Investigation of cutting temperature and cutting force from mist flow pattern in MQL technique

Investigation of cutting temperature and cutting force from mist flow pattern in MQL technique

Minimum Quantity Lubrication (MQL) is an alternative method to supply the cutting fluid in the formation of mist. MQL has proven to reduce machining cost and increase machining performance. Previous research have stated that machining performance is affected by the lubricant type, flow rate, the...

Cur síos iomlán

Sonraí bibleagrafaíochta
Príomhchruthaitheoir:	Dorairaju, Hemarani
Formáid:	Tráchtas
Teanga:	English English
Foilsithe / Cruthaithe:	2015
Ábhair:	TJ1040-1119 Machinery exclusive of prime movers
Rochtain ar líne:	http://eprints.uthm.edu.my/1318/1/24p%20HEMARANI%20DORAIRAJU.pdf http://eprints.uthm.edu.my/1318/2/HEMARANI%20DORAIRAJU%20WATERMARK.pdf

Míreanna comhchosúla

A performance of 2 dimensional ultrasonic vibration assisted milling in cutting force reduction, on aluminium AL6061
de réir: Ibrahim, Rasidi, et al.
Foilsithe / Cruthaithe: (2016)

Orthogonal cutting performance of vegetable-based lubricants via minimum quantity lubrication technique on AISI 316L
de réir: Abdul Sani, Amiril Sahab, et al.
Foilsithe / Cruthaithe: (2023)

CO2 laser cutting performance on ultra high strength steel (UHSS)
de réir: M. Tahir, A. F., et al.
Foilsithe / Cruthaithe: (2020)

Experimental evaluation of physicochemical properties and tapping torque of hexagonal boron nitride in modified jatropha oils-based as sustainable metalworking fluids
de réir: Talib, N., et al.
Foilsithe / Cruthaithe: (2018)

Performance of modified jatropha oil in combination with hexagonal boron nitride particles as a bio-based lubricant for green machining
de réir: Talib, N., et al.
Foilsithe / Cruthaithe: (2018)

Rheological performance of magnetorheologcal grease with embedded graphite additives
de réir: Nur Alyaa Mohd Nasir, et al.
Foilsithe / Cruthaithe: (2021)

Intelligent approach for process modelling and optimization on electrical discharge machining of polycrystalline diamond
de réir: Pauline, Ong, et al.
Foilsithe / Cruthaithe: (2018)

Effect of WS₂ and TiO₂ nanoparticles on the tribological characteristics of ta-C coating
de réir: Yeoh, Chin Ean
Foilsithe / Cruthaithe: (2017)

Effect of electro-carburisation process on the tribological behavior of mild steel
de réir: Ling, Jester Lih Jie
Foilsithe / Cruthaithe: (2017)

Effect of electro-carburisation process on the tribological behavior of mild steel
de réir: Ling, Jester Lih Jie
Foilsithe / Cruthaithe: (2017)

Experimental analysis of tribological performance of modified jatropha oil enriched with nanoparticle additives for machining application
de réir: Jamaluddin, N. A., et al.
Foilsithe / Cruthaithe: (2021)

Surface roughness and surface topography of inconel 718 in powder mixed dielectric electrical discharge machining (PMEDM)
de réir: Ahmad, Said, et al.
Foilsithe / Cruthaithe: (2018)

The effect of chromium addition on fluidity, microstructure and mechanical properties of aluminum lm6 cast alloy
de réir: Ahmad, R
Foilsithe / Cruthaithe: (2018)

Comparative study of selected indoor concentration from selective laser sintering process using virgin and recycled polyamide nylon (pa12)
de réir: Damanhuri, A A M, et al.
Foilsithe / Cruthaithe: (2019)

Implementing virtual machine:a performance evaluation
de réir: Kamaludin, Hazalila, et al.
Foilsithe / Cruthaithe: (2019)

Design of pulse jet coolant delivery system for minimal quantity lubricant (IP MQL) operation
de réir: Sapian, Nik Fazli
Foilsithe / Cruthaithe: (2012)

Analysis of temperature distribution in disc brakes
de réir: Mohd Amin, Azriszul
Foilsithe / Cruthaithe: (2007)

Successive over relaxation technique for steady state and dynamic characteristics of a cylindrical bore bearing
de réir: Yaacob, Zaihar
Foilsithe / Cruthaithe: (2005)

