg surface finish

Show other versions (1)

In this study, the combined effect of GNSs (graphene nanosheets) and ENIAg (Electroless Nickel Immersion Silver) surface finish on the formation of intermetallic compounds (IMCs) and shear strength of the Sn-1.0Ag-0.5Cu (SAC105) solder system was studied. Both plain and composite solder systems (SAC...

Full description

Bibliographic Details
Main Authors:	K., Vidyatharran, M. A., Azmah Hanim, Dele-Afolabi, T. T., Matori, K. A., O., Saliza Azlina
Format:	Article
Published:	Elsevier 2021

Similar Items

Microstructural and shear strength properties of GNSs-reinforced Sn-1.0Ag-0.5Cu (SAC105) composite solder interconnects on plain Cu and ENIAg surface finish
by: K. Vidyatharran, et al.
Published: (2021-11-01)

Interfacial microstructure evolution and shear strength of MWCNTs-reinforced Sn-1.0Ag-0.5Cu (SAC105) composite solder interconnects on plain Cu and ENIAg surface finish
by: Dele-Afolabi, T. T., et al.
Published: (2022)

Interfacial microstructure evolution and shear strength of MWCNTs-reinforced Sn-1.0Ag-0.5Cu (SAC105) composite solder interconnects on plain Cu and ENIAg surface finish
by: Dele-Afolabi, Temitope T., et al.
Published: (2022)

Microstructural and shear strength properties of RHA-reinforced Sn–0.7Cu composite solder joints on bare Cu and ENIAg surface finish
by: M. A., Azmah Hanim, et al.
Published: (2020)

Microstructural and shear strength properties of RHA-reinforced Sn–0.7Cu composite solder joints on bare Cu and ENIAg surface finish
by: Mohamed Ariff, Azmah Hanim, et al.
Published: (2020)

Shear analysis of rice husk ash RHA reinforced tin- 0.7-copper composite solders on electroless nickel/immersion silver ENIAg surfaces
by: Mohamed Ariff, Azmah Hanim, et al.
Published: (2021)

Thermal Cyclic Test For Sn-4Ag-0.5Cu Solders On High P Ni/Au AND Ni/Pd/Au Surface Finishes
by: Azmah Hanim, Mohamad Ariff, et al.
Published: (2015)

Thermal Cyclic Test for Sn-4Ag-0.5Cu Solders on High P Ni/Au and Ni/Pd/Au Surface Finishes
by: Siti Rabiatull Aisha, Idris, et al.
Published: (2015)

Thermal cyclic test for Sn-4Ag-0.5Cu solders on high P Ni/Au and Ni/Pd/Au surface finishes
by: Mohamed Ariff, Azmah Hanim, et al.
Published: (2015)

Thermal cyclic test for Sn-4Ag-0.5Cu solders on high P Ni/Au and Ni/Pd/Au surface finishes
by: M.A. Azmah Hanim, et al.
Published: (2015-12-01)

Interfacial analysis of carbon nanotubes-reinforced and graphene-reinforced Sn-1.0Ag-0.5Cu solder on electroless nickel/ immersion silver surface finish
by: Krishna, Vidyatharran
Published: (2020)

The effect of nickel doping on SAC305 lead-free solders and EN(B)EPIG surface finish
by: Osman, Saliza Azlina, et al.
Published: (2014)

Low-temperature interconnection and strengthening mechanism of Cu/Cu joint with SAC particles solders
by: Gui-sheng Gan, et al.
Published: (2023-07-01)

Enhancement of SAC105 solder for vacuum soldering with Cu substrates through incorporation of activated Ti nanoparticles
by: ChuanJiang Wu, et al.
Published: (2024-01-01)

Influence of Difference Solders Volume on Intermetallic Growth of Sn-4.0Ag-0.5Cu/ENEPIG
by: Saliza Azlina O., et al.
Published: (2016-01-01)

Effect of isothermal aging 2000 hours on intermetallics formed between Ni-Pd-Au with Sn-4Ag-0.5Cu solders
by: Mohamed Ariff, Azmah Hanim, et al.
Published: (2013)

Effect of isothermal aging 2000 hours on intermetallics formed between ni-pd-au with sn-4ag-0.5cu solders
by: Mohamed Ariff, Azmah Hanim, et al.
Published: (2013)

Microstructure and hardness of SAC305 and SAC305-0.3Ni solder on Cu, high temperature treated Cu, and graphene-coated Cu substrates
by: Shengli Li, et al.
Published: (2018-12-01)

