A Sustainable Approach for Removing Organic Pollutants from Food Processing Effluents Using Unmodified Cocopeat as an Adsorbent

Food production (chips) uses raw materials such as tapioca, cassava, banana, and many more, which contribute to excessive pollutants in the water. Thus, there is a need to treat effluent sufficiently to prevent undesired pollutants from being released into the receiving water bodies, such as rivers...

Full description

Bibliographic Details
Main Authors: Ab Aziz, Nur Adila, Ruslan, Fatin Najihah, Wesam Al Madhoun, Wesam Al Madhoun
Format: Article
Language:English
Published: uthm 2023
Subjects:
Online Access:http://eprints.uthm.edu.my/10689/1/J16061_c3f633127ee8f8cf2b67e068e0d57a26.pdf
_version_ 1796870215754055680
author Ab Aziz, Nur Adila
Ruslan, Fatin Najihah
Wesam Al Madhoun, Wesam Al Madhoun
author_facet Ab Aziz, Nur Adila
Ruslan, Fatin Najihah
Wesam Al Madhoun, Wesam Al Madhoun
author_sort Ab Aziz, Nur Adila
collection UTHM
description Food production (chips) uses raw materials such as tapioca, cassava, banana, and many more, which contribute to excessive pollutants in the water. Thus, there is a need to treat effluent sufficiently to prevent undesired pollutants from being released into the receiving water bodies, such as rivers and agricultural drainage systems. This study aims to investigate the effectiveness of cocopeat in removing targeted parameters such as suspended solids (SS), chemical oxygen demand (COD), ammoniacal nitrogen (NH3-N), and total phosphorus (TP) from the chips processing effluent. Batch experiments were conducted to determine optimum operating parameters, including the adsorbent dosage, contact time, and shaking speed. This was done to identify the best removal rates of SS, COD, NH3-N and TP from effluent food processing samples taken from two different discharge points based on their usages. The experimental results show that at the optimum conditions of pH 7, cocopeat dosages of 800 mg/L, contact time of 30 minutes, and shaking speeds of 200 rpm, the unmodified cocopeat achieved 17.3% and 19.8% of SS removal, 35.5% and 28.9% of COD removal, 40.7% and 30.5% of NH3-N removal, and 53.5% and 59.2% of TP removal, from Point A and Point B effluent, respectively. Besides, the maximum adsorption capacity achieved by unmodified cocopeat towards SS (1.5-14.0 mg/g), COD (16.88-17.75 mg/g), NH3-N (0.31-0.32 mg/g) and TP (1.46-1.50 mg/g) are comparable to the adsorption capacities reported by previous researchers. This finding suggests that cocopeat could potentially replace the commercially developed adsorbents for the treatment. Furthermore, this study gave insights into the feasibility of sustainable treatment using cocopeat as an adsorbent for medium-strength effluent. However, it is suggested that further alteration of the cocopeat characteristics, either by chemical or physical modifications, and its sludge disposal method could be explored further to enhance the treatment performance.
first_indexed 2024-03-05T22:06:13Z
format Article
id uthm.eprints-10689
institution Universiti Tun Hussein Onn Malaysia
language English
last_indexed 2024-03-05T22:06:13Z
publishDate 2023
publisher uthm
record_format dspace
spelling uthm.eprints-106892024-01-15T07:34:05Z http://eprints.uthm.edu.my/10689/ A Sustainable Approach for Removing Organic Pollutants from Food Processing Effluents Using Unmodified Cocopeat as an Adsorbent Ab Aziz, Nur Adila Ruslan, Fatin Najihah Wesam Al Madhoun, Wesam Al Madhoun T Technology (General) Food production (chips) uses raw materials such as tapioca, cassava, banana, and many more, which contribute to excessive pollutants in the water. Thus, there is a need to treat effluent sufficiently to prevent undesired pollutants from being released into the receiving water bodies, such as rivers and agricultural drainage systems. This study aims to investigate the effectiveness of cocopeat in removing targeted parameters such as suspended solids (SS), chemical oxygen demand (COD), ammoniacal