| Summary: | Flight training operations is very important to world of aviation today because it is one of the important criteria that drive the industry forward. Many people start to involve themselves into the world of aviation to become a professional pilot, but there are lack of number of flying school available here in Malaysia. Therefore this study will discuss on the planning and future development of flight training operation in LTTL. This airport will be used later to aid in the process of training purpose in order to produce the professional pilot amongst UTHM student in the future. This development will include the design of facilities and the procedure of operation for flight training purposes in LTTL. The regulation from the responsible authority which is CAAM and ICAO has been followed in order to make sure all the facilities is built by following the regulations and its specification, and the procedure of operation for flight training is followed the rules fixed by the authorities body. The design of facility is being proposed and design by using Solidwork 2017, it is design based on the requirement needed by LTTL. Facility which is being propose is runway, hangar, air traffic control tower and fuel storage store. For the procedure of operation, the procedure for take-off and landing is being developed by following the procedure for VFR aircraft since in LTTL all aircraft is using VFR. Besides that, the airspace for LTTL is also being developed by referring to Malaysia’s airspace to identify allowable airspace for training area. The suggested length for runway is obtained based on MTOW of an aircraft. All of the design and procedure of operation is provided by following the regulation being set by authorities’ body
|
|---|