Intermetallic Evolution for Isothermal Aging Up To 2000hours on Sn-4ag-0.5cu and Sn-37pb Solders with Ni/Au Layers
by: Siti Rabiatull Aisha, Idris, et al.
Published: (2013)

Intermetallic Evolution for Isothermal Aging up to 2000 Hours on Sn-4Ag-0.5Cu and Sn-37Pb Solders with Ni/Au Layers
by: Azmah Hanim, Mohamad Ariff, et al.
Published: (2013)

Interfacial reaction of Cu/SAC105/Cu solder joints reinforced with Ti nanoparticles under vacuum thermo-compression bonding
by: Chuanjiang Wu, et al.
Published: (2024-03-01)

Interfacial reaction between Sn -37Pb and Sn - 4Ag - 0.5Cu solders on different surface finishes /
by: 456454 Azmah Hanim Mohamed Ariff, et al.
Published: (2007)

Comparative study on the isothermal aging of bare Cu and ENImAg surface finish for Sn-Ag-Cu solder joints
by: M.A., Rabiatul Adawiyah, et al.
Published: (2018)

Interfacial reaction between Sn -37Pb and Sn - 4Ag - 0.5Cu solders on different surface finishes [electronic resource] /
by: 456454 Azmah Hanim Mohamed Ariff, et al.
Published: (2007)

Effect Of Solder Volume on Interfacial Reaction Between SAC405 Solders and EN(B)EPIG Surface Finish
by: Siti Rabiatull Aisha, Idris, et al.
Published: (2014)

Intermetallic growth of SAC237 solder paste reinforced with 0.01wt.% multi-walled carbon nanotubes
by: Mohd Najib, Mohamad Aznan, et al.
Published: (2015)

Interfacial reaction analysis of Sn-Ag-Cu solder reinforced with 0.01wt% CNTs with isothermal aging
by: Mohamed Ariff, Azmah Hanim, et al.
Published: (2016)

Impact of different isothermal aging conditions on the IMC layer growth and shear strength of MWCNT-reinforced Sn-5Sb solder composites on Cu substrate
by: T. Temitope, Dele Afolabi, et al.
Published: (2019)

Study on Microstructure and Mechanical Properties at Constant Electromigration Temperature of Sn2.5Ag0.7Cu0.1RE0.05Ni-GNSs/Cu Solder Joints
by: Chao Zhang, et al.
Published: (2023-03-01)

Potential enhancement in mechanical and physical properties of Sn-Ag-Cu lead free solder as a replacement material for Sn-Pb in electronic packaging
by: Mat Hussin, Nur Liyana, et al.
Published: (2015)

Influence of multi-walled carbon nanotubes on melting temperature and microstructural evolution of Pb-free Sn-5Sb/Cu solder joint
by: Theophilus, Dele-Afolabi Temitope, et al.
Published: (2015)

The effect of cooling rate during multiple reflow soldering on intermetallic layer of Sn-4.0 Ag-0.5Cu/ENImAg
by: M.A., Rabiatul Adawiyah, et al.
Published: (2019)

Behavior of Sn-3.0Ag-0.5Cu solder/Cu fluxless soldering via Sn steaming under formic acid atmosphere
by: Siliang He, et al.
Published: (2022-11-01)

The effect of different Sn-Ag-Cu (SAC) solder form on solder/Cu joint performance through microwave hybrid heating
by: Maliessa Nabilah, Mazelan
Published: (2023)

Effect of solder bump size on interfacial reactions during soldering between Pb-free solder and Cu and Ni/Pd/Au surface finishes
by: F., Nor Akmal, et al.
Published: (2007)

A Study of Temperature, Microstructure and Hardness Properties of Sn-3.8Ag-0.7Cu (SAC) Solder Alloy
by: Singh Amares, et al.
Published: (2015-01-01)

Intermetallic compound formation between Sn - 37Pb & Sn - Ag - Cu lead - free solders and immersion silver surface finish
by: Osman, Saliza Azlina
Published: (2008)

Study on the Influence of Defects on Fracture Mechanical Behavior of Cu/SAC305/Cu Solder Joint
by: Sinan Zhang, et al.
Published: (2022-07-01)

Recent advances in Sn-based lead-free solder interconnects for microelectronics packaging: Materials and technologies
by: T.T. Dele-Afolabi, et al.
Published: (2023-07-01)

Recent advances in Sn-based lead-free solder interconnects for microelectronics packaging: materials and technologies
by: Dele-Afolabi, T.T., et al.
Published: (2023)