nitrogen (NH3-N), and total phosphorus (TP) from the chips processing effluent. Batch experiments were conducted to determine optimum operating parameters, including the adsorbent dosage, contact time, and shaking speed. This was done to identify the best removal rates of SS, COD, NH3-N and TP from effluent food processing samples taken from two different discharge points based on their usages. The experimental results show that at the optimum conditions of pH 7, cocopeat dosages of 800 mg/L, contact time of 30 minutes, and shaking speeds of 200 rpm, the unmodified cocopeat achieved 17.3% and 19.8% of SS removal, 35.5% and 28.9% of COD removal, 40.7% and 30.5% of NH3-N removal, and 53.5% and 59.2% of TP removal, from Point A and Point B effluent, respectively. Besides, the maximum adsorption capacity achieved by unmodified cocopeat towards SS (1.5-14.0 mg/g), COD (16.88-17.75 mg/g), NH3-N (0.31-0.32 mg/g) and TP (1.46-1.50 mg/g) are comparable to the adsorption capacities reported by previous researchers. This finding suggests that cocopeat could potentially replace the commercially developed adsorbents for the treatment. Furthermore, this study gave insights into the feasibility of sustainable treatment using cocopeat as an adsorbent for medium-strength effluent. However, it is suggested that further alteration of the cocopeat characteristics, either by chemical or physical modifications, and its sludge disposal method could be explored further to enhance the treatment performance. uthm 2023 Article PeerReviewed text en http://eprints.uthm.edu.my/10689/1/J16061_c3f633127ee8f8cf2b67e068e0d57a26.pdf Ab Aziz, Nur Adila and Ruslan, Fatin Najihah and Wesam Al Madhoun, Wesam Al Madhoun (2023) A Sustainable Approach for Removing Organic Pollutants from Food Processing Effluents Using Unmodified Cocopeat as an Adsorbent. INTERNATIONAL JOURNAL OF SUSTAINABLE CONSTRUCTION ENGINEERING AND TECHNOLOGY, 14 (2). pp. 176-183. ISSN 2180-3242 https://doi.org/10.30880/ijscet.2023.14.02.018
spellingShingle T Technology (General)
Ab Aziz, Nur Adila
Ruslan, Fatin Najihah
Wesam Al Madhoun, Wesam Al Madhoun
A Sustainable Approach for Removing Organic Pollutants from Food Processing Effluents Using Unmodified Cocopeat as an Adsorbent
title A Sustainable Approach for Removing Organic Pollutants from Food Processing Effluents Using Unmodified Cocopeat as an Adsorbent
title_full A Sustainable Approach for Removing Organic Pollutants from Food Processing Effluents Using Unmodified Cocopeat as an Adsorbent
title_fullStr A Sustainable Approach for Removing Organic Pollutants from Food Processing Effluents Using Unmodified Cocopeat as an Adsorbent
title_full_unstemmed A Sustainable Approach for Removing Organic Pollutants from Food Processing Effluents Using Unmodified Cocopeat as an Adsorbent
title_short A Sustainable Approach for Removing Organic Pollutants from Food Processing Effluents Using Unmodified Cocopeat as an Adsorbent
title_sort sustainable approach for removing organic pollutants from food processing effluents using unmodified cocopeat as an adsorbent
topic T Technology (General)
url http://eprints.uthm.edu.my/10689/1/J16061_c3f633127ee8f8cf2b67e068e0d57a26.pdf
work_keys_str_mv AT abaziznuradila asustainableapproachforremovingorganicpollutantsfromfoodprocessingeffluentsusingunmodifiedcocopeatasanadsorbent
AT ruslanfatinnajihah asustainableapproachforremovingorganicpollutantsfromfoodprocessingeffluentsusingunmodifiedcocopeatasanadsorbent
AT wesamalmadhounwesamalmadhoun asustainableapproachforremovingorganicpollutantsfromfoodprocessingeffluentsusingunmodifiedcocopeatasanadsorbent
AT abaziznuradila sustainableapproachforremovingorganicpollutantsfromfoodprocessingeffluentsusingunmodifiedcocopeatasanadsorbent
AT ruslanfatinnajihah sustainableapproachforremovingorganicpollutantsfromfoodprocessingeffluentsusingunmodifiedcocopeatasanadsorbent
AT wesamalmadhounwesamalmadhoun sustainableapproachforremovingorganicpollutantsfromfoodprocessingeffluentsusingunmodifiedcocopeatasanadsorbent