Merekabentuk Dan Membina Penukar Buck Dc Ke Dc Dengan Sistem Kawalan Gegelung Suap Balik
The project of design and construction of dc – dc buck converter with feedback loop control system is not a new design in use of application with many electronic apparatus nowadays. This project used feedback loop control system as a controller as a circuit that control the smooth flow of cond...
| Main Author: | |
|---|---|
| Format: | Monograph |
| Language: | English |
| Published: |
Universiti Sains Malaysia
2006
|
| Subjects: | |
| Online Access: | http://eprints.usm.my/58739/1/Merekabentuk%20Dan%20Membina%20Penukar%20Buck%20Dc%20Ke%20Dc%20Dengan%20Sistem%20Kawalan%20Gegelung%20Suap%20Balik_Khairudin%20Ismail.pdf |
| Summary: | The project of design and construction of dc – dc buck converter with feedback loop
control system is not a new design in use of application with many electronic apparatus
nowadays. This project used feedback loop control system as a controller as a circuit that
control the smooth flow of conducted current and voltage. This project used an integrated
circuit model NCP 1501 as dc switching controller circuit and produced by ON
Semiconductor. This IC is built from a few smaller circuit that been internally built inside
IC and it shows that buck converter operation I/O system are within the IC itself. The
system used inside this project save money and give benefits particularly to user because
of cheap cost of the component. For simulation, we use software called OrCAD 9.0
where simulation of waveform of input and output voltage and current conducted in the
circuit. This software can provide schematic diagram and output waveform of our
choice. Many researches have been done in order for better understanding about dc buck
converter. Hopefully this report helps you to explain more about the design ands
construction of dc – dc buck converter using feed back loop control system. |
|---|