The influence of slag and PSAC on the wear resistance of composite aluminium
This research involves the fabrication of aluminum composite by using Palm Shell Activated Carbon (PSAC) and Boiler Slag as reinforcements. The method used is powder metallurgy. For aluminum composite fabrication process, set compaction pressure of 200 MPa and sintering temperature was at 500°c and...
Main Author: | Sulaiman, Zulkifli |
---|---|
Format: | Thesis |
Language: | English English |
Published: |
2013
|
Subjects: | |
Online Access: | http://eprints.uthm.edu.my/6646/1/24p%20ZULKIFLI%20SULAIMAN.pdf http://eprints.uthm.edu.my/6646/2/ZULKIFLI%20SULAIMAN%20WATERMARK.pdf |
Similar Items
-
The influence of slag and PSAC on the wear resistance of composite aluminium
by: Sulaiman, Zulkifli
Published: (2013) -
A preliminary study of turning of composites
by: Hassan, Nurhafizzah
Published: (2008) -
The effect of surface treatment on composite interface, tensile properties and water absorption of suger palm fiber/polypropylene composites
by: Wan Zahari, Wan Zubaidie
Published: (2017) -
Effect Of Heat Treatment And Equal Channel Angular Pressing On The Microstructures, Hardness And Wear Resistance Of A356 Aluminium Alloy With Tib2
by: Syukron, Muhammad
Published: (2016) -
Water permeability and carbonation on foamed concrete
by: Sulaiman, Suhaizad
Published: (2011)