Monitoring and prediction of bearing failure by acoustic emission and neural network
de réir: Mahamad, Abd Kadir
Foilsithe / Cruthaithe: (2005)

Design and development of a brake system using smart materials
de réir: Johar, Muhammad Akmal
Foilsithe / Cruthaithe: (2007)

Simulation and modeling of mixture formation under variant ambient condition and injection pressure of biodiesel spray
de réir: Andsaler, Adiba Rhaodah, et al.
Foilsithe / Cruthaithe: (2017)

Development of online speed trap system (DOSTS)
de réir: Ishak, Maizul
Foilsithe / Cruthaithe: (2006)

Amalan keselamatan bengkel dalam kalangan pelajar Kolej Vokasional Temerloh
de réir: Yusof, Mohd Khairul Azhar
Foilsithe / Cruthaithe: (2014)

Tribological investigations on the application of oil-miscible ionic liquids additives in modified Jatropha-based metalworking fluid
de réir: Amiril, S.A.S., et al.
Foilsithe / Cruthaithe: (2018)

Detection of fracture in ceramic cutting tools from workpiece proﬁle signature using image processing and fast Fourier transform
de réir: Lee, W.K., et al.
Foilsithe / Cruthaithe: (2016)

The peat swamp:Productivity, traficability and mechanization
de réir: Rahman, Mohammed Ataur, et al.
Foilsithe / Cruthaithe: (2012)

Low temperature thermochemical surface treatment of austenitic stainless steel for improved mechanical and tribological
de réir: Triwiyanto , Askar, et al.
Foilsithe / Cruthaithe: (2010)

Delamination-fretting wear failure evaluation at HAp-Ti-6Al-4V interface of artificial hip implant
de réir: Muniandy, Nagentrau
Foilsithe / Cruthaithe: (2021)

Fault diagnosis in rotating machinery using pattern recognition technique / Nor Azlan Othman, Nor Salwa Damanhuri and Visakan Kadirkamanathan
de réir: Othman, Nor Azlan, et al.
Foilsithe / Cruthaithe: (2009)

Three dimensional cutting force and tool deflection in micro-end milling AISI D2 / Noor Aniza Norrdin
de réir: Norrdin, Noor Aniza
Foilsithe / Cruthaithe: (2016)

Evaluation of mist flow characteristic and performance in Minimum Quantity Lubrication (MQL) machining
de réir: Abd Rahim, Erween, et al.
Foilsithe / Cruthaithe: (2018)

Mobile robot path planning using q-learning with guided Distance
de réir: Ee, Soong Low, et al.
Foilsithe / Cruthaithe: (2018)

Optimization of brake master production process (gravity die casting) / Muhamad Nor Sharizal Abd Rahman, Mior Shahrulnizam Mior Ahmad and Mohammad Azizi Abdullah
de réir: Abd Rahman, Muhamad Nor Sharizal, et al.
Foilsithe / Cruthaithe: (2001)

Braking behaviour among motorcyclist: comparison of the rear brake using hand braking type and leg braking type / Mohammad Hamidi Sinin
de réir: Sinin, Mohammad Hamidi
Foilsithe / Cruthaithe: (2010)

PSSDB load bearing wall with window opening - effect of butt joint in dryboard / Prof Madya Ir. Siti Hawa Hamzah …[et al.]
de réir: Hamzah, Siti Hawa (Prof. Madya Ir.), et al.
Foilsithe / Cruthaithe: (2003)

Variable Valve Timing / Rahmat Nizam Romzan, Mohd Hezrin Hashim and Norfazizi Razali
de réir: Romzan, Rahmat Nizam, et al.
Foilsithe / Cruthaithe: (2002)

A study of an elevator / Mohd Hasrizal Hassan, Mohd Shahril Mamat and Zakari Ismail
de réir: Hassan, Mohd Hasrizal, et al.
Foilsithe / Cruthaithe: (2002)

Multi planes balancing of rotating element / Muhammad Zuraidi Mohd Shukri
de réir: Mohd Shukri, Muhammad Zuraidi
Foilsithe / Cruthaithe: (2009)

Shape optimization of cantilever beam / Hamdan Abd Hamid
de réir: Abd Hamid, Hamdan
Foilsithe / Cruthaithe: (2005)

Effect of pre-seted residual stress on the spur gear / Alfonso Muze Jerol
de réir: Jerol, Alfonso Muze
Foilsithe / Cruthaithe: (2003)